Friction and Wear of Electrospark Coatings Made of Molybdenum, Bronze, and Combined (Ti + Al + C) Composition on Steel 45 in a Lubricant Medium
Source abstract
Abstract
This paper discusses the topical issue of the general compatibility of tribological pairs from the point of view of wear resistance when using various electrospark coatings. For investigation, steel segments were coated with bronze, Mo, and combined Ti + Al + C coatings by electrospark treatment. Coated segments and uncoated control segments were studied in a friction pair with an unhardened C45 steel roller (15HRC) at loads of 300 and 600 N in a lubricant medium. Throughout the test, the coefficient of friction was measured, the wear rate of the tested tribo-pairs was estimated, and the nature of the wear of the friction surfaces after testing was analyzed using optical and scanning electron microscopy (SEM). The results have shown that the most compatible tribo-pairs were steel 45/Bronze and steel 45/Mo, since they have exhibited the best resistance, i.e., the least wear under both loads tested.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Coatings · Engineering Technology and Methodologies · Advanced Theoretical and Applied Studies in Material Sciences and Geometry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Glimpses of the history of electrospark machining of materials (dedicated to the centenary of B.R. Lazarenko, Surf. Eng. Appl. Electrochem., 2010, vol. 46, no. 4, pp. 373–394. https://doi.org/10.3103/S106837551004013710.3103/S1068375510040137 ↗
2. Sahin, O. and Ribalko, A.V., Electrospark deposition: mass transfer, in Mass Transfer—Advanced Aspects, London: InTechOpen, 2011. https://doi.org/10.5772/2433910.5772/24339 ↗
3. Radek, N. and Bartkowiak, K., Performance properties of electro-spark deposited carbide-ceramic coatings modified by laser beam, Phys. Procedia, 2010, vol. 5, no. 1, pp. 417–423. https://doi.org/10.1016/j.phpro.2010.08.16310.1016/j.phpro.2010.08.163 ↗
4. Luo, P., Dong, S., Yangli, A., Sun, S., and Zheng, Z., Electrospark deposition of ZrB2–TiB2 composite coating on Cu–Cr–Zr alloy electrodes, Int. J. Surf. Sci. Eng., 2016, vol. 10, no. 1, pp. 41–54.10.1504/IJSURFSE.2016.075316 ↗
5. Penyashki, T., Radev, D., Kandeva, M., and Kosta-dinov, G., Structural and tribological properties of wear resistant coatings obtained by electrospark deposition, IOP Conf. Ser.: Mater. Sci. Eng., 2020, vol. 724, no. 1. https://doi.org/10.1088/1757-899X/724/1/01201510.1088/1757-899X/724/1/012015 ↗
6. Kukareko, V., Agafii, V., Mihailov, V., Grigorchic, A., and Kazak, N., Evaluation of tribological properties of hard coatings obtained on steel C45 by electro-spark alloying, Key Eng. Mater., 2019, vol. 813, pp. 381–386. https://doi.org/10.4028/www.scientific.net/KEM.813.38110.4028/www.scientific.net/KEM.813.381 ↗
7. Padgurskas, J., et al., Tribological properties of coatings obtained by electro-spark alloying C45 steel surfaces, Surf. Coat. Technol., 2017, vol. 311, pp. 90–97. https://doi.org/10.1016/j.surfcoat.2016.12.09810.1016/j.surfcoat.2016.12.098 ↗
8. Agafii, V., Padgurskas, J., Mihailov, V., Andriušis, A., Kreivaitis, R., and Ianachevici, A., Increasing wear resistance of 30X13 stainless steel by electrospark alloying, Proc. 8th Int. Sci. Conf. BALTTRIB, 2015, Kaunas, 2016, pp. 70–75. https://doi.org/10.15544/balttrib.2015.1410.15544/balttrib.2015.14 ↗