Strength characteristics, structure and wear resistance of ptfe-commercial carbon composites
Source abstract
Abstract
The present work is devoted to investigations of the structure, mechanical properties, and wear resistance of composites based on polytetrafluoroethylene filled by 0.3–20.0% of commercial carbon. The methods used were mechanical testing, X-ray phase analysis, scanning calorimetry, scanning electron microscopy, and triboengineering tests. The wear resistance of low-filled PTFE-based composites containing 1–5% of ultradispersed commercial carbon was found to increase sharply, by up to 500–600 times, whereas the main strength characteristics of these composites, including relative elongation at rupture and tensile strength, remained at levels close to that of pure polytetrafluoroethylene (PTFE). This effect is attributed to the active cross-linking role of ultradispersed carbon particles, which promote the formation of a transient supermolecular structure in the low-filled composites; this structure is a combination of the unfilled PTFE structure and a spherulite-like supermolecular structure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposite Synthesis and Irradiation · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Usuki, A., Kojima, Y., Kawasumi, M., et al., Synthesis of Nylon 6-Clay Hybrid, J. Mater. Res., 1993, no. 8, pp. 1179–1184.10.1557/JMR.1993.1179 ↗
2. Kojima, Y., Usuki, A., Kawasumi, M., et al., Mechanical Properties of Nylon 6-Clay Hybrid, J. Mater. Res., 1993, no. 8, pp. 1185–1189.10.1557/JMR.1993.1185 ↗
3. Yano, K., Usuki, A., Okada, A., Kurauchi, T., and Kamigaito, O., Synthesis and Properties of Polyimide-Clay Hybrid, J. Polym. Sci. Part A. Polym. Chem., 1993, no. 31, pp. 2493–2498.10.1002/pola.1993.080311009 ↗
4. Ruan, S. L., Gao, P., Yang, X. G., and Yu, T. X., Toughening High Performance Ultrahigh Molecular Weight Polyethylene Using Multiwalled Carbon Nanotubes, Polymer, 2003, no. 44, pp. 5643–5654.10.1016/S0032-3861(03)00628-1 ↗
5. Brandl, W., Marginean, G., Chirila, V., and Warschewski, W., Production and Characterization of Vapor-Grown Carbon Fiber/Polypropylene Composites, Carbon, 2004, no. 42, pp. 5–9.10.1016/j.carbon.2003.09.012 ↗
6. Zou Yaobang, Feng Yongcheng, Wang Lu, and Liu Xiaobo, Processing and Properties of MWNT/HDPE Composites, Carbon, 2004, no. 42, pp. 271–277.10.1016/j.carbon.2003.10.028 ↗
7. Wang, Q., Xu, J., Shen, W., and Liu, W., An Investigation of the Friction and Wear Properties of Nanometer Si3N4 filled PEEK, Wear, 1996, no. 196, pp. 82–86.10.1016/0043-1648(95)06866-X ↗
8. Wang, Q., Xu, J., and Shen, W., The Friction and Wear Properties of Nanometer SiO2 Filled Polyetheretherketone, Tribol. Int., 1997, no. 30, no. 3, pp. 193–197.10.1016/S0301-679X(96)00042-4 ↗
9. Garcia, M., de Rooij, M., Winnubst, L., van Zyl, W.E., and Verweij H., Friction and Wear Studies on Nylon-6/SiO2 Nanocomposites, J. of Applied Polymer Science, 2004, no 92, pp. 1855–1862.10.1002/app.20167 ↗
10. Vinogradov, A.V., Tsielens, U.A., and Adrianova, O.A., Ultradispersed Refractory Compounds: Structurally Active Filler of Crystalline Polymers, Mech. of Comp. Mater., 1991, no. 3, pp. 526–530.10.1007/BF00616888 ↗
11. Vinogradov, A.V. and Okhlopkova, A.A., Wear Resistance of Dispersion-Filled PTFE and Critical Concentrations of Ultradispersed Filler, J. of Friction and Wear, 1995, vol. 16, no. 5, pp. 931–937.
12. Okhlopkova, A.A., Vinogradov, A.V., and Pinchuk, L.S., Plastiki napolnennye ul’tradispersnymi neorganicheskimi soedineniyami (Plastics Filled by Ultradispersed Inorganic Compounds), Gomel: IMMS NAN Belrusi, 1999.
13. Okhlopkova, A.A., Adrianova, O.A., and Popov, S.N., Modifikatsiya Polimerov Ul’tradispersnymi Soedineniyami (Polymer Modification by Ultradispersed Compounds), Yakutsk: Yakutskii filial izdatel’stva SO RAN, 2003.
14. Okhlopkova, A.A., Properties of Polytetrafluoroethylene Modified by Ultradispersed Diamonds, Materialy, Tekhnologii, Instrumenty, 1999, vol. 4, no. 3, pp. 60–63.
15. Li Fei, Hu Ke-ao, Li Jian-lin, and Zhao Bin-yuan., The Friction and Wear Characteristics of Nanometer ZnO Filled Polytetrafluoroethylene, Wear, 2002, no. 249, pp. 877–882.10.1016/S0043-1648(01)00816-X ↗
16. Sawyer, W. G., Freudenberg, K. D., Bhimaraj, P., and Schadler, L. S. A Study on the Friction and Wear Behavior of PTFE Filled with Alumina Nanoparticles, Wear, 2003, no. 254, pp. 573–580.10.1016/S0043-1648(03)00252-7 ↗
17. Pugachev, A.K., Pererabotka ftoroplastov v izdeliya (Fluoroplastics Processing into Articles), Leningrad: Khimiya, 1987.
18. Solomko, V.P., Napolnennye kristalizuyashchiesya polimery (Filled Crystallizing Polymers), Kiev: Navukova Dumka, 1980.
19. Klinedinst, K. A., Vogel, W. M., Stonehart, P., Rheological Characterization and Thermal Degradation of PTFE. Part 2. The Interaction Between PTFE and Carbon Black, J. of Materials Science, 1976, vol. 11, no. 5, pp. 794–800.10.1007/BF00542293 ↗
20. Biswas, S. K., Vijayan, Kalyani, Friction and Wear of PTFE. A review, Wear, 1992, no. 158, pp. 193–211.10.1016/0043-1648(92)90039-B ↗