journal article·2020-07

Antifriction and Mechanical Properties of the Thermoplastic Matrix of Polyetheretherketone-Based Composites

S. V. Panin, Nguyen Duc Anh, L. A. Kornienko, V. O. Alexenko, D. G. Buslovich, S. V. Shil’ko

Journal of Friction and Wear· Volume 41· Issue 4
Publisher page

Abstract

The structure and mechanical and tribological properties of composites based on a thermoplastic matrix of polyetheretherketone (PEEK) loaded with carbon fibers of various (nano-, micro and millimeter) sizes were studied. The research is aimed at developing composites applicable for use both in metal–polymer and ceramic–polymer tribojoints, including endoprostheses. It is shown that the surface layer of the PEEK composite loaded with carbon nanofibers can play a damping role in the friction process. This ensures an increased in wear resistance by 1.5–2 times. Carbon fibers of micron and millimeter length play a reinforcing role. Thus, the wear resistance of PEEK composites can be increased up to seven times in metal–polymer tribojoints, while this is reduced by 16 times in ceramic–polymer tribojoints. It is shown that by choosing the type and weight fraction of fiberlike fillers (carbon nano/micro/millimeter fibers) in PEEK matrix, the tribological and mechanical properties can be purposefully increased. This makes it possible to expand areas of application and product range for tribojoints in mechanical engineering and medicine, including those formed using additive technologies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Material Properties and Applications · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Walter, R., Friedrich, K., and Gurka, M., Characterization of mechanical properties of additively manufactured polymers and composites, AIP Conf. Proc., 2018, vol. 1981, art. ID 020033. https://doi.org/10.1063/1.504589510.1063/1.5045895 ↗
2. Brenken, B., et al., Fused filament fabrication of fiber-reinforced polymers: a review, Addit. Manuf., 2018, vol. 21, pp. 1–16. ISSN 2214-8604. https://doi.org/10.1016/j.addma.2018.01.00210.1016/j.addma.2018.01.002 ↗
3. Duty, C., et al., What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers, J. Manuf. Process., 2018, vol. 35, pp. 526–537. ISSN 1526-6125. https://doi.org/10.1016/j.jmapro.2018.08.00810.1016/j.jmapro.2018.08.008 ↗
4. Kumar, D., et al., Wear behavior of PEEK matrix composites: a review, Mater. Today, 2018, vol. 5, pp. 14583–14589
5. Werner, Ph., et al., Tribological behavior of carbon-nanofibre-reinforced poly(ether ether ketone), Wear, 2004, vol. 257, pp. 1006–1014.10.1016/j.wear.2004.07.010 ↗
6. Zhang, G., Structures and tribological performances of PEEK (poly-ether-ether-ketone)-based coatings designed for tribological application, Prog. Org. Coat., 2007, vol. 60, no. 1, pp. 39–44.10.1016/j.porgcoat.2007.06.004 ↗
7. Panin, S.V., et al., Wear-resistant polyetheretherketone composites: with carbon nano- and microfibers, Mater. Today, 2018, vol. 5, pp. 25976–25982.
8. Choi, H., Shil’ko, S., Gubicza, J. and Choe, H., Study of the compression and wear-resistance properties of freeze-cast Ti and Ti‒5W alloy foams for biomedical applications, J. Mech. Behav. Biomed. Mater., 2017, vol. 72, pp. 66–73.10.1016/j.jmbbm.2017.04.020 ↗
9. Shil’ko, S.V., Gavrilenko, S.L., and Panin, S.V., Analysis of the viscoelastic properties of polyetheretherketone and dispersion-filled composites based on it according to accelerated relaxation tests, Aktual. Vopr. Mashinoved., 2019, no. 8, pp. 401–404.
10. Panin, S.V., et al., Wear resistance of composites based on hybrid UHMWPE–PTFE matrix: mechanical and tribotechnical properties of the matrix, J. Frict. Wear, 2015, vol. 36, no. 3, pp. 249–256.10.3103/S1068366615030113 ↗
11. Kumar, D., Rajmohan, T., and Venkatachalapathi, S., Wear behavior of PEEK matrix composites: a review, Mater. Today, 2018, vol. 5, pp. 14 583–14 589.