journal article·2012-02

A new class of lubricants based on stable dispersions of solid nanosized powders

V. V. Alisin, B. V. Pokid’ko, G. A. Simakova

Journal of Friction and Wear· Volume 33· Issue 1
Publisher page

Abstract

At present, the possibilities of improvement of the operating characteristics of greases via application of traditional technologies, including introduction of powder fillers of soft metals and solid lubricants, are exhausted. The paper reports the findings of experimental testing of a grease obtained by chemical grinding of aggregates of solid aluminosilicate nanosized powders and their uniform distribution through the volume by wave technology. It is found that the wear resistance of the steel friction surfaces increases at least two-fold and the coefficient of friction of the studied pairs declines with application of the grease containing solid nanosized aluminosilicate particles. The efficiency of lubrication with the tested grease after a single application significantly surpasses the respective characteristics of the best commercial greases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Science and Applications · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Bogdanov, V.M., Strategic Program of Securing of Stable Interaction of Wheel-Rail System, Sb. dokl. nauch.-praktich. konf. “Sovremennye problemy vzaimo-deistviya podvizhnogo sostava i puti” (Proc. Sci.-Pract. Conf. “Contemporary Problems of Rolling Stock and Railway Track Interaction”), Rossiya, Shcherbinka, 2003, pp. 14–20.
2. Luczak, M., Lubrication of Rails as Means of Reduction of Noise, Railway Age, 1999, no. 1, pp. 51–52.
3. Vityaz, P.A., Zhornik, V.I., Kukareko, V.A., and Belotserkovsky, M.A., Tribomechanical Modification of Friction Surface by Running-In in Lubricants with Nano-Sized Diamonds, New York: Nova Publishers, 2010.
4. Osiko, V.V., Alisin, V.V., Vishnyakova, M.A., et al., Investigation of Tribological Properties of Zirconium Dioxide Based Nanocrystalline Material of a New Generation, J. Friction Wear, 2005, vol. 26, no. 3, pp. 285–289.
5. Yakushkina, V.S., Korableva, E.A., Savanina, N.N., et al., Effect of Sintering Technology on Wear-Resistance of Ceramics from Nanostructured Powders of Partially Stabilized Zirconia-Based (PSZ) Ceramics, Probl. Mashin. Nadezhn. Mashin, 2010, no. 1, pp. 94–99.
6. Pokid’ko, B.V., Tutorskii, I.A., Bitt, V.V., et al., Adsorption of Alkidmetilbenzilammonium Chloride by Layered Silicates from Different Deposits and Some Properties of Organobentonites, Kolloid. Zh., 2009, vol. 71, no. 6, pp. 792–797.
7. Patel, H.A., Soman, R.S., Bajaj, H.C., and Jasra, R.V., Nanoclays for Polymer Nanocomposites, Bull. Mater. Sci., 2006, vol. 29, pp. 133–145.10.1007/BF02704606 ↗
8. Ganiev, R.F., Volnovye mashiny i tekhnologii (Vvedenie v volnovuyu tekhnologiyu) (Wave Machines and Technologies. Introduction in Wave Technology), Moscow: Nauch. Izd. Tsentr “Regul. Khaot. Dinam.”, 2008.
9. Metody eksperimental’noi otsenki friktsionnoi sovmestimosti materialov trushchikhsya sopryazhenii (Methods of Experimental Estimation of Material Compatibility of Friction Joints), Metodicheskie Ukazaniya RD 50-662-88
10. Buyanovskii, I.A., Boundary Lubrication by an Adsorption Layer, J. Friction Wear, 2010, vol. 31, no. 1, pp. 33–47.10.3103/S1068366610010046 ↗
11. Alisin, V.V., Nanostructural Technical Crystals and Ceramics for Friction Joints, Trenie Smazka Mash. Mekh., 2007, no. 9, pp. 21–27.
12. Ur’ev, N.B. and Potanin, A.A., Tekuchest’ suspenzii i poroshkov (Fluidity of Suspensions and Powders), Moscow: Khimiya, 1992.
13. Janek, M. and Lagaly, G., Interaction of a Cationic Surfactant with Bentonite: A Colloid Chemistry Study, Colloid. Polym. Sci., 2003, vol. 281, pp. 293–301.10.1007/s00396-002-0759-z ↗