journal article·2019-01Open access

Improving Abrasive Wear Resistance for Steel Hardox 400 by Electro-Spark Deposition

E. Katinas, V. Jankauskas, N. Kazak, V. Michailov

Journal of Friction and Wear· Volume 40· Issue 1

Abstract

Abstract The mechanical and tribological properties of the steel Hardox 400 after electro-spark deposition (ESD) using electrodes made of hard-alloy carbides T15K6 (79% WC + 15% TiC + 6% Co), WK6 (94% WC + 6% Co), and composite materials based on iron such as 12S2 (12% Ni + 2% Si + 15% Cr3C2 + 71% Fe), K4F (15% WK3 (97 WC + 3 Co) + 4% Cr3C2 + 1% V + 80% Fe), and tungsten disilicide WSi2 (76.6% W; 23.4% Si) have been studied. The energy parameters (the energy of pulsed discharges, the amplitude and repetition rate thereof) and technological parameters (the type of processing electrode motion, vibration or vibration/rotation) for the ESD process, as well as the electrode composition at which the highest quality surface layers with high wear resistance is observed, have been optimized. The effect of the energy and technological parameters of the ESD process exerted on the properties of the coatings obtained has been determined. The studies have shown that coatings of WC–TiC–Co and WC–Co applied onto steel Hardox 400 exhibit a twofold decrease in abrasive wear. At the same time, it has been found that the wear resistance of composite coatings is sufficiently affected by the application modes (up to a 2.5-fold decrease in the wear level), and the coatings made of composites 12S2 and K4F are competitive with respect to coatings made of hard alloys based on tungsten carbides.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Coatings · Metal Alloys Wear and Properties · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K., and Erdemir, A., Global energy consumption due to friction and wear in the mining industry, Tribol. Int., 2017, vol. 115, pp. 116–139.10.1016/j.triboint.2017.05.010 ↗
2. Holmberg, K. and Erdemir, A., Influence of tribology on global energy consumption, costs and emissions, Friction, 2017, vol. 5, no. 3, pp. 263–284.10.1007/s40544-017-0183-5 ↗
3. Jankauskas, V. and Belyaev, S., Influence of counterbody surface hardness of a friction pair “steel-steel” on tribological behavior of zinc nanopowder in oil, Mechanika, 2010, vol. 3, no. 83, pp. 45–50.
4. Jankauskas, V., Katinas, E., Skirkus, R., and Alekneviciene, V., The method of hardening soil rippers by surfacing and technical-economic assessment, J. Frict. Wear, 2014, vol. 35, no. 4, pp. 270–277.10.3103/S106836661404014X ↗
5. Torrance, A.A., Modeling abrasive wear, Wear, 2005, vol. 258, pp. 281–293.10.1016/j.wear.2004.09.065 ↗
6. Lazarenko, N.I., Changes in the initial properties of the cathode surface affected by spark electric pulses flowing in a gaseous medium, in Elektroiskrovaya obrabotka metallov (Electrosparking Treatment of Metals), Moscow: Akad. Nauk SSSR, 1957, pp. 70–94.
7. Lazarenko, N.I., Changing the initial properties of metal surfaces by electric pulses, in Elektroiskrovaya obrabotka metallov (Electrospark Treatment of Metals), Moscow: Akad. Nauk SSSR, 1960, no. 2, pp. 26–66.
8. Kreivaitis, R., Žunda, A., Kupčinskas, A., and Jankauskas, V., A study of tribological behavior of W–Co and Cu electro-spark alloyed layers under lubricated sliding conditions, Tribol. Int., 2016, vol. 103, pp. 236–242.10.1016/j.triboint.2016.07.010 ↗
9. Padgurskas, J., Kreivaitis, R., Rukuiža, R., Mihailov, V., and Baltušnikas, A., Tribological properties of coatings obtained by electro-spark alloying C45 steel surfaces, Surf. Coat. Technol., 2017, vol. 311, pp. 90–97.10.1016/j.surfcoat.2016.12.098 ↗
10. Hong, X., Feng, K., Tan, Y.-F., Wang, X.-L., and Tan, H., Effects of process parameters on microstructure and wear resistance of TiN coatings deposited on TC11 titanium alloy by electrospark deposition, Trans. Nonferrous Met. Soc. China, 2017, vol. 27, no. 8, pp. 1767–1776.10.1016/S1003-6326(17)60199-7 ↗
11. Tang, J., Mechanical and tribological properties of the TiC–TiB2 composite coating deposited on 40Cr-steel by electro spark deposition, Appl. Surf. Sci., 2016, vol. 365, pp. 202–208.10.1016/j.apsusc.2015.12.198 ↗
12. Gitlevich, A.E., Mikhailov, V.V., Parkanskii, N.Ya., and Revutskii, V.M., Elektroiskrovoe legirovanie metallicheskikh poverkhnostei (Electrospark Alloying of Metal Surfaces), Chisinau: Shtiintsa, 1985.