Method of Tool Wear Control during Stainless Steel End Milling
Source abstract
Abstract
The article presents the results of the study of the assessment of the wear of the cutting tool during end milling of 06H14N6D2MBT-SH stainless steel by the method of analyzing the spectrum of sound signals. Monolithic carbide cutters with a protective coating were used for the study. Cutting data were calculated based on modal analysis to eliminate vibration. The milling was carried out on a DMU80P duoBlock machining center equipped with a special package for heavy machining. The sound signal was recorded using a Shure PGA-81-XLR narrow-beam microphone located in the working area of the machining center. The assessment of the wear of the cutting tool during milling was carried out on the basis of the analysis of the frequency spectrum of the sound signal, carried out by the method of fast Fourier transform. Actual cutting tool wear was measured at the back of the tooth on a Zoller Genius 3s. According to the results of the study, it has been established that the analysis of the frequency spectrum of the audio signal based on the fast Fourier transform algorithm makes it possible to objectively assess the magnitude and nature of the wear of the cutting edge of the cutter in the case of normal wear along the flank surface. Successful determination of wear in real time allows you to exclude breakages of the cutting tool, reduce economic costs associated with additional workpieces due to rejects, with machine downtime during repairs, etc. Timely determination of the amount of wear of the cutter will increase the coefficient of effective use of the cutting tool without forced stops of the machining process for visual monitoring of the condition of the cutting edges. The method for assessing wear in real time considered in the article has the prospect of subsequent automation and use in production conditions during machining on CNC machines.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Engineering Technology and Methodologies · Engineering Diagnostics and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Mokritskii, B.Ya. and Serebrennikova, A.G., Results of comparative study of cutting tool performance during machining of specialized stainless steels, Vestn. Irkutsk. Gos. Tekh. Univ., 2018, no. 22 (12), pp. 96–103. https://doi.org/10.21285/1814-3520-2018-12-96-10310.21285/1814-3520-2018-12-96-103 ↗
2. Vereshchaka, A.A., Bublikov, Yu.I., Oganyan, G.V., and Sadov, I.P., Increasing cutting speed and durability of cutting tools during turning of constructional steels using the multilayer composite nanostructured coatings, Metalloobrabotka, 2018, no. 6 (108), pp. 7–10. https://doi.org/10.25960/MO.2018.6.710.25960/MO.2018.6.7 ↗
3. Adaskin, A.M., Vereshchaka, A.A., and Vereshchaka, A.S., Study of wear mechanism of hard-alloy tools during machining of refractory alloys, J. Frict. Wear, 2013, vol. 34, no. 3, pp. 208–213. https://doi.org/10.3103/S106836661303002110.3103/S1068366613030021 ↗
4. Kayhan, M. and Budak, E., An experimental investigation of chatter effects on tool life, Proc. Inst. Mech. Eng., Part B, 2009, vol. 223, no. 11, pp. 1455–1463. https://doi.org/10.1243/09544054JEM150610.1243/09544054JEM1506 ↗
5. Altintas, Y., Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design, Cambridge: Cambridge Univ. Press, 2012, pp. 1–4.10.1017/CBO9780511843723 ↗
6. Siddhpura, M. and Paurobally, R., A review of chatter vibration research in turning, Int. J. Mach. Tools Manuf., 2012, vol. 61, pp. 27–47. https://doi.org/10.1016/j.ijmachtools.2012.05.007.X10.1016/j.ijmachtools.2012.05.007.X ↗
7. Zhang, X., Han, C., Luo, M., and Zhang, D., Tool wear monitoring for complex part milling based on deep learning, Appl. Sci., 2020, vol. 10, no. 19, pp. 1–20. https://doi.org/10.3390/app1019691610.3390/app10196916 ↗
8. Nakandhrakumar, R.S., Dinakaran, D., Pattabiraman, J., and Gopal, M., Tool flank wear monitoring using torsional–axial vibrations in drilling, Prod. Eng., 2019, vol. 13, no. 1, pp. 107–118. https://doi.org/10.1007/s11740-018-0866-410.1007/s11740-018-0866-4 ↗
9. Rafezi, H., Behzad, M., and Akbari, J., Time domain and frequency spectrum analysis of sound signal for drill wear detection, Int. J. Comput. Electr. Eng., 2012, vol. 4, no. 5, pp. 722–725. https://doi.org/10.7763/ijcee.2012.v4.59310.7763/ijcee.2012.v4.593 ↗
10. Matveev, Yu.N., Simonchik, K.K., Tropchenko, A.Yu., and Khitrov, M.V., Tsifrovaya obrabotka signalov (Digital Signal Processing), St. Petersburg: S.-Peterb. Gos. Univ. Inf. Tekhnol., Mekh. Opt., 2013.