journal article·2008-04

Analytical technique for predicting the value of micropolar lubrication criteria providing stable operation of a radial slide bearing

K. S. Akhverdiev, A. Yu. Vovk, M. A. Mukutadze, M. A. Savenkova

Journal of Friction and Wear· Volume 29· Issue 2
Publisher page

Abstract

An analytical technique is proposed for forecasting the values of the dimensionless micropolar lubricant criteria providing a stable operation mode of a radial bearing. On the basis of the analytical relations obtained for the dimensionless supporting force and the dimensionless friction torque, the optimal intervals for variation in the dimensionless micropolar lubricant criteria are determined; additionally, the values for the efficient viscosity and the volumetric concentration of the disperse phase are found. The problem of the wedge motion inside the bearing is solved; the bearing is shown to operate more stably when working on the micropolar lubricant than on the Newtonian one.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Lubrication Engineering · Advanced machining processes and optimization · Gear and Bearing Dynamics Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Spravochnik po Tribotekhnike. Tom 2. Smazochnye Materially, Tekhnika Smazki, Opory Skol’zheniya i Kacheniya (The Tribotechnics Handbook. Vol. 2. Lubricants, Lubricant Technology, Sliding and Rolling Supports). Khebda, M., and Chichinadze, A.V., Eds., Moscow: Mashinostroenie, 1990.
2. Voyutskii, S.S. Kurs Kolloidnoii Khimii (The Colloid Chemistry Course). Moscow: Khimiya, 1976.
3. Treiger, M.I. Ekonomnoe i ratsional’noe ispol’zovanie smazochnykh materialov (Frugal and Efficient Use of Lubricants). Leningrad: LDNTN, 1982.
4. Prakash, S. Theory of squeezing of the micropolar fluid films. Problemy Treniya i Smazki, 1976, no. 1, pp. 147–154.
5. Migun, N.P., and Prokhorenko, P.P. Gidrodinamika i Teploobmen Gradientnykh Techenii Mikrostrukturnoii Zhidkosti (Hydrodynamics and Heat Exchange in the Gradient Flows of Microstructure Fluid), Minsk, Nauka i Tekhnika, 1984.
6. Allen, S.J., and Kline, K. A. Lubrication theory for micropolar fluids. Trans. ASME, 1972, vol. E38, no. 4, pp. 646–656.
7. Akhverdiev, K.S., Kotel’nitskaya, L.I., and Demidova, N.N. Calculation of the thrust bearings with efficient operation on a lubricant with a melt in the turbulent operating mode. Vestnik RGYPS (Proc. Rostov State University for Communications), Rostov, 2002, no. 2, pp. 5–10.
8. Gear, C.W. Numerical initial value problems in ordinary differential equations. Prentice-Hall, Inc., 1972.
9. Konry, K. On the pored radial bearing stability. Konstruirovanie i Tekhnologiya Mashinostroeniya, 1974, no. 2, p. 206.
10. Kutepov, A.M., Polyanin, A.D., Zapretov, Z.D., Vyazmin, A.V., and Kadenin, D.A. Khimicheskaya gidrodinamika. Spravochnoe posobie (Chemical Hydrodynamics. Handbook). Moscow: Byuro Kvantum, 1996.
11. Happel, J., and Brenner, H. Low Reynolds Number Hydrodynamics. Martinus Nijhoff Publisher, Dordrecht, 1986.
12. Busevich, Yu.A., and Schelchkova, I.N. Rheological properties of the uniform fine-disperse suspensions. Stationary flows. Inzhenerno-Fizicheskii Zh., 1977, vol. 33, no. 5, pp. 872–879.
13. Kondrakov, L.A., Nikitin, G.A., Prokofiev, V.N., Skritskii, V.L., and Sosonkin, V.L. Mashinostroitel’nyi Gidroprivod (Engineering Hydraulic Drive). Prokofiev, V.N., Ed., Moscow: Mashinostroenie, 1978.