journal article·2019-01

Evaluation of the Tribotechnical Characteristics of Therma-Barrier Sealing Coatings under Critical Loads

V. O. Boguslaev, V. L. Greshta, D. V. Tkach, V. I. Kubich, E. G. Sotnikov, Z. V. Lekhovitser, O. V. Klymov

Journal of Friction and Wear· Volume 40· Issue 1
Publisher page

Abstract

This article deals with the initial stage of a comprehensive multifactor study of the wear resistance of thermal-barrier sealing coatings in the turbine of a gas turbine engine (GTE) under critical loads without taking into account the effect of structural phase transformations that can occur in coating materials during engine start-up and the subsequent long exposure of the GTE parts to high temperatures of about 1150°C. In compliance with the requirements of the GOST 30 480–97 state standard, the process of wear intrinsic to the full-scale tribological conjugation was simulated to obtain frictional-wear characteristics such as the friction coefficient, wear rate, and friction work under preset conditions that were used for further analysis of the wear process and acquisition of the initial data for field trials. The results of the above tribotechnical tests allow us to draw some tentative conclusions on the effect of alloying the nickel-based sealing coatings by yttrium-containing alloying compositions on their behavior during the tribological interaction and propose coating compositions that can be recommended for the subsequent stages of the study of the durability of sealing coatings under high-temperature conditions accompanied by volumetric changes in products and coatings as a result of structural phase transformations in multicomponent coating compositions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Science and Applications · Material Properties and Applications · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Kofman, V.M., The efficiency coefficient of the GTE turbine by the parameters of non-uniform gas flows, Vestn. Ufimsk. Gos. Aviats. Tekh. Univ., Aviats. Raketno-Kosm. Tekhn., 2012, vol. 16, no. 5 (50), pp. 28–40.
2. Sporer, D., Wilson, S., and Dorfman, M., Ceramics for Abradable Shroud Seal Applications, Ceramic Engineering and Science Proceedings Series, New York: Wiley, 2009.10.1002/9780470584293.ch5 ↗
3. Inozemtsev, A.A., Bazhin, S.V., and Snitko, M.A., Optimization of the radial clearances of the turboprop engine of an aviation GTE, Vestn. Dvigatelestr., 2012, no. 2, pp. 149–154.
4. Karpinos, B.S., Korovin, A.V., Lobun’ko, A.P., and Vedishcheva, M.Yu., Operational damages of turbojet bypass aircraft engines with afterburner combustion chamber, Vestn. Dvigatelestr., 2014, no. 1, pp. 18–24.
5. Bounazef, M., Guessasma, S., and Ait Saadi, B., The wear, deterioration and transformation phenomena of abradable coating BN–SiAl-bounding organic element caused by the friction between the blades and the turbine casing, Mater. Lett., 2004, vol. 58, pp. 3375–3380.10.1016/j.matlet.2004.02.049 ↗
6. Clegg, M.A. and Mehta, M.H., NiCrAl/bentonite thermal spray powder for high temperature abradable seals, Surf. Coat. Technol., 1988, vol. 34, pp. 69–77.10.1016/0257-8972(88)90090-4 ↗
7. Gao, S., Xue, W., Duan, D., and Li, S., Tribological behaviors of turbofan seal couples from friction heat perspective under high-speed rubbing condition, Friction, 2016, vol. 4, no. 2, pp. 176–190.10.1007/s40544-016-0114-x ↗
8. Sotnikov, E.G., Lekhovitser, Z.V., Greshta, V.L., Klimov, A.V., and Tkach, D.V., Development of the composition of the heat-shielding coating on the parts of gas-turbine engines operating at high temperatures, Aviats.-Kosm. Tekhn. Tekhnol., 2015, no. 10 (127), pp. 6–10.
9. Boguslaev, V.A., Zhemanyuk, P.D., Greshta, V.L., Sotnikov, E.G., Lekhovitser, Z.V., et al., Analysis of heat resistance of heat-protective sealing coatings during doping by combined ligatures, Aviats.-Kosm. Tekhn. Tekhnol., 2017, no. 8 (143), pp. 61–67.
10. GOST (State Standard) 30 480–97: Products Wear Resistance Assurance. Methods of Wear Resistance Tests. General Requirements, Moscow: Izd. Standartov, 1997.
11. Kubich, V.I., Dimensionless complex of evaluation parameters of the rapprochement of the surfaces of model friction joints through lubricating layers, Trudy nauchno-tekhnicheskoi konferentsii “Nauka. Tekhnologiya. Proizvodstvo” (Proc. Sci.-Tech. Conf. “Science. Technology. Manufacturing”), St. Petersburg, 2015, no. 3 (7), pp. 75–79.
12. GOST (State Standard) 10 851-94: Friction Articles of Retinax. Specifications, Moscow: Izd. Standartov, 1995.
13. Golubev, Y.A. and Ivanenko, V.V., A calculation method of energy intensity of brake lining wear as related to temperature, J. Frict. Wear, 2009, vol. 30, no. 4, pp. 258–260.10.3103/S1068366609040059 ↗
14. GOST (State Standard) 27674–88: Friction, Wear and Lubrication. Terms and Definitions, Moscow: Izd. Standartov, 1988.