Application of laser surface engineering to solve tribological problems
Source abstract
Abstract
The methods of laser surface engineering, including laser cladding, laser alloying from predeposited layers, and laser alloying from the gas phase have been applied to increase the wear resistance and decrease the coefficient of friction of metallic surfaces. Laser cladding has been applied to deposit metal matrix composites that consist of CuSn, stellite, stainless steel, and bronze, which act as solid lubricant reinforced with nanostructured WC ceramics with Co binding. Laser alloying of bearing steel with Sn increases the lifetime of oil turbo drills. Wear tests of Ti alloys doped with nitrogen from a gas atmosphere have demonstrated a viable possibility to apply the developed method to fabricate frictional couples.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Coatings · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Gladush, G. and Smurov, I., Laser Processing of Materials: Theory, Experiment, Berlin: Springer-Verlag, 2011.10.1007/978-3-642-19831-1 ↗
2. Steen, W.M. and Mazunder, J., Laser Material Processing, Berlin: Springer-Verlag, 2010.10.1007/978-1-84996-062-5 ↗
3. Herziger, G. and Kreutz, E.W., Fundametals of laser microprocessing of metals, Phys. Scripta, 1986, vol. 13, pp. 139–146.10.1088/0031-8949/1986/T13/023 ↗
4. Draper, C.W. and Poate, J.M., Laser surface alloying, Int. Metals Rev., 1985, vol. 30, pp. 85–108.
5. Grigor’ev, S.N., Tarasova, T.V., Gvozdeva, G.O., and Nowotny, S., Micro-laser facing of Al-Si system alloys, Metal Sci. Heat Treat., 2013, vol. 55, pp. 242–246, DOI: 10.1007/s11041-013-9613-9.10.1007/s11041-013-9613-9 ↗
6. Ion, J.C., Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application, Amsterdam: Elsevier/Butterworth-Heinemann, 2005.
7. Tarasova, T.V. and Popova, E.V. Formation of coatings by a method of overlay laser welding of powders of titanium and silicon carbide on a surface of low-carbon steel, Metallofiz. Nov. Tekhnol., 2013, vol. 35, pp. 1487–1500.
8. Toyserkani, E., Khajepour, A., and Corbin, S., Laser Cladding, Boca Raton: CRS, 2005.
9. de Oliveira, U., Ocelik, V., and de Hosson, J.Th.M., Analysis of coaxial laser cladding processing conditions, Surf. Coatings Technol., 2005, vol. 197, pp. 127–136, DOI: 10.1016/j.surfcoat.2004.06.029.10.1016/j.surfcoat.2004.06.029 ↗
10. Jehnming, L., Temperature analysis of the powder streams in coaxial laser cladding, Optics Laser Technol., 1999, vol. 31, pp. 565–570, DOI: 10.1016/S0030-3992(99)00115-2.10.1016/S0030-3992(99)00115-2 ↗
11. Smurov, I., Doubenskaia, M., Grigoriev, S., and Nazarov, A., Optical monitoring in laser cladding of Ti6Al4V, J. Thermal Spray Technol., 2012, vol. 21, pp. 1357–1362, DOI: 10.1007/s11666-012-9808-4.10.1007/s11666-012-9808-4 ↗
12. Doubenskaya, M., Pavlov, M., Grigoriev, S., and Smurov, I., Definition of brightness temperature and restoration of true temperature in laser cladding using infrared camera, Surf. Coatings Technol., 2013, vol. 220, pp. 244–247, DOI: 10.1016/j.surfcoat.2012.10.044.10.1016/j.surfcoat.2012.10.044 ↗
13. De Hosson, J.Th.M. and Ocelik, V., Functionally graded materials produced with high power lasers, Proc. ASTRA-2003, Hyderabad, India, 2003, pp. 368–376.
14. Shoufeng, Y. and Evans, Ju.R.G., A multi-component powder dispensing system for three dimensional functional gradients, Mater. Sci. Eng. A, 2004, vol. 379, pp. 351–359.10.1016/j.msea.2004.03.047 ↗
15. Doubenskaya, M., Pavlov, M., Grigoriev, S., and Smurov, I., Complex analysis of elaboration of steel-TiC composites by direct metal deposition, J. Laser Appl., 2013, vol. 25, p. 042009, DOI: 10.2351/1.4807624.10.2351/1.4807624 ↗