Modeling of Microstructures and Analysis of Abrasive Wear of Arc-Welded Hadfield Steel
Source abstract
Abstract
The results of analytical and experimental studies of the microstructures of the welded layers of the Hadfield steel (basic and alloyed with Cr, Ni, Mo, and B) have been presented. Layers additionally reinforced by coarse-grained tungsten carbide have also been studied. It has been shown that an austenitic microstructure prevails in the base and alloyed Hadfield steel. Analytical investigations of the coating structure shows the formation of 95–99% austenite and, in the case of the reinforced phase, the austenite content is 50–56% of the material (the remainder is tungsten carbide, cementite, etc.). It has been found that the presence of the strengthening phase of coarse-grained tungsten carbide, which reduces the amount of austenite under the conditions of abrasive wear, may exert both positive and negative impact on wear.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. ASM Handbook, Vol. 1: Properties and Selection: Irons, Steels, and High Performance Alloys, Materials Park, Oh: ASM Int., 2005.
2. Mirzaev, D.A., Koryagin, Yu.D., and Okishev, K.Yu., Effect of metallurgical factors on the mechanical properties and wear resistance of casted manganese steels, Izv. Chelyab. Nauch. Tsentra, 1999, no. 3, pp. 18–22.
3. Moghaddam, E.G., Varahram, N., and Davami, P., On the comparison of microstructural characteristics and mechanical properties of high-vanadium austenitic manganese steels with the Hadfield steel, Mater. Sci. Eng., A, 2012, vol. 532, pp. 260–266.10.1016/j.msea.2011.10.089 ↗
4. Chen, C., Zhang, F.C., Wang, F., Liu, H., and Yu, B.D., Effect of N + Cr alloying on the microstructures and tensile properties of Hadfield steel, Mater. Sci. Eng., A, 2017, vol. 679, pp. 95–103.10.1016/j.msea.2016.09.106 ↗
5. Nasajpour, A., Kokabi, A.H., Davami, P., and Nikzad, S., Effect of molybdenum on mechanical and abrasive wear properties of coating of as weld Hadfield steel with flux-cored gas tungsten arc welding, J. Alloys Compd., 2016, vol. 659, pp. 262–269.10.1016/j.jallcom.2015.11.071 ↗
6. Abbasi, M., Kheirandish, Sh., Kharrazi, Y., and Hejazi, J., On the comparison of the abrasive wear behavior of aluminum alloyed and standard Hadfield steels, Wear, 2010, vol. 268, pp. 202–207.10.1016/j.wear.2009.07.010 ↗
7. Jankauskas, V., Kreivaitis, R., Stonkus, D., and Andriusis, A., Research of strengthening plough parts by welding, Mechanika, 2008, vol. 69, no. 1, pp. 80–84.
8. Choteborsky, R. and Linda, M., FEM based numerical simulation for heat treatment of the agricultural tools, Agron. Res., 2015, vol. 13, no. 3, pp. 629–638.
9. Yang, Z. and Debroy, T., Modeling macro-and microstructures of Gas-Metal-Arc Welded HSLA-100 steel, Metall. Mater. Trans. B, 1999, vol. 30, no. 3, pp. 483–493.10.1007/s11663-999-0082-x ↗
10. Elmer FEM program. https://csc.fi/web/elmer; SciLab program. http://www.scilab.org/.
11. Jankauskas, V., Katinas, E., Varnauskas, V., Katinas, A., and Antonov, M., Assessment of the reliability of hard facings for soil rippers, J. Frict. Wear, 2015, vol. 36, no. 1, pp. 89–95.10.3103/S106836661501016X ↗