journal article·2020-03

The Noise-Generating Mechanism during the Application of Disc Brakes on Rolling Stock

Yu. I. Osenin, Yu. V. Krivosheya, A. V. Chesnokov, L. I. Antoshkina, V. V. Bugaenko

Journal of Friction and Wear· Volume 41· Issue 2
Publisher page

Abstract

The results of a study of the noise generating mechanism during the application of disk brakes on rolling stock are presented. It is shown that one of the main sources of noise generation is the deformation of the microgeometry of the surface layer and its elastic recovery, which occurs under the influence of the interaction of the working elements of the disk brake. The influence of the ratio of the working areas of the friction elements that model the brake pad and brake disc on the noise intensity during their interaction is estimated. A design and technical method is proposed for reducing the noise level of a disk brake during braking, which consists of increasing the ratio between the working areas of the brake pad and brake disc.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Soil Mechanics and Vehicle Dynamics · Mechanical Systems and Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Giannini, O., Akay, A., and Massi, F., Experimental analysis of brake squeal noise on a laboratory brake setup, J. Sound Vib., 2006, vol. 292, no. 1, pp. 1–20.10.1016/j.jsv.2005.05.032 ↗
2. Sladkowski, A., Gaska, D., Haniszewski, T., and Margielewicz, J., Aktywna wibroizolacja drgań mechanicznych pasażerskiego wagonu kolejowego, Zesz. Nauk. Politech. Slask., Transp., 2015, vol. 87, no. 1929, pp. 63–71.
3. Minenko, E. and Kuramshin, D., Otsenka transportnogo shuma i metody ego snizheniya (Evaluation of Transport Noise and Its Reduction Methods), Moscow: LAP LAMBERT Academic, 2014.
4. Kragel’skii, I.V. and Gitis, N.V., Friktsionnye avtokolebaniya (Friction-Induced Self-Oscillations), Moscow: Nauka, 1987.
5. Spravochnik po tribotekhnike. Tom 1. Teoreticheskie osnovy (Handbook on Triboengineering, Vol. 1: Theoretical Foundations), Khebda, M. and Chichinadze, A.V., Eds., Moscow: Mashinostroenie, 1989.
6. Garkunov, D.N., Tribotekhnika (Triboengineering), Moscow: Mashinostroenie, 1985.
7. Braun, E.D., Bushe, N.A., and buyanovskii, I.A., Osnovy tribologii (Fundamentals of Tribology), Chichinadze, A.V., Ed., Moscow: Nauka i Tekhnika, 1995.
8. Bergman, F., Eriksson, M., and Jacobson, S., Influence of disc topography on generation of brake squeal, Wear, 1999, vols. 225–229, pp. 621–628.10.1016/S0043-1648(99)00064-2 ↗
9. Chen, G.X. and Zhou, Z.R., Correlation of a negative friction–velocity slope with squeal generation under reciprocating sliding conditions, Wear, 2003, vol. 255, pp. 376–384.10.1016/S0043-1648(03)00052-8 ↗
10. Guangxiong, C., Zhongrong, Z., Kapsa, P., and Vincent, L., Effect of surface topography on formation of squeal under reciprocating sliding, Wear, 2002, vol. 253, pp. 411–423.10.1016/S0043-1648(02)00161-8 ↗
11. Osenin, Yu.Yu., Sosnov, I.I., Sergienko, O.V., and Bugaenko, V.V., The stand for the testing of disk of high-speed break for the railways, Visn. Skhidnoukr. Nats. Univ. im. V. Dalya, 2013, no. 2, pp. 2, 99–103.
12. Mikhin, N.M. and Osenin, Yu.I., The influence of the stress state of the contact area of solids on the parameters of surface roughness and waviness, Probl. Tertya Znoshuvannya, 1988, no. 34, pp. 46–54.