The effect of fluorine oligomer coatings on the tribocontacts of a piezoelectric actuator
Source abstract
Abstract
The tribological study of the parameters of piezoactuator when switching over contacts a trib- ocouple deals with of rotation of piezoactuator steady during 500 m when the rotor from polished steel C45 (HRC 50, R a = 2 μm) is used. Often the rotation speed leaps up to 16-18 min-1. The coating with fluoroli- gomeric material stabilizes the rotation and continuous operation of piezoactuator. The steady rotation speed starts from a 50-m run (350 rotor revolutions, i.e., cycles of repeating impacts on the surface). The lower dam- age of the friction surface takes place after a 500-m run when the rotor is coated with fluoroligomeric mate- rial. Scratch tests show that steel surface with the fluoroligomeric layer has a lower hardness and 20% higher elasticity compared to a noncoated surface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Paine, J.S.N., Johns, M.E., Sesler, J.J., Stefanick, M.T., and Kennedy, J.A., Linear high-force “step and repeat” piezoelectric motors, Proc. 39th Aerospace Mechanisms Symp., 2008.
2. Uchino, K., Piezoelectric ultrasonic motors: overview, Smart Mater. Struct., 1998, vol. 7, pp. 273–285.10.1088/0964-1726/7/3/002 ↗
3. Padgurskas, J., Bansevičius, R., Žunda, A., Rukuiža, R., and Andriušis, A., Investigation of the tribological properties in the piezoelectric contact, Surf. Eng. Appl. Electrochem., 2013, vol. 49, no. 5, pp. 401–407.10.3103/S1068375513050104 ↗
4. Wallaschek, J., Contact mechanics of piezoelectric ultrasonic motors, Smart Mater. Struct., 1998, vol. 7, no. 3, pp. 369–381.10.1088/0964-1726/7/3/011 ↗
5. Padgurskas, J., Kurtinaitis, A., Žunda, A., Rukuiža, R., Andriušis, A., Bubulis, A., and Jankauskas, V., Tri- bological evaluation of nano-composite coatings in piezoelectric contact, J. Vibroeng., 2012, vol. 14, no. 4, pp. 1801–1806.
6. Gnecco, E. and Meyer, E., Fundamentals of Friction and Wear, Springer-Verlag: Berlin, Heidelberg, 2007.10.1007/978-3-540-36807-6 ↗
7. Gubanov, V.A., Troitschanskaja, P.E., Isakovich, V.S., and Struk, V.A., The influence of hydrophobic chemosorbic layers on the tribotechnical characteric- tics of pairs metal-metal and polymer-metal, Trenie Iznos, 1992, vol. 13, no. 2, pp. 306–310.
8. Padgurskas, J., Rukuiža, R., and Bubulis, A., Analysis of tribological properties of precise contact pairs, J. Vibroeng., 2011, vol. 13, no. 2, pp. 327–333.
9. Padgurskas, J., Rukuiža, R., Cesiulis, H., Amulevičius, A., Daugvila, A., Davidonis, R., Sipavičius, Č, and Mažeika, K., Influence of fluor-oligomers on the struc- tural and tribological properties of steel surface at the rolling friction, Ind. Lubr. Tribol., 2008, vol. 60, no. 5, pp. 222–227.10.1108/00368790810895141 ↗
10. Vasauskas, V., Padgurskas, J., and Rukuiža, R., Influ- ence of fluoroligomeric film on tribological properties in local contact conditions, Tribologie und Schmierung- stechnik, 2007, no. 2, pp. 28–30.