Formation of wear-resistant nanostructured TiN/Cu coatings
Source abstract
Abstract
Results of studying the structural and physicomechanical properties of TiN/Cu coatings deposited from multicomponent separated vacuum-arc plasma are presented. Specific features of the formation of the nanostructured TiN-based coatings, which are alloyed with an element that does not form chemical compounds with titanium and nitrogen under the selected conditions of deposition, are considered. It is shown that alloying of the coating with this element leads to refinement of its structure. Regularities of variations in the microhardness and the tribological characteristics of TiN/Cu coatings of different elemental compositions are investigated. It has been found that the coatings that contain 2–4% of Cu have the highest microhardness (39–40 GPa) and the lowest coefficient of friction (0.2–0.4). Main factors responsible for the high wear resistance of the coatings are determined.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Veprek, S. and Veprek-Heijman, M., Industrial applications of superhard nanocomposite coatings, Surf. Coat. Technol., 2008, vol. 202, pp. 5063–5073.10.1016/j.surfcoat.2008.05.038 ↗
2. PalDey S. and Deevi S.C., Single layer and multilayer wear resistant coatings of (Ti,Al)N, Rev. Mater. Sci. Eng. A, 2003, vol. 342 pp. 58–79.10.1016/S0921-5093(02)00259-9 ↗
3. Latushkina, S.D., Romanov, I.M., Zhizhchenko, A.G., and Posylkina, O.I., Vacuum-arc nanocrystalline coatings on the basis of titanium nitride, Perspekt. Mater., 2014, vol. 6, pp. 49–55.
4. Han, J.G., Myung, H.S., Lee, H.M., and Shaginyan, L.R., Microstructure and mechanical properties of Ti–Ag–N and Ti–Cr–N superhard nanostructured coatings, Surf. Coat. Technol., 2003, vol. 174–175, pp. 738–743.10.1016/S0257-8972(03)00565-6 ↗
5. Tabakov, V.P., Formirovanie iznosostoikikh ionnoplazmennykh pokrytii rezhushchego instrumenta (Formation of Wear–Resistant Coatings of Cutting Tool), Moscow: Mashinostroenie, 2008.
6. Gleiter, H., Nanostructured materials: Basic concepts and microstructure, Acta Mater., 2000, vol. 48, pp. 1–29.10.1016/S1359-6454(99)00285-2 ↗
7. Latushkina, S.D., Kuis, D.V., Zhizhchenko, A.G., Posylkina, O.I., Rudak, P.V., and Komarovskaya, V.M., Vacuum plasma protective wood-cutting tool coatings, Uprochn. Tekhnol., 2014, no. 11, pp. 23–28.
8. Kragel’skii, I.V, Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Foundations of Calculations on Friction and Wear), Moscow: Mashinostroenie, 1977.
9. Vershina, A.K., Izotova, S.D., Pleskachevskii, I.Yu., et al., Structure and protective properties of coatings obtained from separated flows of low-temperature plasma, Fiz. Khim. Obrab. Mater., 1994, vol. 2, pp. 53–58.
10. Fox-Rabinovich, G.S., Weatherly, G.C., and Dodonov, A.I., Nanocrystalline filtered arc deposited (FAD) TiAlN PVD coatings for high-speed machining applications, Surf. Coat. Technol., 2004, vol. 177–178, pp. 800–805.10.1016/j.surfcoat.2003.05.004 ↗
11. Myung, H.S., Lee, H.M., Shaginyan, L.R., and Han, J.G., Microstructure and mechanical properties of Cu doped TiN superhard nanocomposite coatings, Surf. Coat. Technol., 2003, vol. 163–164, pp. 591–596.10.1016/S0257-8972(02)00627-8 ↗
12. He, J.L., Sethuhara, Y., Shimuzu, I., and Miyake, S., Structure refinement and hardness enhancement of titanium nitride films by addition of copper, Surf. Coat. Technol., 2001, vol. 137, pp. 38–42.10.1016/S0257-8972(00)01089-6 ↗