journal article·2020-11

Surface Modification Features of Tool Steels by Laser Radiation

A. V. Sidashov, A. T. Kozakov, V. I. Kolesnikov, D. S. Manturov, S. I. Yaresko

Journal of Friction and Wear· Volume 41· Issue 6
Publisher page

Abstract

In this paper, we present the study results of the surface layers of carbon steels U8 and U10 performed by X-ray photoelectron spectroscopy after laser exposure. The thicknesses of oxidized surface layers were determined to be 43 nm and 108 nm for U8 and U10 steels, respectively. Both the total thickness of the formed oxide film and its phase composition (FeO, Fe2O3, Fe3O4) with depth were found to change depending on the concentration of iron, oxygen, and carbon atoms in the considered steels. The “layer” structure effect of the oxides of the layer modified by laser irradiation on the frictional characteristics of steels is shown. In particular, the presence of FeO oxide on the U8 steel surface increases the wear characteristics, while the presence of Fe2O3 and Fe3O4 oxides provides a higher wear resistance of steel U10 compared to an unirradiated steel surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Engineering Technology and Methodologies · Surface Treatment and Coatings · Tribology and Lubrication Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Myshkin, N.K. and Goryacheva, I.G., Tribology: trends in the half-century development, J. Frict. Wear, 2016, vol. 37, no. 6, pp. 513–516.10.3103/S106836661606009X ↗
2. Kozakov, A.T., Yares’ko, S.I., Kolesnikov, V.I., and Sidahsov, A.V., Surface compositions of 9XC and R6M5 tool steels after laser pulse irradiation according to X‑ray photoelectron spectroscopy data, J. Surf. Invest.: X-Ray, Synchrotron Neutron Tech., 2011, vol. 5, no. 3, pp. 431–439. https://doi.org/10.1134/S102745101105008910.1134/S1027451011050089 ↗
3. Sidashov, A.V., Kozakov, A.T., and Yaresko, S.I., Auger and X-ray photoelectron spectroscopy study of the tribocontact surface after laser modification, Mater. Sci. Forum, 2016, vol. 870, pp. 298–302. https://doi.org/10.4028/www.scientific.net/MSF.870.29810.4028/www.scientific.net/MSF.870.298 ↗
4. Yang, J., Lian, J., Bai, H., et al., Cr2O3 film formed by surface oxidation of stainless steel irradiated by a Nd-YAG pulsed laser, ISIJ Int., 2005, vol. 45, no. 5, pp. 730–735. https://doi.org/10.2355/isijinternational.45.73010.2355/isijinternational.45.730 ↗
5. Bulgarevich, S.B., Boiko, M.V., Kolesnikov, V.I., and Feizova, V.A., Thermodynamic and kinetic analyses of probable chemical reactions in the tribocontact zone and the effect of heavy pressure on evolution of adsorption processes, J. Frict. Wear, 2011, vol. 32, no. 4, pp. 301–309.10.3103/S1068366611040027 ↗
6. Practical Surface Analysis, Auger and X-ray Photoelectron Spectroscopy, Briggs, D. and Seah, M.P., Eds., Chichester: Wiley, 1983.
7. Nefedov, V.I., Rentgenoelektronnaya spektroskopiya khimicheskikh soedinenii (X-Ray Electron Spectroscopy of Chemical Compounds), Moscow: Khimiya, 1984.
8. Yamashita, T. and Hayes, P., Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials, Appl. Surf. Sci., 2008, vol. 254, pp. 2441–2449.10.1016/j.apsusc.2007.09.063 ↗
9. Castle, J.E., Use of X-ray photoelectron in corrosion science, Surf. Sci., 1977, vol. 68, no. 1, pp. 583–602.10.1016/0039-6028(77)90250-3 ↗
10. Alfredsson, B., A study on contact fatigue mechanisms, PhD Thesis, Stockholm: Royal Inst. Technol., 2000.