Antifriction Nanostructural Glass-Composite Self-Lubricating Coatings
Source abstract
Abstract
The results of a study of the friction and wear characteristics of the developed nanostructured glass-composite self-lubricating detonation coatings with the composition SiC–Ni–Cu–Al–Si–C additionally containing a SiO2–Al2O3–B2O3 aluminoborosilicate glass phase and structurally free MgC2, which forms α‑graphite during thermal decomposition are presented. It is indicated that their synergistic effect promotes the creation of an antifriction surface layer that minimizes contact parameters. An increase in the adhesion strength of the coatings is achieved by preliminarily applying a sublayer of glass-like sodium silicate Na2O(SiO2)2 onto the working surface. It is noted that the intercalation of the graphite layer by the particles of the subsurface zone does not affect the tribotechnical characteristics of the coatings. The developed coatings show high performance properties; here, the way of wear stabilization is the presence of a thin-film antifriction layer based on α-graphite, which shields unacceptable processes of molecular adhesion interaction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Makhesana Mayur, A. and Patel, K.M., Performance assessment of CaF2 solid lubricant assisted minimum quantity lubrication in turning, Proc. Manuf., 2019, no. 33, pp. 43–50. https://doi.org/10.1016/j.promfg.2019.04.00710.1016/j.promfg.2019.04.007 ↗
2. Justin, A.I. and Lenin, S.D., Tribological characterization of various solid lubricants based copper-free brake friction materials—a comprehensive study, Mater. Today, 2020, vol. 27, no. 3, pp. 2650–2656. https://doi.org/10.1016/j.matpr.2019.11.08810.1016/j.matpr.2019.11.088 ↗
3. Antsupov, A.V., Fedulov, A.A., Antsupov, A.V., and Antsupov, V.P., An application of antifriction coatings to increase the lifetime of friction units, Mech. Eng. MATEC Web of Conf., 2021, vol. 346, p. 03024.10.1051/matecconf/202134603024 ↗
4. Matuszewski, M., Slomion, M., Mazurkiewicz, A., and Wojciechowski, A., Mass wear application of cooperated elements for evaluation of friction pair components condition, Mech. Eng. MATEC Web of Conf., 2021, vol. 351, p. 01006. https://doi.org/10.1051/matecconf/20213510100610.1051/matecconf/202135101006 ↗
5. Babak, V.P., Shchepetov, V.V., and Nedaiborshch, S.D., Wear resistance of nanocomposite coatings with dry lubricant under vacuum, Nauk. Visn. Nats. Hirnych. Univ., 2016, no. 1. nbuv.gov.ua/UJRN/Nvngu_ 2016_1_9
6. Babak, V.P., Shchepetov, V.V., and Kharchenko, S.D., Antifriction nanocomposite coatings that contain magnesium carbide, J. Frict. Wear, 2019, no. 6, pp. 593–598. https://doi.org/10.3103/S106836661906003510.3103/S1068366619060035 ↗
7. Vilhena, L., Ferreira, F., Oliveira, J.C., and Ramalho, A., Rapid and easy assessment of friction and load-bearing capacity in thin coatings, Electronics, 2022, no. 11, p. 296. https://doi.org/10.3390/electronics1103029610.3390/electronics11030296 ↗
8. Zaytsev, A.N., Aleksandrova, Y.P., and Yagopolskiy, A.G., Comparative analysis of methods for assessing adhesion strength of thermal spray coatings, BMSTU J. Mech. Eng., 2021, no. 5 (734), pp. 48–59. https://doi.org/10.18698/0536-1044-2021-5-48-5910.18698/0536-1044-2021-5-48-59 ↗