Predicting the Corrosion Wear Rate of Tubing in Oil Fields with High Mineralization of Well Media
Source abstract
Abstract
Abstract— The evaluation of the corrosion wear rate was carried out using the Norsok Standart M-506 method for oilfield production tubing in Belarus. The method is based on a model that takes into account the speed of the gas-liquid flow, its pH, the volumetric flow rate of water, oil, gas, pressure, temperature, immersion depth, pH, density and viscosity of these media, and diameter and wall thickness of tubing. A feature of the model is the consideration of the friction of the gas-liquid flow on the walls of the tubing and the resulting shear stresses near them, which allows taking into account the corrosion-mechanical component of the metal degradation process of the tubing. The characteristics of well media and operating conditions of equipment in fields are given. Empirical coefficients of the considered model for typical conditions of Belarusian oil fields have been determined and a predictive calculation of the corrosion rate of 32Mn1A tube steel strength group N80 (Q) of the API Specification 5CT has been carried out. Data on actual values of corrosion wear of tubing from more than 100 production wells have been collected. The results indicate a high convergence of calculated and actual data. The adapted Norsok Standart M-506 method of predicting corrosion wear is recommended for use at oil fields in Belarus. It is shown how the proposed approach can be extended to other oil-bearing regions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Engineering Diagnostics and Reliability · Drilling and Well Engineering · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Markin, A.N. and Nizamov, R.E., SO 2 -korroziya neftepromyslovogo oborudovaniya (SO2 Corrosion of Oil Extracting Equipment), Moscow: VNIIOENG, 2003.
2. Daminov, A.A., Corrosion damage of underground equipment of extracting boreholes on fields of the Western Siberia region, Inzh. Prakt., 2010, no. 6, pp. 26–36.
3. Myshkin, N.K. and Petrokovets, M.I., Trenie, smazka, iznos. Fizicheskie osnovy i tekhnicheskie prilozheniya tribologii (Friction, Lubrication, Wear: Physical Foundations and Engineering Applications of Tribology), Moscow: Fizmatlit, 2007.
4. Popkova, Yu.I., Kaeshko, E.A., Kuchenev, V.O., Petrikevich, P.A., Ksenzov, A.V., and Gasanov, A.F., Results of bench tests of tube steels with different chromium content of the production tubing simulating the operating conditions of producing wells of State Production Association Belorusneft, Neftyanik Poles’ya, 2022, no. 1, pp. 112–119.10.2118/208561-MS ↗
5. De Waard, C. and Milliams, D.E., Carbonic acid corrosion of steel, Corrosion, 1975, vol. 31, no. 5, pp. 177–181. https://doi.org/10.5006/0010-9312-31.5.17710.5006/0010-9312-31.5.177 ↗
6. Papavinasam, S., Corrosion Control in the Oil and Gas Industry, San Diego: Elsevier, 2014. https://doi.org/10.1016/C2011-0-04629-X10.1016/C2011-0-04629-X ↗
7. Markin, A.N., Nizamov, R.E., and Sukhoverov, S.V., Neftepromyslovaya khimiya. Prakticheskoe rukovodstvo (Oil Extracting Chemistry: Practical Guidelines), Vladivostok: Dal’nauka, 2011.
8. De Waard, C. and Lotz, U., Prediction of CO2 corrosion of carbon steel, Proc. NACE Int. Conf. Corrosion’93, 1993.10.5006/C1993-93069 ↗
9. De Waard, C., Lotz, U., and Dugstad, A., Influence of liquid flow velocity on CO2 corrosion: A semi-empirical model, Proc. NACE Int. Conf. Corrosion’95, 1995.10.5006/C1995-95128 ↗
10. Nyborg, R., Field data collection, evaluation and use for corrosivity prediction and validation of models, Mechanism of CO 2 and H 2 S Metal Loss Corrosion: 10-Year Review, Gunaltum, Y., Ed., Houston: 2006, pp. 241–255.
11. M-506. CO 2 Corrosion Rate Calculation Model, Norway: Norsok Standart, 2005.
12. API Specification 5CT Specification for Casing and Tubing, American Petroleum Institute, 2018, 10th ed.