Impact of plasma hardening on the wear resistance of 38XC steel
Source abstract
Abstract
The impact of plasma hardening on the wear resistance of 38XC steel was studied. It has been found that the wear resistance increases by 53.7 times under the condition of dry friction compared to the normalized state and by 12.7 times compared to the improved state. During plasma hardening, the wear of 38XC steel under dry friction is equal to the normalized steel 15 with lubrication; and the wear is not increased in case of a 1.5-fold increase in the load. The addition of HADO revitalizant to oil contributed to an approximately twofold decrease in the wear of 38XC steel with plasma hardening during wearing-in after cutting off the lubricant.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Surface Treatment and Coatings · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (4)
Show source-provided references
1. Korotkov, V.A., Plasma quenching of gear and slotted couplings, Russ. Eng. Res., 2009, vol. 29, no. 8, pp. 813–816.10.3103/S1068798X09080139 ↗
2. Kusenkova, L.I., Lapteva, V.G., Ivanov, V.A., and Konyzhev, M.E., Effect of microplasma treatment on the properties of the near-surface layer of samples from structural alloys, Trenie Smazka Mash. Mekh., 2009, no. 5, pp. 10–16.
3. Korotkov, V.A. and Zlokazov, M.V., Studying wear resistance of carbon steels strengthened by plasma hardening, J. Frict. Wear, 2014, vol. 35, no. 2, pp. 133–136.10.3103/S1068366614020068 ↗
4. Mel’nichenko, I.M., Gribailo, A.P., and Zamyatin, V.O., The effect of solid fillers on the efficiency of greases, Trenie Iznos, 1980, vol. 1, no. 4, pp. 674–679.