On the experimental techniques for assessing the specific friction force and its parameters
Source abstract
Abstract
The experimental techniques and conditions for assessing the specific friction force and its parameters are reviewed. The values of the specific friction force and its parameters obtained by various techniques in various ranges of the normal contact pressure are compared. The reasons behind the disagreement of the specific friction force values obtained by various techniques, as well as the conditions of their agreement, are analyzed. It is recommended that the values of the parameters of the specific friction force should be assessed under the conditions of a plastic deformation at high contact pressures not less than a half of the hardness of the softer material of the frictional pair. In the range of low contact pressures, the parameters of the specific friction force should be assessed considering the micro- and nanoroughness and the adhesive interaction between the surfaces.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Lubrication Engineering · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Markov, D.P., Development of ideas on friction mechanisms, J. Frict. Wear, 2013, vol. 34, no. 1, pp. 70–82.10.3103/S1068366613010108 ↗
2. Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Foundations of Calculations on Friction and Wear), Moscow: Mashinostroenie, 1977.
3. Williams, J.E. and McCarthy, D.F., A friction-measuring test for use under conditions of high normal interfacial force, Wear, 1980, vol. 58, no. 2, pp. 381–38510.1016/0043-1648(80)90165-9 ↗
4. Bridgman, P.W., Studies in Large Plastic Flow and Fracture: With Special Emphasis on the Effects of Hydrostatic Pressure, New York: McGraw-Hill, 1952.
5. Levanov, A.N., Tests for contact friction in metal pressure forming, Kuznechno-Shtampovochnoe Proizvod.–Obrab. Mater. Davleniem, 2013, no. 2, pp. 43–47.
6. Segal, V.M., Gladushin, V.V., and Semenov, A.G., Analysis of contact friction by the conical and inclined strikers, Kuznechno-Shtampovochnoe Proizvod., 1990, no. 3, pp. 5–7.
7. Izmailov, V.V., Gusev, A.F., Nesterova, I.N., and Ivanova, A.A., RF Patent 2150688, Byull. Izobret., 2000, no. 16.
8. Grigoriev, A.Y., Gutsev, D.M., Zozulya, A.P., Kovaliova, I.N., Kudritskii, V.G., Myshkin, N.K., and Semenyuk, M.S., Reciprocating MTU-2K7 millitribometer, J. Frict. Wear, 2014, vol. 35, no. 6, pp. 455–459.10.3103/S1068366614060063 ↗
9. Izmailov, V.V. and Novoselova, M.V., Contact interaction at a microscale level under static friction conditions, J. Frict. Wear, 2015, vol. 36, no. 6, pp. 487–495.10.3103/S1068366615060069 ↗
10. Musokhranov, M.V., Antonyuk, F.I., and Kalmykov, V.V., Determination of the surface energy through the function of the electron, Sovrem. Probl. Nauki Obraz., 2014, no. 6. http://www.science-education.ru/ru/article/view?id=16036.
11. Mamonova, M.V., Prudnikov, V.V., and Prudnikov, I.A., Fizika poverkhnosti. Teoreticheskie modeli i ekperimental’nye metody (Surface Physics: Theoretical Models and Experiments), Moscow: Fizmatlit, 2011.