journal article·2024-02

Increasing the Wear Resistance of Machine Parts Made of Aluminum Alloys by Ion Nitriding with High-Energy Activation

N. K. Krioni, A. A. Mingazheva, A. D. Mingazhev

Journal of Friction and Wear· Volume 45· Issue 1
Publisher page

Abstract

Abstract The results of studies on the wear resistance of machine parts made of aluminum alloys with insulated layers obtained by activating surface layers (SLs) are considered. It is shown that, in relation to aluminum alloys, traditional ion nitriding technologies are ineffective due to the low rate of nitrogen diffusion and the heterogeneous structure of the nitrided layer (NL). The results of a fourfold increase in the intensity of diffusion processes of ion nitriding during activation of the surface layer of an aluminum alloy by methods of surface plastic deformation and high-energy ion implantation compared with traditional ion nitriding are presented. It is shown that when preparing the surface of an aluminum alloy by the method of high-energy ion implantation, the wear resistance of the nitrided layer is provided, exceeding by more than three times the wear resistance of the nitrided layer obtained during surface preparation by the method of surface plastic deformation. A new ion nitriding technology has been proposed, which makes it possible to increase the productivity of the nitriding process and the wear resistance of the AC by eliminating the oxide film by ion etching in vacuum. It is shown that the use of the method of high-energy ion implantation at an ion energy of about 25 keV ensures, due to the occurrence of a long-range effect, the formation of aluminum alloy parts in the surface layer at a depth commensurate with the thickness of the nitrided layer of radiation defects of the crystal structure, which significantly intensify nitrogen diffusion, as well as block grain boundaries inhibiting diffusion processes in them.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Kragelsky, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Fundamentals of Calculations for Friction and Wear), Moscow: Mashinostroenie, 1977.
2. Yao, L., Sasaki, G., and Fukunaga, H., Reactivity of aluminum borate whisker reinforced aluminum alloys, Mater. Sci. Eng., A, 1997, vol. 225, nos. 1–2, pp. 59–68. https://doi.org/10.1016/s0921-5093(96)10871-610.1016/s0921-5093(96)10871-6 ↗
3. Bogryakova, E.V. and Fedorova, E.A., Comparative analysis of oxide coatings on D16 alloys during microarc and electrochemical oxidation, Izvestia Vyssh. Uchebn. Zaved., Ser. Khim. Khim. Tekhnol., 2007, vol. 50, no. 11, pp. 120–121.
4. Wang, Yu. and Tung, S.C., Scuffing and wear behavior of aluminum piston skirt coatings against aluminum cylinder bore, Wear, 1999, vols. 225–229, pp. 1100–1108. https://doi.org/10.1016/s0043-1648(99)00044-710.1016/s0043-1648(99)00044-7 ↗
5. Metel, A.S., Grigoriev, S.N., Melnik, Yu.A., and Panin, V.V., Filling the vacuum chamber of a technological system with homogeneous plasma using a stationary glow discharge, Plasma Phys. Rep., 2009, vol. 35, no. 12, pp. 1058–1067. https://doi.org/10.1134/s1063780x0912009510.1134/s1063780x09120095 ↗
6. Panajoti, T.A., Creation of gaseous medium with ultimate saturating power under ion nitriding of the alloys, Fiz. Khim. Obrab. Mater., 2003, no. 4, pp. 70–78.
7. Elektronno-ionno-plazmennaya modifikatsiya tsvetnykh metallov i splavov (Electron-Ion-Plasma Modification of Nonferrous Metals and Alloys), Koval’, N.N. and Ivanov, Yu.F., Eds., Tomsk: Izd-vo NTL, 2016.
8. Process for ion nitriding of aluminium or an aluminium alloy and apparatus therefor, US Patent 4522660, 1985.
9. Suryanarayana, C., Mechanical alloying and milling, Prog. Mater. Sci., 2001, vol. 46, nos. 1–2, pp. 1–184. https://doi.org/10.1016/s0079-6425(99)00010-910.1016/s0079-6425(99)00010-9 ↗
10. Ferrasse, S., Hartwig, K.T., Goforth, R.E., and Segal, V.M., Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion, Metall. Mater. Trans. A, 1997, vol. 28, pp. 1047–1057. https://doi.org/10.1007/s11661-997-0234-z10.1007/s11661-997-0234-z ↗
11. Visuttipitukul, P., Aizawa, T., and Kuwahara, H., Advanced plasma nitriding for aluminum and aluminum alloys, Mater. Trans., 2003, vol. 44, no. 12, pp. 2695–2700. https://doi.org/10.2320/matertrans.44.269510.2320/matertrans.44.2695 ↗
12. Gerasimov, S.A., Kuksenova, L.I., and Lapteva, V.G., Struktura i iznosostoikost’ azotirovannykh konstruktsionnykh stalei i splavov (Structure and Wear Resistance of Nitrided Structural Steels and Alloys), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014, 2nd ed.
13. Geguzin, Ya.E., Diffuzionnaya zona (Diffusion Zone), Moscow: Nauka, 1979.
14. Krioni, N.K., Mingazheva, A.A., and Mingazhev, A.D., Improvement of wear resistance of a nitrided layer of machine parts made of alloyed steels by high intensity and high energy methods, J. Frict. Wear, 2022, vol. 43, no. 6, pp. 398–403. https://doi.org/10.3103/s106836662206008310.3103/s1068366622060083 ↗
15. Bokshtein, S.Z., Diffuziya i struktura metallov (Diffusion and Structure of Metals), Moscow: Metallurgiya, 1973.