Specific features of tool wear in adaptable drawing of capillary pipes
Source abstract
Abstract
The wear of tools was explored in adaptable drawing of capillary copper pipes. The method of finite elements served to calculate the strain in drawing and to reveal the intensified stress and rupture between these areas. The mandrel surface state was explored and the nature of wear including the galvanized layer. It has been revealed that wear localizes in the area of utmost stresses that rupture the interface between the working cone and calibrating mandrel belt.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Engineering Technology and Methodologies · Engineering and Environmental Studies · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Kolmogorov, G.L., Boyarkin, V.I., and Mishunin, I.M., Capillary tube drawing in the hydrodynamic friction regime, Tsvetnye Metally, 1974, no. 9, pp. 51–53.
2. Rubio, E.M., Gonzalez, C., Marcos, M., and Sebastiyan, M.A., Energetic analysis of tube drawing processes with fixed plug by upper bound method, J. Mater. Proc. Technol., 2006, vol. 177, pp. 175–178.10.1016/j.jmatprotec.2006.03.193 ↗
3. Kim, S.W., Kwon, Y.N., Lee, Y.S., and Lee, J.H., Design of mandrel in tube drawing process for automotive steering input shaft, J. Mater. Proc. Technol., 2007, vol. 187–188, pp. 182–186.10.1016/j.jmatprotec.2006.11.134 ↗
4. Swiatkowski, K. and Hatalak, R., Study of the new floating-plug drawing process of thin-walled tubes, J. Mater. Proc. Technol., 2004, vol. 151, pp. 105–114.10.1016/j.jmatprotec.2004.04.024 ↗
5. Loginov, Yu.N., Influence of the angle of functional area on the stress state in the deformation zone at copper drawing, Tsvetnye Metally, 2010, no. 3, pp. 94–97.
6. Loginov, Yu.N., Demakov, S.L., Illarionov, A.G., and Ivanova, M.A., Interaction of a copper oxide particle with copper in drawing, Russ. Metall. (Metally), 2012, no. 11, pp. 947–953.
7. Loginov, Yu.N., Demakov, S.L., Illarionov, A.G., Ivanova, M.A., and Shalaeva, M.S., Comparison of heat engineering copper structures in high cold worked and recrystallized conditions, Tsvetnye Metally, 2013, no. 8, pp. 92–96.
8. Osintsev, O.E. and Fedorov, V.N., Med’ i mednye splavy (Copper and Copper Alloys), Moscow: Mashinostroenie, 2004.
9. Bogorad, L.Ya., Khromirovanie (Chromium-Plating), Leningrad: Mashinostroenie, 1984.
10. Kolmogorov, V.L., Orlov, S.I., and Kolmogorov, G.L., Gidrodinamicheskaya podacha smazki (Hydrodynamic Oil Feeding), Moscow: Metallurgiya, 1975.
11. Kuznetsova, Yu.L., Skul’skii, O.I., and Sitnikova, M.A., Lubricant flow in pressure pipes during wire drawing in a hydrodynamic friction mode, J. Friction Wear, 2007, vol. 28, pp. 375–380.