journal article·2014-07

Structure and tribological behavior of nanocomposite C-Ti-WSe x coatings

S. N. Grigoriev, R. I. Romanov, V. Yu. Fominski, M. A. Volosova, E. A. Zhukova

Journal of Friction and Wear· Volume 35· Issue 4
Publisher page

Abstract

Nanocomposite thin C-Ti-WSe x coatings, which contain antifriction (WSe x and amorphous carbon a-C) and hard (β-WC and TiC) components, are produced by pulsed laser deposition. In order to improve the tribological characteristics of the WSe x phase and to transform the structural state of the a-C matrix, alloying with titanium is used. The characteristics of the coatings are determined using the sliding of a steel ball at an increased humidity. A comparison of the characteristics of a composite C-Ti-WSe x coating and a carbon coating alloyed with titanium (a-C(Ti)) shows that the modification of the a-C matrix by introducing the WSe x phase leads to an increase in the coefficient of friction from 0.05 to 0.2; the wear of the composite coating is approximately six times higher than that of the a-C(Ti) coating. Possible solutions for improving the tribological characteristics of the composite C-Ti-WSe x coating in humid air are considered.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Kovalev, E.P., Ignat’ev, M.B., Semenov, A.P., Smirnov, N.I., Nevolin, V.N., and Fominskii, V.Yu., Solid-lubrication coatings for machines and mechanisms working in extremal conditions, Trenie Iznos, 2004, vol. 25, pp. 337–343.
2. Romanov, R.I., Fominskii, V.Yu., Baskakov, D.E., Matsnev, N.P., and Sharf, V., Triboengineering properties of nanocomposites W-Se-C-coatings on steel during tests in the air, Trenie Iznos, 2004, vol. 25, pp. 57–62.
3. Polcar, T. and Cavaleiro, A., Review on self-lubricant transition metal dichalcogenide nanocomposite coatings alloyed with carbon, Surf. Coat. Technol., 2011, vol. 206, pp. 686–695.10.1016/j.surfcoat.2011.03.004 ↗
4. Nyberg, H., Sundberg, J., Sarhammar, E., Gustavsson, F., Kubart, T., Nyberg, T., Jansson, U., and Jacobson, S., Extreme friction reductions during initial running-in of W-S-C-Ti low-friction coatings, Wear, 2013, vol. 302, pp. 583–589.10.1016/j.wear.2013.01.051 ↗
5. Zhang, X., Vitchev, R.G., Lauwerens, W., Stals, L., He, J., and Celis, J.-P., Effect of crystallographic orientation on the fretting wear behavior of MoSx coatings in dry and humid air, Thin Solid Films, 2001, vol. 396, pp. 69–77.10.1016/S0040-6090(01)01141-5 ↗
6. Jing, Y., Luo, J., and Pang, S., Effect of Ti or TiN codeposition on the performance of MoS2-based composite coatings, Thin Solid Films, 2004, vol. 461, pp. 288–293.10.1016/j.tsf.2004.02.044 ↗
7. Savan, A., Simmond, M.C., Huang, Y., Constable, C.P., Creasey, S., Gerbig, Y., Haefke, H., and Lewis, D.B., Effects of temperature on the chemistry and tribology of Co-sputtered MoSx-Ti composite thin films, Thin Solid Films, 2005, vol. 489, pp. 137–144.10.1016/j.tsf.2005.04.078 ↗
8. Fominski, V.Yu., Grigoriev, S.N., Gnedovets, A.G., and Romanov, R.I., Pulsed laser deposition of composite Mo-Se-Ni-C coatings using standard and shadow mask configuration, Surf. Coat. Technol., 2012, vol. 206, pp. 5046–5054.10.1016/j.surfcoat.2012.06.004 ↗
9. Hong, C., Tu, J., Liu, D., Li, R., and Gu, C., The electrochemical and mechanical properties of Ti incorporated amorphous carbon films in Hanks’ solution, Appl. Surf. Sci., 2010, vol. 256, pp. 4859–4866.10.1016/j.apsusc.2010.03.041 ↗
10. Grigoriev, S.N., Fominski, V.Yu., Romanov, R.I., and Volosova, M.A., Structural modification and tribological behavior improvement of solid lubricating WSex coatings during pulsed laser deposition in buffer Hegas, J Friction Wear, 2013, vol. 34, pp. 262–269.10.3103/S1068366613040053 ↗
11. Grigoriev, S.N., Romanov, R.I., and Fominskii, V.Yu., Dependence of mechanical and tribological properties of diamond-like carbon coatings on laser deposition conditions and alloying by metals, J. Friction Wear, 2012, vol. 33, pp. 253–259.10.3103/S1068366612040034 ↗
12. Bharathy, P.V., Yang, Q., Kiran, M.S.R.N., Rha, J.J., Nataraj, D., and Mangalaraj, D., Reactive biased target ion beam deposited W-DLC nanocomposite thin films—microstructure and its mechanical properties, Diamond Relat. Mater., 2012, vol. 23, pp. 34–43.10.1016/j.diamond.2011.12.016 ↗