Calculation and Analytical Prediction of Coating Wear during Tribological Tests Based on Models of Contact Fatigue Failure
Source abstract
Abstract
Abstract The work examines the conditions of tribological tests of steel samples with nitride ion-plasma coatings. A calculation and analytical model is proposed for quantitative assessment of contact and wear parameters during sliding friction tests: the size of the contact area, the depth of contact approach, the depth of the plastic zone, stresses in the coating, fatigue limit, and the critical thickness of the coating, which excludes its deflection. It has been shown that coatings with a thickness above critical realize their potential for physical, mechanical, and tribological properties regardless of the substrate. If the coating thickness is insufficient, the result of tribological tests is determined by the behavior of the “coating–substrate” system, a high-hard nitride coating on a ductile steel substrate experiences deflection and premature brittle failure. To assess the wear of coatings in this case, it is recommended to use fatigue failure models with construction of the Wöhler fatigue curve and determination of the fatigue limit based on the Murakami–Endo theory. The implementation of the recommended approach was carried out for the studied nitride coatings using a database of our own experimental data.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Myshkin, N.K. and Petrokovets, M.I., Trenie, smazka, iznos. Fizicheskie osnovy i tekhnicheskie prilozheniya tribologii (Friction, Lubrication, Wear: Physical Foundations and Engineering Applications of Tribology), Moscow: Fizmatlit, 2007.
2. Kudryakov, O.V., Kolesnikov, V.I., Manturov, D.S., Kolesnikov, I.V., and Varavka, V.N., Engineering relationships for computational and analytical prediction of coating wear during tribological tests, J. Frict. Wear, 2024, vol. 45, no. 2, pp. 115–122.https://doi.org/10.3103/S106836662470018110.3103/S1068366624700181 ↗
3. Kolesnikov, V.I., Novikov, E.S., Kudryakov, O.V., and Varavka, V.N., The degradation mechanisms in ion-plasma nanostructured coatings under the conditions of contact cyclic loads, J. Phys.: Conf. Ser., 1281, vol. 1281, no. 1, p. 012036. https://doi.org/10.1088/1742-6596/1281/1/01203610.1088/1742-6596/1281/1/012036 ↗
4. Kudryakov, O.V., Varavka, V.N., Zabiyaka, I.Yu., Sidashov, A.V., and Novikov, E.S., Synthesis, electronic structure, microstructure, and properties of vacuum ion-plasma coatings based on carbon, Physics and Mechanics of New Materials and Their Applications. PHENMA 2021, Parinov, I.A., Chang, S.H., Kim, Y.H., and Noda, N.A., Eds., Springer Proceedings in Materials, vol. 10, Cham: Springer, 2021, pp. 197–206. https://doi.org/10.1007/978-3-030-76481-4_1710.1007/978-3-030-76481-4_17 ↗
5. Kolesnikov, V.I., Kudryakov, O.V., Varavka, V.N., Sidashov, A.V., Kolesnikov, I.V., Manturov, D.S., and Voropaev, A.I., Structural-phase state and properties of Cr–Al–Si–N coatings obtained by vacuum arc plasma deposition, Phys. Mesomech., 2023, vol. 26, no. 2, pp. 126–136. https://doi.org/10.1134/S102995992302002910.1134/S1029959923020029 ↗
6. Kolesnikov, Yu.V. and Morozov, E.M., Mekhanika kontaktnogo razrusheniya (Mechanics of Contact Fracture), Moscow: LKI, 2007.
7. Tushinskii, L.I., Plokhov, A.V., Tokarev, A.O., and Sindeev, V.I., Metody issledovaniya materialov. Struktura, svoistva i protsessy naneseniya neorganicheskikh pokrytii (Materials Research Methods: Structure, Properties, and Processes of Inorganic Coatings), Moscow: Mir, 2004.
8. Golovin, Yu.I., Nanoindentation and mechanical properties of solids in submicrovolumes, thin near-surface layers, and films: A Review, Phys. Solid State, 2008, vol. 50, no. 12, pp. 2205–2236. https://doi.org/10.1134/S106378340812001910.1134/S1063783408120019 ↗
9. Nanostructured Coatings, Cavaleiro, A. and de Hosson, J.Th.M., Eds., Nanostructure Science and Technology, New York: Springer, 2006. https://doi.org/10.1007/978-0-387-48756-410.1007/978-0-387-48756-4 ↗
10. Botvina, L.R., Razrushenie: kinetika, mekhanizmy, obshchie zakonomernosti (Destruction: Kinetics, Mechanisms, and General Regularities), Moscow: Nauka, 2008.
11. Ashby, M. and Jones, D., Engineering Materials, Oxford: Butterworth-Heinemann, 2006.
12. Yukitaka, M. and Masahiro, E., Quantitative evaluation of fatigue strength of metals containing various small defects or cracks, Eng. Fract. Mech., 1983, vol. 17, no. 1, pp. 1–15. https://doi.org/10.1016/0013-7944(83)90018-810.1016/0013-7944(83)90018-8 ↗
13. Murakami, Y. and Endo, M., Effects of defects, inclusions and inhomogeneities on fatigue strength, Int. J. Fatigue, 1994, vol. 16, no. 3, pp. 163–182. https://doi.org/10.1016/0142-1123(94)90001-910.1016/0142-1123(94)90001-9 ↗
14. Murakami, Y., Metal Fatigue: The Effects of Small Defects and Nonmetallic Inclusions, Oxford: Elsevier, 2002.
15. Åman, M., Tanaka, Yu., Murakami, Yu., Remes, H., and Marquis, G., Fatigue strength evaluation of small defect at stress concentration, Procedia Struct. Integr., 2017, vol. 7, pp. 351–358. https://doi.org/10.1016/j.prostr.2017.11.09910.1016/j.prostr.2017.11.099 ↗
16. Zolotorevskii, V.S., Mekhanicheskie svoistva metallov (Mechanical Properties of Metals), Moscow: Mosk. Inst. Stali i Splavov, 1998.