Efficiency of Antifriction Solid Lubricant Coatings for Metal–Polymer Friction Pairs
Source abstract
Abstract
Abstract— Tribotechnical testing results for antifriction solid lubricant coatings in a metal–polymer friction pair are presented. The testing has been carried out according to an ASTMG99 standard with the use of a friction machine operating according to a sphere–disk pattern at sliding velocity V = 0.8 m/s, load F = 23 N, and rotation frequency n = 310 min–1. While testing, the value of sliding friction force was permanently registered, and the value of the friction coefficient was automatically calculated. Testing was carried out until preset friction path L = 2880 m accumulated. After testing a level of linear wear was measured for the spherical counterbody. Antifriction solid lubricant coatings based on molybdenum disulfide and polytetrafluoroethylene deposited onto steel samples were tested. Polyoxymethylene spheres 10 mm in diameter were used as a counterbody. The testing was performed with the use of different greases based on mineral and synthetic oils with a complex of antifriction additives. It is revealed that the use of antifriction solid lubricant coatings together with greases makes it possible to provide a 5.9 to 10.1-fold decrease in the linear wear of counterbodies, as well as a 1.5 to 2.3-fold decrease in the friction coefficient depending on the grade of the coating under application. By selecting an optimum combination of antifriction solid lubricant coatings and plastic grease one can achieve a decrease in the linear wear of the counterbodies amounting up to 14.2 times, and an approximately 4.4-fold decrease in the friction coefficient.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Panin, S.V., Buslovich, D.G., Luo, J., Kornienko, L.A., and Alexenko, V.O., Tribological characteristics of three-component solid-lubricant composites based on polyetherimide under conditions of point and linear tribocontacts, Fundam. Probl. Sovremennogo Materialoved., 2022, no. 3, pp. 402–410. https://doi.org/10.25712/ASTU.1811-1416.2022.03.01310.25712/ASTU.1811-1416.2022.03.013 ↗
2. Prozhega, M.V., Reschikov, E.O., Konstantinov, E.O., Kharkov, M.M., and Grigoriev, F.A., Tribological properties of antifriction molybdenum disulfide coatings under extreme conditions, J. Frict. Wear, 2022, vol. 43, no. 6, pp. 423–430. https://doi.org/10.3103/S106836662206012510.3103/S1068366622060125 ↗
3. Prozhega, M.V. and Konstantinov, E.O., Studies of antifriction coatings Modengy based on molybdenum disulfide under extreme operating conditions, Truboprovodnaya Armatura Oborud., 2022, vol. 2022, no. 5, pp. 62–63.
4. Scharf, T.W. and Prasad, S.V., Solid lubricants: A review, J. Mater. Sci., 2012, vol. 48, no. 2, pp. 511–531. https://doi.org/10.1007/s10853-012-7038-210.1007/s10853-012-7038-2 ↗
5. Sarkar, M. and Mandal, N., Solid lubricant materials for high temperature application: A review, Mater. Today: Proc., 2022, vol. 66, pp. 3762–3768. https://doi.org/10.1016/j.matpr.2022.06.03010.1016/j.matpr.2022.06.030 ↗
6. Vazirisereshk, M.R., Martini, A., Strubbe, D.A., and Baykara, M.Z., Solid lubrication with MoS2: A review, Lubricants, 2019, vol. 7, no. 7, p. 57. https://doi.org/10.3390/lubricants707005710.3390/lubricants7070057 ↗
7. Khopin, P.N., Complex evaluation of tribotechnical indicators of mating with hard-lubricating coatings, Doctoral (Eng.) Dissertation, Moscow, 2018.
8. Yang, J.-F., Jiang, Ya., Hardell, J., Prakash, B., and Fang, Q.-F., Influence of service temperature on tribological characteristics of self-lubricant coatings: A review, Front. Mater. Sci., 2013, vol. 7, no. 1, pp. 28–39. https://doi.org/10.1007/s11706-013-0190-z10.1007/s11706-013-0190-z ↗
9. Prudnikov, M.I., Antifriction hard-lubricating coatings Modengy: From idea to realization in practice, Glavnyi Mekhanik, 2018, nos. 1–2, pp. 56–60.
10. Jia, Yu., Liu, Zh., Wang, X., Yang, J., and Shi, R., Synthesis of microspheric molybdenum disulfide and its improvement on tribological properties of bismaleimides, J. Inorg. Organomet. Polym. Mater., 2020, vol. 30, no. 10, pp. 3933–3939. https://doi.org/10.1007/s10904-020-01533-610.1007/s10904-020-01533-6 ↗
11. Liu, C., Chen, L., Zhou, J., Zhou, H., and Chen, J., Tribological properties of adaptive phosphate composite coatings with addition of silver and molybdenum disulfide, Appl. Surf. Sci., 2014, vol. 300, pp. 111–116. https://doi.org/10.1016/j.apsusc.2014.02.01510.1016/j.apsusc.2014.02.015 ↗
12. Gavrilov, K.V., Morozov, A.V., Seleznev, M.V., Rozhdestvenskii, Yu.V., Khozeniuk, N.A., Doikin, A.A., and Hudyakov, V.S., Evaluation of anti-friction properties of solid lubricant coatings for a piston skirt of a high-force diesel, J. Frict. Wear, 2020, vol. 41, no. 5, pp. 480–485. https://doi.org/10.3103/S106836662005010410.3103/S1068366620050104 ↗