Computer-Aided Design of the Composition of Extrudable Polymer–Polymer UHMWPE Composites with Specified Antifriction and Mechanical Properties
Source abstract
Abstract
An algorithm for computer design (calculated determination of the composition) of a multicomponent antifriction material is proposed. First, the minimum initial set of composite characteristics is determined experimentally for a number of controlling parameters from tribological and mechanical tests. The subsequent computer-aided design of the material in the form of constructing the corresponding response surfaces in the space of states makes it possible to identify the range of variation of the controlling parameters to provide the specified operational and technological characteristics. This approach is illustrated by the computer-aided design of the material composition (feedstock) in the form of an extrudable polymer composite based on ultra-high molecular weight polyethylene (UHMWPE) for applications in additive technologies. An optimal formulation is proposed for the UHMWPE + n wt % HDPE-g-SMA + n wt % PP ternary mixture that has tribological and mechanical properties at the level of unfilled UHMWPE and, at the same time, the melt flow index required for 3D printing by the fused deposition modeling method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties · Advanced Theoretical and Applied Studies in Material Sciences and Geometry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Borges, R.A., Choudhury, D., and Zou, M., 3D printed PCU/UHMWPE polymeric blend for artificial knee meniscus, Tribol. Int., 2018, vol. 122, pp. 1–7.10.1016/j.triboint.2018.01.065 ↗
2. Panin, S.V., Kornienko, L.A., Alexenko, V.O., Buslovich, D.G., and Dontsov, Yu.V., Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene, AIP Conf. Proc., 2017, vol. 1915, art. ID 020005.10.1063/1.5017317 ↗
3. Panin, S.V., Kornienko, L.A., Alexenko, V.O., Ivanova, L.R., Shil’ko, S.V., and Pleskachevsky, Yu.M., Extrudable composites based on UHMWPE: prospects of application in additive technologies, Nanosci. Technol., 2017, vol. 8, no. 2, pp. 85–94.
4. Ramli, M.S., Wahab, M.S., Ahmad, M., and Bala, A.S., FDM preparation of bio-compatible UHMWPE polymer for artificial implant, ARPN J. Eng. Appl. Sci., 2016, vol. 11, no. 8, pp. 5473–5480.
5. Mohamad Helmi Bin Md Ansari and Mohd Halim Irwan Bin Ibrahim, Thermal characteristic of waste- derived hydroxyapatite (HA) reinforced ultra high molecular weight polyethylene (UHMWPE) composites for fused deposition modeling (FDM) process, IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 165, art. ID 012014.10.1088/1757-899X/165/1/012014 ↗
6. Panin, S.V., Buslovich, D.G., Kornienko, L.A., Alexenko, V.O., Dontsov, Yu.V., and Shil’ko, S.V., Structure, as well as the tribological and mechanical properties, of extrudable polymer-polymeric UHMWPE composites for 3D printing, J. Frict. Wear, 2019, vol. 40, no. 2, pp. 107–115.10.3103/S1068366619020090 ↗
7. Arzamastseva, S.V., Effective use of mathematical modeling to solve the optimization problems of composite materials, Plast. Massy, 2011, no. 56, pp. 36–40.
8. Bahadur R., Characterization, modeling, and optimization of polymer composite pin fins, PhD Thesis, College Park, MD: Univ. of Maryland, 2011.
9. Gaidadin, A.N., Efremova, S.A., and Nistratov, A.V., Metody optimizatsii v tekhnologicheskoi praktike (Optimization Methods in Technological Practice), Volgograd: Volgograd. Gos. Tekh. Univ., 2008.
10. Anokhina, N.Yu., Matolygina, N.Yu., Lyukshin, B.A., and Lyukshin, P.A., Computer modeling of filled polymeric composition with particular deformation-durable properties, Mekh. Kompoz. Mater. Konstr., 2009, vol. 15, no. 4, pp. 600–609.
11. Bochkareva, S.A., Grishaeva, N.Yu., Lyukshin, B.A., Lyukshin, P.A., Matolygina, N.Yu., and Panov, I.L., Obtaining of specified effective mechanical, thermal, and electrical characteristics of composite filled with dispersive materials, Inorg. Mater.: Appl. Res., 2017, vol. 8, no. 5, pp. 651–661.10.1134/S2075113317050070 ↗
12. Shil’ko, S.V., Pleskachevskii, Yu.M., Panin, S.V., and Lyukshin, B.A., Computer modeling of polymer composites for technical and medical purposes, Mekh. Mash., Mekh. Mater., 2012, nos. 3–4 (20–21), pp. 149–157.
13. Lyukshin, B.A., Shil’ko, S.V., Panin, S.V., et al., Dispersno-napolnennye polimernye kompozity tekhnicheskogo i meditsinskogo naznacheniya (Disperse-Filled Polymeric Composites of Technical and Medical Purpose), Novosibirsk: Nauka, 2017.