journal article·2023-12

Determination of the Carrying Ability of Metal-Fluoroplast Slide Bearings Using the Finite Element Method

K. Yu. Zershchikov, A. S. Yelkin, I. V. Sergeichev, Yu. V. Semenov, A. V. Mashkov

Journal of Friction and Wear· Volume 44· Issue 6
Publisher page

Abstract

Abstract Based on the proposed loading model of a sliding bearing, the dependence of the load-bearing capacity of reinforced metal fluoroplastic sliding bearings on their geometric characteristics and force factors was studied using the finite element method. A calculation of stresses and deformations in the most pliable antifriction layer was carried out. It is shown that the distribution of stresses and deformations in the bearing is extremely uniform and depends on the thickness of the antifriction layer and the height of the bearing. Criteria for assessing the performance of sliding bearings under load were introduced and based on these criteria the results were compared with experimental data. The agreement between calculated and experimental data allows us to use the resulting methodology to determine the load-bearing capacity of slide bearings. The solutions make it possible to move from the experimental method of determining the load-bearing capacity of metal fluoroplastic sliding bearings to the calculated one and to design bearings with predetermined strength characteristics. This will help specialists designing bearing units improve the quality and speed of their development.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Metal Alloys Wear and Properties · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Semenov, A.P. and Savinskii, Yu.E., Metalloftoroplastovye podshipniki (Metal-Fluoroplastic Bearings), Moscow: Mashinostroenie, 1976.
2. Proizvodstvo izdelii iz polimernykh materialov (Product Manufacturing from Polymer Materials), Kryzhanovskii, V.K. , Eds., St. Petersburg: Professiya, 2004.
3. Fedorchenko, I.M. and Pugina, L.I., Kompozitsionnye, spechennye antifriktsionnye materialy (Composition, Sintered Antifriction Materials), Kiev: Naukova Dumka, 1980.
4. Bykov, A.F., Armatura s sharovym zatvorom dlya gidravlicheskikh sistem (Valves with Ball Gate for Hydraulic Systems), Moscow: Mashinostroenie, 1971.
5. Zershchikov, K.Yu. and Semenov, Yu.V., Dependence of bearing capacity of metal-polymer plane bearings on their geometric characteristics, Konstr. Kompoz. Mater., 2012, no. 1, pp. 28–31.
6. Zershchikov, K.Yu. and Kuzakhmetova, E.K., Metal-polymer bearings for revolution units of gate pipe fittings, Truboprovodnaya Armatura Oborud., 2012, no. 2, pp. 22–23.
7. Metal/polymer composite plain bearings. https:// www.schaeffler.com/remotemedien/media/_shared_media/08_media_library/01_publications/schaeffler_2/ tpi/downloads_8/tpi_211_de_en.pdf.
8. Martínez, F.J., Canales, M., Izquierdo, S., Jiménez, M.A., and Martínez, M.A., Finite element implementation and validation of wear modelling in sliding polymer–metal contacts, Wear, 2012, vols. 284–285, pp. 52–64. https://doi.org/10.1016/j.wear.2012.02.00310.1016/j.wear.2012.02.003 ↗
9. Chernets, M., Chernets, J., Kindrachuk, M., and Kornienko, A., Methodology of calculation of metal-polymer sliding bearings for contact strength, durability and wear, Tribol. Ind., 2020, vol. 42, no. 4, pp. 572–581. https://doi.org/10.24874/ti.900.06.20.1010.24874/ti.900.06.20.10 ↗
10. Dykha, A., Sorokatyi, R., Makovkin, O., and Babak, O., Calculation-experimental modeling of wear of cylindrical sliding bearings, Eastern-Eur. J. Enterpr. Technol., 2017, vol. 5, no. 1, pp. 51–59. https://doi.org/10.15587/1729-4061.2017.10963810.15587/1729-4061.2017.109638 ↗
11. Zernin, M.V., Mishin, A.V., Rybkin, N.N., Shil’ko, S.V., and Ryabchenko, T.V., Consideration of the multizone hydrodynamic friction, the misalignment of axes, and the contact compliance of a shaft and a bush of sliding bearings, J. Frict. Wear, 2017, vol. 38, no. 3, pp. 242–251. https://doi.org/10.3103/s106836661703016310.3103/s1068366617030163 ↗
12. Miler, D., Škec, S., Katana, B., and Žeželj, D., An experimental study of composite plain bearings: the influence of clearance on friction coefficient and temperature, Strojniški Vestn., 2019, vol. 65, no. 10, pp. 547–556. https://doi.org/10.5545/sv-jme.2019.610810.5545/sv-jme.2019.6108 ↗