journal article·2022-02

Implementation of Structural and Morphological Wear Resistance Principles for Improving Tribological Characteristics of Steels

S. A. Bespalov, Z. A. Duriagina, V. N. Uvarov

Journal of Friction and Wear· Volume 43· Issue 1
Publisher page

Abstract

The principles of organizing wear-resistant microstructures based on the regularities of relationship between the essence of structure formation and the geometry of tribological contact are proposed. Their implementation makes it possible to purposefully regulate the phase composition of surface layers of structural and tool steels for providing high wear resistance. It is shown by the example of 40H steel that the carbide phase morphology is one of the main factors affecting the equilibrium roughness, structural and geometric parameters, and the bearing capacity of the contact surface, which are formed during friction and affect its tribological properties. It is established that the formation of the structurally and mechanically heterogeneous microstructure of cast 08G2C steel significantly reduces its wear compared to homogeneous steel. The increase in the dendritic colonies dispersion contributes to the increase in the wear resistance of cast material. It is shown that the formation of dispersed martensite with residues of large-size high-melting alloyed carbides instead of these carbides contributes to a significant increase in the wear resistance of H6VF steel.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Coatings · Metal Alloys Wear and Properties · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Garkunov, D.N., Tribotekhnika (iznos i bezyznosnost’) (Triboengineering: Wear and Nonweariness), Moscow: Mosk. S-kh. Akad., 2001.
2. Silaev, B.M., Tribologiya detalei mashin v malovyazkikh smazochnykh sredakh ((Tribology of Machine Parts in Low-Viscosity Lubricating Media), Samara: Samar. Gos. Aerokosm. Univ., 2008.
3. Polzer, G. and Meissner, F., Grundlagen zu Reibung und Verschleiss, Leipzig: VEB Dtsch. Verlag Grundstoffind., 1979.
4. Zhukov, A.A., Sil’man, G.I., and Epshtein, L.Z., The structure of steel and cast iron, and Charpy principle, Izv. Akad. Nauk SSSR, Met., 1971, no. 2, pp. 145–152.
5. Shpagin, A.I., Antifriktsionnye splavy (Antifriction Alloys), Moscow: Metallurgizdat, 1956.
6. Petrova, L.G., Aleksandrov, V.A., Demin, P.E., and Drobkov, V.P., Formation of composite nanostructured coatings on steel parts by chemical-thermal treatment, Vestn. Khar’k. Nats. Avtomob.-Dorozhn. Univ., 2010, no. 51, pp. 7–13.
7. Baglyuk, G.A. and Poznyak, L.A., Iron-based powder wear resistant materials. 1. Materials obtained by sintering and impregnation, Poroshk. Metall., 2001, nos. 1–2, pp. 44–53.
8. GOST (State Standard) 21 318–82: Measurement of Microhardness by Scratching with Diamond Instruments, Moscow: Izd. Standartov, 1983.
9. Sviridenok, A.I., Chizhik, S.A., and Petrokovets, M.I., Mekhanika diskretnogo friktsionnogo kontakta (Mechanics of Discrete Friction Contact), Minsk: Navuka i Tekhnika, 1990.
10. Rapoport, L.S. and Rybakova, L.M., Influence of the structure of surface layers on friction and wear processes, Trenie Iznos, 1987, vol. 8, no. 6, pp. 1038–1043.
11. Demkin, N.B. and Ryzhov, E.V., Kachestvo poverkhnosti i kontakt detalei mashin (Surface Quality and Contact of Machine Parts), Moscow: Mashinostroenie, 1981.
12. Yakovleva, S.P., Makharova, S.N., Vinokurov, G.G., Mordovskoi, P.G., and Struchkov, N.F., Increase of wear resistance and relief of friction surface of ferritic-pearlitic steel nanostructured by megaplastic deformation, Fundem. Issled., Tekh. Nauki, 2013, no. 10 (15), pp. 3451–3455.
13. Volosevich, P.Yu. and Bespalov, S.A., Sclerometry and its use for the complex identification of the specific distribution of structural elements, their mechanical characteristics, and dimensional parameters, Metallofiz. Nov. Tekhnol., 2004, vol. 26, no. 3, pp. 343–359.
14. Grinberg, E.M., Alekseev, A.A., Novikova, E.Yu., Yarovitskaya, A.A., and Galkin, A.F., Influence of cooling conditions on the level of residual stresses and redistribution of carbon in austenite and martensite during hardening of medium carbon steels, Izv. Tul’sk. Gos. Univ., Tekh. Nauki, 2015, vol. 12, no. 1, pp. 104–112.
15. Shtremel’, M.A., Andreev, Yu.G., and Kozlov, D.A., Structure and strength of lath martensite, Met. Sci. Heat Treat., 1999, vol. 41, nos. 3–4, pp. 140–145.10.1007/BF02465797 ↗
16. Barabonova, I.A. and Afanas’eva, L.E., Structure and properties of gradiently hardened high-cutting steel, Vestn. Tver. Gos. Univ., Ser.: Fiz., 2015, no. 1, pp. 21–30.
17. Elagina, O.Yu., Tekhnologicheskie metody povysheniya iznosostoikosti detalei mashin (Technological Improvement of the Wear Resistance of Machine Parts), Moscow: Universitetskaya Kniga, 2009.
18. Popova, N.A., Evolution of a dislocation ensemble, internal stress fields, and phase transformations during plastic deformation of steels with different structures, Cand. Sci. (Eng.) Dissertation, Tomsk: Tomsk State Univ. Arch. Build., 2005.
19. Bespalov, S.A., Structure and wear resistance of the restored wagon wheel flange, Metalozn. Obrob. Met., 2009, no. 4, pp. 3–7.
20. Karabarin, D.A. and Tarasov, G.F., Thermal hardening of steels to improve the abrasive wear resistance, Aktual’n. Probl. Aviats. Kosm., 2013, vol. 1, no. 9, pp. 16–17.
21. Modi, O.P., Mondal, D.P., Prasad, B.K., et al., Abrasive wear behavior of a high carbon steel: effects of microstructure and experimental parameters and correlation with mechanical properties, Mater. Sci. Eng., A, 2003, vol. 343, nos. 1–2, pp. 235–242.10.1016/S0921-5093(02)00384-2 ↗
22. Bespalov, S.A. and Volosevich, P.Yu., The wear-resistant states in tool alloyed steels, Metalozn. Obrob. Met., 2006, no. 2, pp. 37–43.