Structural and phase binder state and behavior during friction of WC-(Fe-Mn-C) composites
Source abstract
Abstract
The work presents results of analysis of the structure of the tribosurfaces and triboengineering characteristics of two composite materials WC-(Fe-Mn-C) with different structural and phase binder state after sliding on a steel disk within the range of velocities from 1 to 4 m/s under pressure 5 MPa. It is shown that the wear rate of the material heterophase binder structure containing fine crystalline granular austenite and a significant portion of tempered martensite in the original state exceeds at slower velocities (1 m/s) 3.5 times that of the composite with the austenite binder. As the velocity grows to 4 m/s, the wear resistance of these two materials approach and then nearly coincide. In the process of friction at all sliding velocities, the binders of both composites undergo γ → α-transformation, the extent and depth of which are governed by the acceleration.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Kul’kov, S.N. and Gnyusov, S.F., Karbidostali na osnove karbidov titana i vol’frama (Carbide Steels Based on Titanium and Tungsten Carbides), Dudarev, E.F., Ed., Tomsk: Izd. Nauch. Tekh. Lit., 2006.
2. Gnyusov, S.F. and Tarasov, S.Yu., Pattern of Wear and Evolution of Solid Alloy Structure in Friction, Perspekt. Mater., 1997, no. 6, pp. 38–42.
3. Sevostianova, I.N., Gnyusov, S.F. Garms A.P., and Kul’kov, S.N., Heat Treatment and Matrix Composition Effect on the Formation of Physical and Mechanical Properties of Solid Alloys WC-(Fe-Mn-C), Perspekt. Mater., 1998, no. 4, pp. 37–41.
4. Ye, H.Z., Liu, R., Li, D.Y., and Eadie, R., Development of a New Wear-Resistant Material: TiC/NiTi Composite, Scripta Mater., 1999, vol. 41, no. 10, pp. 1039–1045.10.1016/S1359-6462(99)00236-5 ↗
5. Savchenko, N.L. and Kul’kov, S.N., Structures Appearing on Tribosurfaces of TiC-NiTi Composites after High-Speed Sliding on Steel, Vestnik Tomsk. Gos. Univ., 2004, no. 32, pp. 84–88.
6. Rusakov, A.A., Rentgenographiya metallov (Radiography of Metals), Moscow: Atomizdat, 1977.
7. Bogachev, I.N. and Yegolaev, V.F., Struktura i svoistva zhelezomargantsevykh splavov (The Structure and Properties of Ferromanganese Alloys), Moscow: Metallurgia, 1973.
8. Teplov, V.A., Korshunov, L.G., Shabashov, V.A., et al., Structural Transformation of High-Manganese Austenite Steel during Shear Deformation under Pressure, Fiz. Met. Metalloved., 1988, vol. 66, no. 3, pp. 563–571.
9. Vinokur, B.B., Kondratyuk, S.E., Lutsenko, G.G., and Kasatkin, O.G., Effect of C and Mn Concentration on High-Manganese Steel Properties. Metally, 1986, no. 2, pp. 123–127.