journal article·2008-12

Tribological properties of high-melting oxides and non-metallic compounds at elevated temperatures. Part 2. Non-metallic compounds

A. P. Semenov

Journal of Friction and Wear· Volume 29· Issue 6
Publisher page

Abstract

The analysis of the information about the tribological properties of high-melting non-metallic oxygen- free compounds at elevated temperatures in the vacuum and air environment has permitted to identify the promising wear-resistant materials for application in high-temperature friction units: ceramics based on the silicon nitride and carbide and, boron carbide and cubic nitride, to a lesser extent; composite materials based on non-metallic compounds. to reduce friction when these materials contact with one another and different structural materials, solid lubricants should be used as components of composite materials or coatings. It is advisable to use ceramic materials as coatings deposited by modern techniques.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Encyclopedia. Mashinostroenie. T. II-4. Nemetallicheskie konstriktsonnye materialy (Non-metallic Structural Materials), Moscow: Mashinostroyenie, 2005.
2. Entsiklopediya Neorg. Mat. (Encyclopedia of Inordganic Materials), Kiev: Gl. Red. USE, 1977, 1, 2.
3. Svoistva, poluchenie i primenenie vysokotemp. Soedinenii. Handbook (Properties, Prod. and Appl. of High-Melting Compounds. Handbook), Ed. Kosolapova, T.Ya., Moscow: Metallurgya, 1986.
4. Spravochnik po konstruktsionnym materialam (Handbook of Strctural Materials), Ed. Arzamasov, B.N., Solovyeva, T.V., Moscow: Izd. MGTU im. N.E. Baumana, 2005, pp. 147–172.
5. Samsonov, G.V., Nemetallicheskie nitridy (Non-metallic Nitrides), Moscow: Metallurgya, 1996.
6. Gnesin, G.G., Beskislorodnye keramich. mat. (Oxygen-Free Ceramic Materials), Kiev: Tekhnika, 1987.
7. Andrievskii, R.A., Spivak, I.I., Nitrid kremniya i materialy na ego osnove (The Silicon Nitride and Materials on its Base), Moscow: Metallurgya, 1984.
8. Woydt, M., Abstr. Int. Tribology Conf., Yokohama, 1995, p. 81.
9. Gnesin, G.G., Osipova, I.I., Rontal’, G.D., et al., Keramichesrie instrumental’nye materialy (Ceramic Tool Materials), Kiev: Tekhnika, 1991.
10. Silva, R.F., Gomes, J.M., Miranda, A.S., Viera, J.M., Wear, 1991, vol. 148, no. 1, pp. 69–815.10.1016/0043-1648(91)90207-B ↗
11. Semenov, A.P., Friktsionnoe i adgezionnoe vzaimodeystvie materialov pri vysokikh temperaturakh (Frictional and Adhesive Interactions Materials at High Temperatures), Moscow: Nauka, 1972.
12. Semenov A.P., Trib. Int., 1995, vol. 28, no. 1, pp. 45–50.10.1016/0301-679X(95)99493-5 ↗
13. Semenov, A.P., Vestn. Mashinostr., 2005, no. 8, pp. 40–45.
14. Tkachenko, Yu. G., Tr. Iznos, 1981, vol. 2, no 5, pp. 864–876.
15. Semenov, A.P., Probl. Mashinostr. Nadezh. Mash., 1994, no. 1, pp. 59–67.
16. Semenov, A.P., Entsiklopediya, T. 4–1 “Detali mashin. Konstruktsinnaya prochnost’. Trenie, iznos, smazka”. (Encyclopedia, V. 4-1. Machine Parts. Structural Strength. Friction, Wear, Lubrication), Moscow: Mashinostroyenie, 1995, pp. 165–185.
17. Semenov, A.P., Kovsh, I.B., Petrova, I.M., et al., Metody i sredstva uprochneniya poverkhonstey detaley mashin kontsentrirovannymi potokami energii (Methods and Means of Surface Hardening of Parts with Concetrated Energy Fluxes), Moscow: Nauka, 1992.
18. Merzhanov, A.P., Protsessy goreniya i sinteza materalov (The Processes of Combustion and Synthesis of Materials), Chernogolovka: ISM RAN, 1998.
19. Tkachenko, Yu. G., Entsiklopediya. Mashonostrenie. O. 2–4 “Nemetallicheskie konstruktsionnye materaly” (Non-Metallic Structural Materials. V. 2–4). Moscow: Mashinostroyenie, 2005, pp. 283–290.
20. Bowden, F.P., Tabor, D., The Friction and Lubrication of Solids, Oxford: Clarendon Press, 1950, Pt. 1; 1964, Pt. 2.
21. Carrapichano J.M., Gomes J.R., Silva R.F., Wear, 2002, vol. 253, no. 9–10, pp. 1070–1076.10.1016/S0043-1648(02)00219-3 ↗
22. Pozdnyakov, V.V., Semenov, A.P., Rakov, S.I., et al., Phys. Chem. Treat. Mater., 1975, no. 6, pp. 131–134.10.1007/BF00883562 ↗
23. Chow, Y.K., Evans, C.J., Wear, 1999, vol. 225–229,Pt. 1, pp. 234–245.10.1016/S0043-1648(99)00012-5 ↗
24. Watanabe, S., Miyake, S., and Murakawa, M., Abstracts of Papers, Int. Tribology Conf., Yokohama: 1995, p. 339.
25. Hirose, Y., Miyoshi, K., Abstracts of Papers, Int. Tribology Conf., Yokohama: 1995, p. 495.
26. Martin, J.M., Le Mogne, T., Chassagnette, C., and Gardos, M.N., Trib. Trans., 1992, vol. 35, no. 3, pp. 462–472.10.1080/10402009208982144 ↗
27. Miyake, S., Watanabe, S., Murakawa, M., Kaneko, R., and Miyamoto T., Proc. 1st Int. Conf. “Application of Diamond Films and Related Materials”, Elsevier Science Publishers, 1991, pp. 669–674.
28. Mrotchek, G.A., Eisner, B.A., Proc. 1st Int. Conf. “Application of Diamond Films and Related Materials”, Elsevier Science Publishers: 1991, p. 675.
29. Buckley, D., Miyoshi, K., Wear (a celebration volume), 1985, vol. 100, pp. 333–353.10.1016/0043-1648(84)90020-6 ↗
30. Semenov, A.P., Pozdnyakov, V.V., and Kraposhina, L.B., Friktsionnoe i kontaktnoe vzaimodeistvie grafita i amaza c metallami i splavami (Contact Interactio of Graphite and Diamond with Metals and Alloys), Moscow: Nauka, 1974.
31. Shuab, M., Davies, T.J., Wear, 2001, vol. 49, no. 1–2, pp. 20–30.10.1016/S0043-1648(00)00545-7 ↗
32. Boch, P., Platon, F., and Kapelski, G., Proc. 5th Int. Congress on Tribology “Eurotrib 89”, Helsinki: 1989, vol. 3, pp. 114–119.
33. Kim, S.-S., Chae, J.-H., and Kim, D.-J., Tribology Letters, 2000, vol. 9, no. 3–4, pp. 227–232.
34. Gomes, J.R., Osendi, M.I., Miranzo, P., Silva, R.F., and Olivera, F.J., Wear, 1999, vol. 233–235, pp. 222–228.10.1016/S0043-1648(99)00243-4 ↗
35. Gomes, J.R., Olivera, F.J., Silva, R.F., Osendi, M.I., and Miranzo, P., Wear, 2000, vol. 239, no. 1, pp. 59–68.10.1016/S0043-1648(99)00367-1 ↗
36. Habig, K.-H., Woydt, M., Abstracts of Papers, Proc. 5th Int. Congress on Tribology “Eurotrib 89”, Helsinki: 1989, vol. 3, pp. 106–113.
37. Tani, H., Hisakado, T., Wear, 1999, vol. 224, no. 1, pp. 165–172.10.1016/S0043-1648(98)00338-X ↗
38. Lim, D.-S., Oh, J.-S., and Lee, K.-H., Abstracts of Papers, Int. Tribology Conf. Yokohama: 1995, p. 157.
39. Eyzop, B.L., Karlsson, S., Wear, 2001, vol. 249, no. 3–4, pp. 208–213.10.1016/S0043-1648(01)00563-4 ↗
40. Sanders, J.H., Cutler, J.N., Miller, J.A., and Zabinski, J.S., Trib. Int., 2000, vol. 32, pp. 649–659.10.1016/S0301-679X(99)00097-3 ↗
41. Allen, D.L., Trib. Trans., 1994, vol. 37, no. 2, pp. 369–377.10.1080/10402009408983310 ↗
42. Wang, L., Snidle, R.W., and Gu, L., Wear, 2000, vol. 246, no. 1–2, pp. 159–173.10.1016/S0043-1648(00)00504-4 ↗
43. Marei, A.R., Semenov, A.P., and Voronin, N.A., Probl. Mashinostr. Nadezhn. Mashin, 1993, no. 4, pp. 76–84.
44. Marei, A.R., Voronin, N.A., and Semenov, A.P., Poverkhnost’: fizika, khimiya, mekhanka, 1993, no. 10, pp. 100–105.