Tribological Phenomena during Contact Interactions in Nanostructured Coatings
Source abstract
Abstract
Abstract— It is shown that during the contact interactions the ratio of hardness to the modulus of elasticity plays a key role in the surface engineering; this is called the dimensionless transition criterion of the contact mode to determine the performance of the coating. The variety of this relationship also serves as a criterion of the “elastic stress–failure” transition and allows one to describe important tribological applications (parameter optimization) of the near-surface properties of a material caused by thermo-mechanical contact pressure. This article provides a general diagram of the tribological phenomena observed during contact interactions and the resulting changes in the parameters of coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Janahmadov, A.Kh. and Javadov, M.Y., Synergetics and Fractals in Tribology, Berlin: Springer-Verlag, 2016.10.1007/978-3-319-28189-6 ↗
2. Fundamentals of Friction: Macroscopic and Microscopic Processes, Singer, I.L. and Pollock, H.M., Eds., Dordrecht: Kluwer, 1992.
3. Sarid, D., Scanning Force Microscopy, New York: Oxford Univ. Press, 1991.
4. Persson, B.N.J., Sliding Friction: Physical Principles and Applications, Berlin: Springer-Verlag, 1998.10.1007/978-3-662-03646-4 ↗
5. Solntsev, Yu.P., Pryakhin, E.I., Vologzhanina, S.A., and Petkova, A.P., Nanotekhnologii i spetsial’nye materially. Uchebnoe posobie dlya vuzov (Nanotechnologies and Special Materials: Manual for Higher Education Institutions), St. Petersburg: Khimizdat, 2009.
6. Dedkov, G.V., Nanotribology: experimental facts and theoretical models, Phys.-Usp., 2000, vol. 43, no. 6, pp. 541–572.10.1070/PU2000v043n06ABEH000650 ↗
7. Ivanov, L.A. and Muminova, S.R., Nanotechnologies and nanomaterials: review of inventions, Part 1, Nanotehnol.Stroit., 2017, vol. 9, no. 1, pp. 88–106. https://doi.org/10.15828/2075-8545-2017-9-1-88-10610.15828/2075-8545-2017-9-1-88-106 ↗
8. Chichinadze, A.V., Braun, E.L., Bushe, N.A., et al., Osnovy tribologii (Fundamentals of Tribology), Moscow: Mashinostroenie, 2001.
9. Pashaev, A.M. and Janahmadov, A.Kh., Fraktal’nye podkhody v mekhanike razrusheniya (Fractal Approaches in Mechanics of Destruction), Baku: Apostrof, 2015.
10. Holmberg, K. and Matthews, A., Coatings tribology: a concept, critical aspects and future directions, Thin Solid Films, 1994, vol. 253, pp. 173–178.10.1016/0040-6090(94)90315-8 ↗
11. Holmberg, K., Matthews, A., and Ronkainen, H., Coatings tribology—contact mechanisms and surface design, Tribol. Int., 1998, vol. 31, p. 107120.10.1016/S0301-679X(98)00013-9 ↗
12. Matthews, A., Leyland, A., Holmberg, K., and Ronkainen, H., Design aspects for advanced tribological surface coatings, Surf. Coat. Technol., 1998, vols. 100–102, pp. 1–6.10.1016/S0257-8972(97)00578-1 ↗
13. Leyland, A. and Matthews, A., Optimization of nanostructured tribological coatings, in Nanostructured Coatings, Cavaleiro, A. and De Hosson, J.Th.M., Eds., New York: Springer-Verlag, 2006, pp. 511–538.
14. Pashaev, A.M. and Janahmadov, A.Kh., Mezomekhanika i fizika plastichnosti (Mesomechanics and Physics of Plasticity), Baku: Apostrof, 2017.
15. Janahmadov, A.Kh., Heat failure of friction pairs (brakes) operating in repeated—short regime, Frict.Wear, 1996, vol. 17, no. 4, pp. 470–474.
16. Godet, M., Berthier, Y., Vincent, L., and Flamand, L., Hard coatings for tribological applications: a pluridisciplinary approach, Surf. Coat. Technol., 1991, vol. 45, pp. 1–8.10.1016/0257-8972(91)90199-7 ↗
17. Ramalingam, S. and Zheng, L., Film-substrate interface stresses and their role in the tribological performance of surface coatings, Tribol. Int., 1995, vol. 28, no. 3, pp. 145–161.10.1016/0301-679X(95)98963-E ↗
18. Janahmadov, A.Kh., Javadov, M.Y., and Dyshin, O.A., Diagnosis of the contact interaction of solid bodies at friction using fractal analysis methods, J. Sci. Appl. Eng. Q., 2014, vol. 4, pp. 5–16.
19. Ramalingam, S. and Zheng, L.S., Multi-layer and composite structures for advanced coatings, Surf. Coat. Technol., 1996, vol. 81, pp. 52–71.10.1016/0257-8972(95)02618-5 ↗
20. Dzhanakhmedov, A.Kh. and Dyshin, O.A., Synergetics and fractal dimensions in tribology, J. Frict. Wear, 2011, vol. 32, no. 1, pp. 80–95.10.3103/S106836661101003X ↗
21. Lawn, B.R., Evans, A.G., and Marshall, D.B., Elastic/plastic indentation damage in ceramics the lateral crack system, J. Am. Ceram. Soc., 1980, vol. 63, pp. 574–581.10.1111/j.1151-2916.1980.tb10768.x ↗
22. Tsui, T.Y. and Pharr, G.M., Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates, J. Mater. Res., 1999, vol. 14, no. 1, pp. 292–301.10.1557/JMR.1999.0042 ↗
23. Pharr, G.M., Measurement of mechanical properties by ultra-low load indentation, Mater. Sci. Eng., A, 1998, vol. 253, nos. 1–2, pp. 151–159.10.1016/S0921-5093(98)00724-2 ↗
24. Vepřek, S., New development in superhard coatings: the superhard nanocrystalline-amorphous composites, Thin Solid Films, 1998, vol. 317, pp. 449–454.10.1016/S0040-6090(97)00665-2 ↗