journal article·2011-06

Antifriction nanocomposites based on chemically modified UHMWPE. Part 1. Mechanical and tribological properties of chemically modified UHMWPE

S. V. Panin, L. A. Kornienko, S. Piriyaon, L. R. Ivanova, S. V. Shil’ko, Yu. M. Pleskachevskii, V. M. Orlov

Journal of Friction and Wear· Volume 32· Issue 3
Publisher page

Abstract

The mechanical and tribological properties of chemically modified UHMWPE are studied. X-ray diffraction analysis, IR spectroscopy, scanning differential calorimetry, and electron emission are used to study the permolecular structure and friction surface of polymers with different amounts of copolymers UHMWPE and LDPE grafted with maleic anhydride. Addition of grafted UHMWPE is shown to have no effect on the viscoelastic properties of the polymer-polymer composite, while the addition of grafted LDPE noticeably improves its performance (ductility, plasticity) while retaining its strength. Chemical modification of UHMWPE significantly improves its wear resistance (two to three times), which is due to the features of polymer crystallization and the formation of a permolecular structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Orthopaedic implants and arthroplasty · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Mashkov, Yu.K. and Kropotin, O.V., Tribofizika i strukturnaya modifikatsiya materialov tribosistem (Tribophysics and Structure Modification of Tribosystem Materials), Omsk: Izd-vo OmGTU, 2009.
2. Pesetskii, S.S., Bogdanovich, S.P., and Myshkin, N.K., Tribological Behavior of Nanocomposites Produced by the Dispersion of Nanofillers in Polymer Melts, Trenie Iznos, 2007, vol. 28, no. 5, pp. 500–524 [J. Friction Wear (Engl. Transl.), 2007, vol. 28, no. 5, pp. 457–475].
3. Myshkin, N.K., Petrokovets, M.I., and Kovalev, A.V., Tribology of Polymers: Adhesion, Friction, Wear, and Mass-Trasfer, Tribology Int., 2005, no. 38, pp. 910–921.10.1016/j.triboint.2005.07.016 ↗
4. Buznik, V.M., Fomin, V.M., Alkhimov, A.P., et al., Metallopolimernye nanokompozity: poluchenie, svoistva, primenenie (Metalpolymer Nanocomposites: Formation, Properties, Application), Novosibirsk: Sib. Otd. Ross. Akad. Nauk, 2005.
5. Galetz, M.C., Blar, T., Ruckdaschel, H., et al., Carbon Nanofibre-Reinforced Ultrahigh Molecular Weight Polyethylene for Tribological Applications, J. Appl. Polym. Sci., 2007, vol. 104, no. 6, pp. 4173–4181.10.1002/app.26058 ↗
6. Jiansong Zhou and Fengyuan Yan, Improvement of the Tribological Behavior of Ultra-High-Molecular-Weight Polyethylene by Incorporation of Poly (Phenyl p-Hydroxyzoate), J. Appl. Polym. Sci., 2005, no. 96, pp. 2336–2343.10.1002/app.21534 ↗
7. Ruan, S.L., Gao, P., Yang, X.G., and Yu, T.X., Toughening High Performance Ultrahigh Molecular Weight Polyethylene Using Multiwalled Carbon Nanotubes, Polymer, 2003, no. 19, pp. 5643–5654.10.1016/S0032-3861(03)00628-1 ↗
8. Zou Vaobaug, Feng Vongeheng, Wang Lu, and Liu Viaobo, Processing and Properties of MWNT/HDPE Composites, Carbon, 2004, vol. 42, no. 2, pp. 271–277.10.1016/j.carbon.2003.10.028 ↗
9. Sinha, S.R. and Briscoe, B.J., Polymer Tribology, London: Imperial College, 2009.10.1142/9781848162044 ↗
10. Shi, W., Preliminary Investigation into the Load Bearing Capacity of Ion Beam Surface Modified UHMWPE, J. Mater. Sci. Lett., 2004, no. 39, pp. 3183–3186.10.1023/B:JMSC.0000025854.49913.4a ↗
11. Cooper, J., Dowson, D., and Fisher, J., Macroscopic and Microscopic Wear Mechanisms in Ultra-High Molecular Weight Polyethylene, Wear, 1993, no. 162, pp. 378–384.10.1016/0043-1648(93)90521-M ↗
12. Prut, E.V. and Zelenetskii, A.N., Chemical Modification and Blending of Polymers in an Extruder Reactor, Uspekhi Khimii, 2001, vol. 70, no. 1, pp. 72–87 [Russ. Chem. Rev. (Engl. Transl.), 2001, vol. 70, no. 1, pp. 65–79].
13. Krasnov, A.P., Said-Galiev, E.E., Afonicheva, O.V., et al., Tribological Behavior of Blendes of Incompatible Ultra-High-Molecular-Weight Polyethylene and Polymethyl Methacrylate Synthesized in Supercritical Carbon Dioxide, Trenie Iznos, 2007, vol. 28, no. 3, pp. 288–295 [J. Friction Wear (Engl. Transl.), 2007, vol. 28, no. 3, pp. 292–299].
14. Panin, S.V., Kornienko, L.A., Vannasri, S., et al., Comparative Analysis of the Influence of Nano- and Microfillers of Oxidized Al on the Frictional-Mechanical Characteristics of UHMWPE, Trenie Iznos, 2010, vol. 31, no. 5, pp. 353–360 [J. Friction Wear (Engl. Transl.), 2010, vol. 31, no. 5, pp. 371–378].
15. Sirota, A.G., Modifikatsiya struktury i svoistv polimerov (Modification of Polymer Structure and Properties), Leningrad: Khimiya, 1974.
16. Panin, V.E., Panin, S.V., Kornienko, L.A., et al., Effect of Mechanical Activation of Ultra-High-Molecular-Weight Polyethylene on Its Mechanical and Triboengineering Properties, Trenie Iznos, 2010, vol. 31, no. 2, pp. 168–176 [J. Friction Wear (Engl. Transl.), 2010, vol. 31, no. 2, pp. 121–127].