journal article·2012-02

Calculation of six-lobe and eight-lobe deformable thrust sliding bearings

M. Yu. Temis, A. P. Lazarev

Journal of Friction and Wear· Volume 33· Issue 1
Publisher page

Abstract

The paper deals with the development of a model and the calculation of characteristics of a hydrodynamic thrust sliding bearing which provides the compensation of the axial force in high-speed and low-speed rotors of stationary gas turbine units. In the framework of creating a method for determining the stiffness and damping characteristics of the bearing and calculating the parameters of lubricant flow in the gap, we develop a model of the thrust bearing based on the coupled solution of the problem of the flow of incompressible lubricant between the sliding surfaces and the problem of the deformation of the bearing parts and the shaft under the lubricant pressure. The model makes it possible to find the basic characteristics of the thrust sliding bearing at various relative displacements of the bearing and shaft. The bearing model is verified by comparing our results with the results of calculating lubricant flow in the STAR-CD software package and the results of calculations and experiments reported in the literature. The stiffness and damping characteristics are calculated for two thrust sliding bearings with six and eight lobes, depending on the sliding surfaces closure and variations in the shaft rotation angle with account of the deformation of the sliding surfaces. A significant influence of the shaft rotation angles in the bearing section and the deformations of the sliding surfaces on the integral characteristics of the bearing is demonstrated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Lubrication Engineering · Technical Engine Diagnostics and Monitoring · Mechanics and Biomechanics Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Abdel’-Latif, P.Kh. and Benner, I., Thermohydrodynamic Calculation of Thrust Bearings with Circular Chocks on Oil Film Contained Bubbles of Gas, Probl. Treniya i Smazki, 1985, vol. 107, no. 4, pp. 94–102.
2. Kim, K.W., Tanaka, M., and Hori, Y.A., Three-Dimensional Analysis of Thermohydrodynamic Performance of Sector-Shaped, Tilting-Pad Thrust Bearings, J. Lubr. Technol., 1983, vol. 105, pp. 406–413.10.1115/1.3254625 ↗
3. Mote, C.D., Jr., Schajer, G.S., and Telle, L.I., Hydrodynamic Sector Bearings as Circular Saw Guides, J. Lubr. Technol., 1983, vol. 105, pp. 67–76.10.1115/1.3254551 ↗
4. Mahieux, C.A., Experimental Characterization of the Influence of Coating Materials on the Hydrodynamic Behavior of Thrust Bearing: A Comparison of Babbitt, PTFE, and PFA, Trans. ASME. J. Tribol., 2005, vol. 127, pp. 568–574.10.1115/1.1843160 ↗
5. Temis, J.M. and Temis, M.J., Influence of Elastohydrodynamic Contact Deformations in Fluid Film Bearing on High-Speed Rotor Dynamics, Proc. 2nd Int. Symp. on Stability Control of Rotating Machinery (ISCORMA-2), Gdansk, Poland, 2003, pp. 150–159.
6. Temis, J.M. and Temis, M.J., Contribution of Bearing Structure in Gas Turbine Power Unit Rotor Dynamics, Proc. 3rd Int. Symp. on Stability Control of Rotating Machinery (ISCORMA-3), Cleveland, USA, 2005, pp. 570–581.
7. Temis, Yu.M. and Temis, M.Yu., Stiffness and Damping Characteristics of Hydrodynamic Sliding Bearing with Deformable Working Surfaces, J. Friction Wear, 2007, vol. 28, no. 2, pp. 128–137.10.3103/S106836660702002X ↗
8. Petrov, N.P., Reinol’ds, O., Zommerfel’d, A., et al., Gidrodinamicheskaya teoriya smazki: Gidrodinamicheskaya teoriya smazki i ee primenenie k opytam Touera (Hydrodynamic Theory of Lubrication: Hydrodynamic Theory of Lubrication and Its Application to the Tower’ Experiments, Leibenson, L.S., Ed., Moscow: GTTI, 1934.
9. Temis, M.J. and Lazarev, A.P., Elastohydrodynamic Contact in Thrust Bearing, Proc. 6th Int. Conf. on Mechatronic Systems and Materials (MSM 2010), Opole, Poland, 2010, pp. 198–199.
10. Bathe, K.-J., Finite Element Procedures, New Jersey: Prentice Hall, 1995.