Research of the mechanism and development of the wear model of a diamond tool when turning aluminum-matrix composite materials
Source abstract
Abstract
The results of a study of the wear mechanism of diamond tools for turning aluminum-matrix composite materials (ACMs) hardened by Al2O3, SiC, and B4C particles are presented. The study of the posterior surface topography of a diamond tool (ASPK-2) shows the presence of parallel scratches in the direction of the vector of the cutting speed; it is characteristic of abrasive wear fatigue. Research on the mass-transfer of the elements of the tool material into the chips of the treated material is carried out; it shows the presence of particles of the tool material of a size comparable to the ACM filler microparticles. The model of the abrasive-wear fatigue of a diamond tool during the turning of ACMs, considering the power of the impact of the reinforcement particles, the hardness of the tool depending on the temperature in the cutting zone, the abrasiveness, and the mass fraction of the dispersed particles reinforcing the matrix and tool geometry is proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Tunneling and Rock Mechanics · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Aborkin, A.V., Ryabkova, V.V., and Abramov, D.V., Friction and wear of nitride and carbide coatings in contact with aluminum, J. Frict. Wear, 2013, vol. 34, no. 4, pp. 294–301.10.3103/S1068366613040028 ↗
2. Aborkin, A.V., Ryabkova, V.V., and Elkin, A.I., Deformation curves for multicomponent nitride and carbide coatings, J. Frict. Wear, 2015, vol. 36, no. 4, pp. 273–279.10.3103/S1068366615040029 ↗
3. Li, X.P. and Seah, K.H.W., Tool wear acceleration in relation to workpiece reinforcement percentage in cutting of metal matrix composites, Wear, 2001, vol. 247, no. 2, pp. 161–171.10.1016/S0043-1648(00)00524-X ↗
4. Zalesnov, A.I., Petukhov, E.N., and Podshivalkin, V.A., Endurance tests of diamond tools in the turning of aluminum composites reinforced by nano- and microparticles, Rus. Eng. Res., 2014, vol. 34, no. 7, pp. 475–479.10.3103/S1068798X14070168 ↗
5. Loladze, T.N., Prochnost’ i iznosostoikost’ rezhushchego instrumenta (Strength and Wear of Cutting Tool), Moscow: Mashinostroenie, 1982.
6. Kannan, S., Kishawy, H.A., and Balazinski, M., Flank wear progression during machining metal matrix composites, J. Manuf. Sci. Eng., 2006, vol. 128, no. 3, pp. 787–791.10.1115/1.2164508 ↗
7. Tkhagapsoev, Kh.G., Khapachev, B.S., and Khapachev, Yu.P., The mechanisms of diamond wear in the diamond tool, Almazy Sverkhtverd. Mater., 1982, no. 3, pp. 3–6.
8. Sheiko, M.N., Abrasive wear of individual grits in diamond rollers and sticks and its relation to the overall tool wear in dressing operations, J. Superhard Mater., 2007, vol. 29, no. 6, pp. 369–374.10.3103/S106345760706007X ↗
9. Panfilov, A.V., Petrunin, A.V., and Panfilov, A.A., Synthesis, structure and properties of bulk nanostructure alumina matrix composite structural materials, Nanotekhnika, 2007, vol. 11, no. 3, pp. 76–81.
10. Bakul’, V.Ya., Loshak, M.G., and Mal’te, V.I., The microhardness of a diamond and its temperature dependence, Sint. Almazy, 1978, no. 1, pp. 7–11.
11. Petukhov, E.N., Zalesnov, A.I., and Aborkin, A.V., Analysis of turning machinability of dispersionstrengthened aluminum matrix composites, Naukoemkie Tekhnol. Mashinostr., 2014, vol. 40, no. 10, pp. 14–19.