journal article·2021-10

Tribotechnical Properties of Nickel Based Cermet Materials

N. V. Sevostyanov, A. N. Bolshakova, T. A. Bolsunovskaya, N. P. Burkovskaya

Journal of Friction and Wear· Volume 42· Issue 5
Publisher page

Abstract

Traditional antifriction bearing materials based on bronze, steel, babbits, and cast iron do not meet the requirements of modern aviation technology. Sintered cermet materials are considered promising for use in heavily loaded friction units in the manufacturing of plain bearings. Cermet materials combine the hardness of ceramics, which provides high wear resistance, and the mechanical strength of metals. In this study, we investigated nickel matrix-based cermet materials with 60% reinforcement with a ceramic phase for various reinforcing filler materials: TiC, ZrO2, SiC, AlN, MoSi2, and Si3N4. A comprehensive study of the tribotechnical and mechanical properties of cermet materials synthesized by the method of spark plasma sintering with various ceramic fillers made it possible to establish the optimal characteristics for use as an antifriction material in plain bearing units. Tribotechnical tests of cermet materials in a friction pair with 95X18 steel showed a decrease in dependence and the smallest values of wear and friction coefficient in terms of load and sliding speed for materials with TiC and ZrO2 as fillers. The results of physical and mechanical tests of the materials are also given, including impact strength, density, bending strength, and microhardness. The best tribotechnical properties of those studied were shown by Ni–ZrO2 cermet, but, at the same time, its application in friction units is limited by low values of impact toughness and bending strength. The Ni–TiC cermets are characterized by an optimal combination of low values of friction coefficient and wear among the studied samples, as well as high impact toughness, bending strength, and microhardness for use as an antifriction material in friction units.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Material Properties and Applications · Polymer Science and Applications · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Kablov, E.N., Innovative developments of the All-Russian Scientific Research Institute of Aviation Materials within the project “Strategic development of materials and technologies of their recycling until 2030,” Aviats. Mater. Tekhnol., 2015, no. 1 (34), pp. 3–33. https://doi.org/10.18577/2071-9140-2015-0-1-3-3310.18577/2071-9140-2015-0-1-3-33 ↗
2. Kablov, E.N., New generation materials as a basis for innovations, technological advantage, and national safety of Russia, Intell. Tekhnol., 2016, no. 2 (14), pp. 16–21.
3. Buznik, V.M. and Kablov, E.N., Arctic materials science: current state and prospects, Herald Russ. Acad. Sci., 2017, vol. 87, no. 5, pp. 397–408.10.1134/S101933161705001X ↗
4. Kritskii, V.Yu. und Zubko, A.I., Possibile use of ceramic aircraft plain bearings of a new generation in the designs of rotor bearings for gas turbine engines, Dvigatel’, 2013, no. 3 (87), pp. 24–26.
5. Ivanov, E.V., Creation of wear-resistant and anti-friction materials and coatings for the Buran spacecraft, Aviats. Mater. Tekhnol., 2013, suppl. 1, pp. 142–151.
6. Solomentseva, A.V., Fadeeva, V.M., and Zhelezina, G.F., Antifriction organoplastics for heavily loaded sliding friction units of aircraft constructions, Aviats. Mater. Tekhnol., 2016, no. 2 (41), pp. 30–34. https://doi.org/10.18577/2071-9140-2016-0-2-30-3410.18577/2071-9140-2016-0-2-30-34 ↗
7. Farafonov, D.P., Migunov, V.P., and Alehsina, R.Sh., Tribotechnical characteristics of materials used for hardening of retaining shelves of gas-turbine engine blades, Aviats. Mater. Tekhnol., 2016, suppl. 1 (43), pp. 24–30. https://doi.org/10.18577/2071-9140-2016-0-S1-24-3010.18577/2071-9140-2016-0-S1-24-30 ↗
8. Kulagina, G.S., Korobova, A.V., Zuev, S.V., and Zhelezina, G.F., Tribological properties of organoplastics based on woven reinforcing filler, Tr. Vseross. Inst. Aviats. Mater., 2016, vol. 47, no. 11, art. 6. https://doi.org/10.18577/2307-6046-2016-0-11-6-6. http://www.viam-works.ru. Cited January 9, 2019.10.18577/2307-6046-2016-0-11-6-6 ↗
9. Pulvermetallurgie. Sinter- und Verbundwerkstoffe, Schatt, W., Ed., Leipzig: Verlag Grundstoffind, 1979.
10. Kislyi, P.S., Bodnaruk, N.I., Borovikova, M.S., et al., Kermety (Cermets), Kiev: Naukova Dumka, 1985.
11. Sorokin, O.Yu., Solntsev, S.St., Evdokimov, S.A., and Osin, I.V., Principles, possibilities, and prospective application of hybrid spark plasma sintering, Aviats. Mater. Tekhnol., 2014, suppl. 6, pp. 11–16. https://doi.org/10.18577/2071-9140-2014-0-s6-11-1610.18577/2071-9140-2014-0-s6-11-16 ↗
12. Grashchenkov, D.V., Efimochkin, I.Yu., and Chere-panin, R.N., Highly filled metal composite materials on an intermetallic matrix with carbide and oxide hardening, Konstr. Kompoz. Mater., 2015, no. 2 (138), pp. 23–26.
13. GOST (State Standard) 9450–76: Measurements Microhardness by Diamond Instruments Indentation, Moscow: Izd. Standartov, 1977.
14. Weinberg, F., Tools and Techniques in Physical Metallurgy, New York: Marcel Dekker, 1970, vol. 1.
15. ASTM G99–05 (Reapproved 2010): Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, West Conshohocken, PA: ASTM Int., 2010.
16. Kuksenova, L.I., Lapteva, V.G., Kolmakov, A.G., and Rybakova, L.M., Metody ispytaniya na trenie i iznos (Testing for Friction and Wear), Moscow: Intermet Inzhiniring, 2001.