journal article·2024-10

Study of Tribological and Mechanical Characteristics of Wear-Resistant Coatings Taking into Account Their Elastoplastic Properties

O. A. Belyak, T. V. Suvorova, D. S. Manturov

Journal of Friction and Wear· Volume 45· Issue 5
Publisher page

Abstract

Abstract The influence of the elastic-plastic properties of the coating-substrate system on the mechanical and tribological properties of coatings is investigated in the present work. The mechanical and tribological properties of the coatings were obtained by tribological testing and indentation. A screening experiment for vacuum ion plasma coatings of nitride systems of TiAlN and CrAlSiN deposited on steel substrates (38X2MYA, 12X2H4A) was performed. The mechanical properties of the coatings were determined using the NanoTest 600 continuous indentation method. The microstructure of the coatings and their surface topography were studied using a high-resolution ZEISS CrossBeam 340 scanning electron microscope (SEM). Tribological tests of the nitride coatings were performed on a TRB friction machine (Anton Paar Tritec) according to the methods of DIN 50 324 and ASTM G99. In addition, the indentation process of nitride coatings was studied based on the solution of the quasi-static contact problem when introducing a rigid indenter into an elastoplastic two-layer half-space. The mechanical characteristics H/E and H3/E2 of the considered coatings and the conditions of adhesion failure between the layers have been determined. Theoretical studies are compared with the results of laboratory experiments. It is shown that when setting up laboratory experiments on indentation and tribological tests of coatings it is necessary to control not only the permissible depth of penetration of the indenter, but also the ratios of elastic-plastic properties of the coating and the substrate. It has been found that the service life of tribo-conjugate elements with coatings of a certain thickness can be increased by combining the elastic-plastic properties of the layered medium adapted to the given loading modes. This will prevent the localization of tensile and compressive stresses and delamination and cracking at the interface of two materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Tribology and Wear Analysis · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Kolesnikov, V.I., Pashkov, D.M., Belyak, O.A., Guda, A.A., Danilchenko, S.A., Manturov, D.S., Novikov, E.S., Kudryakov, O.V., Guda, S.A., Soldatov, A.V., and Kolesnikov, I.V., Design of double layer protective coatings: Finite element modeling and machine learning approximations, Acta Astronaut., 2023, vol. 204, pp. 869–877. https://doi.org/10.1016/j.actaastro.2022.11.00710.1016/j.actaastro.2022.11.007 ↗
2. Manturov, D.S., Kolesnikov, I.V., Kudryakov, O.V., Kolesnikov, V.I., Ivanochkin, P.G., and Danilchenko, S.A., Effect of basic processing factors for obtaining TiN vacuum ion-plasma coatings on their mechanical and tribological characteristics, J. Frict. Wear, 2023, vol. 44, no. 4, pp. 204–213. https://doi.org/10.3103/s106836662304006210.3103/s1068366623040062 ↗
3. Kolesnikov, V.I., Kudryakov, O.V., Zabiyaka, I.Yu., Novikov, E.S., and Manturov, D.S., Structural aspects of wear resistance of coatings deposited by physical vapor deposition, Phys. Mesomech., 2020, vol. 23, no. 6, pp. 570–583. https://doi.org/10.1134/s102995992006013210.1134/s1029959920060132 ↗
4. Levashov, E.A., Shtanskii, D.V., Kiryukhantsev-Korneev, F.V., Petrzhik, M.I., Tyurina, M.Ya., and Sheveiko, A.N., Multifunctional nanostructured coatings: Preparation, structure and ensuring uniformity of measurements of mechanical and tribological properties, Deform. Razrushenie Mater., 2009, no. 11, pp. 19–36.
5. Torskaya, E.V., Modeli friktsionnogo vzaimodeistviya tel s pokrytiyami (Models of Frictional Interaction of Bodies with Coatings), Moscow: Institut Komp’yuternykh Issledovanii, 2020.
6. Shugurov, A.R., Kuz’minov, E.D., and Panin, S.V., Using methods of analysis of optical images of friction surfaces of Ti–Al–N based coatings for assessing accumulation of damage and diagnostics of failure in tribological tests, Russ. J. Nondestr. Test., 2020, vol. 56, no. 8, pp. 635–646. https://doi.org/10.1134/s106183092008010010.1134/s1061830920080100 ↗
7. Leyland, A. and Matthews, A., On the significance of the H/E ratio in wear control: A nanocomposite coating approach to optimised tribological behaviour, Wear, 2000, vol. 246, nos. 1–2, pp. 1–11. https://doi.org/10.1016/s0043-1648(00)00488-910.1016/s0043-1648(00)00488-9 ↗
8. Kavaliova, I.N., Grigoriev, A.Ya., Gubenko, M.M., and Stolyarova, O.O., Mechanisms of friction of bicomponent coatings of thermodynamically incompatible metals produced using vapor condensation on cryogenic surfaces, J. Frict. Wear, 2016, vol. 37, no. 3, pp. 297–300. https://doi.org/10.3103/S106836661603009010.3103/S1068366616030090 ↗
9. Liskiewicz, T., Fouvry, S., and Wendler, B., Hard coatings durability under fretting wear, Life Cycle Tribology, Dowson, D., Priest, M., Dalmaz, G., and Lubrecht, A.A., Eds., Tribology and Interface Engineering Series, vol. 48, 2005, pp. 657–665. https://doi.org/10.1016/S0167-8922(05)80067-710.1016/S0167-8922(05)80067-7 ↗
10. Chen, X., Du, Ya., and Chung, Y.-W., Commentary on using H/E and H/E as proxies for fracture toughness of hard coatings, Thin Solid Films, 2019, vol. 688, p. 137265. https://doi.org/10.1016/j.tsf.2019.04.04010.1016/j.tsf.2019.04.040 ↗
11. Musil, J. and Jirout, M., Toughness of hard nanostructured ceramic thin films, Surf. Coat. Technol., 2007, vol. 201, nos. 9–11, pp. 5148–5152. https://doi.org/10.1016/j.surfcoat.2006.07.02010.1016/j.surfcoat.2006.07.020 ↗
12. Łępicka, M., Grądzka-Dahlke, M., Pieniak, D., Pasierbiewicz, K., Kryńska, K., and Niewczas, A., Tribological performance of titanium nitride coatings: A comparative study on TiN-coated stainless steel and titanium alloy, Wear, 2019, vols. 422–423, pp. 68–80. https://doi.org/10.1016/j.wear.2019.01.02910.1016/j.wear.2019.01.029 ↗
13. Sneddon, I.N., The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile, Int. J. Eng. Sci., 1965, vol. 3, no. 1, pp. 47–57. https://doi.org/10.1016/0020-7225(65)90019-410.1016/0020-7225(65)90019-4 ↗
14. Thurn, J. and Cook, R.F., Simplified Area function for sharp indenter tips in depth-sensing indentation, J. Mater. Res., 2002, vol. 17, no. 5, pp. 1143–1146. https://doi.org/10.1557/jmr.2002.016910.1557/jmr.2002.0169 ↗
15. Tabor, D., The Hardness of Metals, Oxford: Clarendon, 1951.