journal article·2019-11

Mathematical Modeling of the Resistance Force of the Profile of a Flat-Back Knife

O. V. Ageev, V. A. Naumov, J. A. Fatykhov

Journal of Friction and Wear· Volume 40· Issue 6
Publisher page

Abstract

Based on the energy approach, the resistance force of a knife profile is presented as the deformational force of friction at the level of the macroscopic scale provided that the surface of the faces is smooth. Mathematical models have been developed for the dimensional and dimensionless resistance forces of the profile considering the normal contact pressures on the inclined faces. The dependence of the dimensional force on the sharpening angle and the thickness of the knife, the rheological properties of muscle tissue, and the cutting speed has been established. The dependence of the dimensionless force on the dimensionless cutting speed and the measure of the elasticity of the muscle tissue has been determined. Expressions for the upper and lower limits of the resistance forces of the profile achieved by varying the cutting speed and the sharpening half-angle have been obtained.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Boisly, M., Schuldt, S., Kaestner, M.G., Schneider, Y., and Rohm, H., Experimental characterization and numerical modeling of cutting processes in viscoelastic solids, J. Food Eng., 2016, vol. 191, pp. 1–9.10.1016/j.jfoodeng.2016.06.019 ↗
2. Schuldt, S., Schneider, Y., and Rohm, H., High-speed cutting of foods: cutting behavior and initial cutting forces, J. Food Eng., 2018, vol. 230, pp. 55–62.10.1016/j.jfoodeng.2018.02.024 ↗
3. Pagani, M. and Perego, U., Explicit dynamics simulation of blade cutting of thin elastoplastic shells using “directional” cohesive elements in solid-shell finite element models, Comp. Methods Appl. Mech. Eng., 2015, vol. 285, pp. 515–541.10.1016/j.cma.2014.11.027 ↗
4. Atkins, T., Prediction of sticking and sliding lengths on the rake faces of tools using cutting forces, Int. J. Mech. Sci., 2015, vol. 91, pp. 33–45.10.1016/j.ijmecsci.2014.06.004 ↗
5. Ageev, O.V., Naumov, V.A., Fatykhov, Yu.A., and Samoilova, N.V., Analysis of conformity of rheological models to structural and mechanical properties of fish, Nauchno-Tekh. Vestn. S.-Peterb. Gos. Univ. Inf. Tekhnol., Mekh. Opt., 2018, no. 2 (36), pp. 34–43.10.17586/2310-1164-2018-11-2-34-43 ↗
6. Goryacheva, I.G., Mekhanika friktsionnogo vzaimodeistviya (Mechanics of Friction Interaction), Moscow: Nauka, 2001.
7. Popov, V. L., Contact Mechanics and Friction: Physical Principles and Applications, Berlin: Springer-Verlag, 2017.10.1007/978-3-662-53081-8 ↗
8. Soldatenkov, I.A., Calculation of the deformation component of the force of friction for a standard elastoviscous base, J. Frict. Wear, 2008, vol. 29, no. 1, pp. 7–14.10.3103/S1068366608010029 ↗
9. Soldatenkov, I.A., Calculation of friction for indenter with fractal roughness that slides against a viscoelastic foundation, J. Frict. Wear, 2015, vol. 36, no. 3, pp. 193–196.10.3103/S1068366615030137 ↗
10. Ageev, O.V., Naumov, V.A., Fatykhov, Yu.A., and Samoilova, N.V., Mathematical modeling of normal contact pressure forces on inclined edges of a knife during fish cutting, Izv. Kaliningr. Gos. Tekh. Univ., 2017, no. 47, pp. 80–96.10.17586/2310-1164-2017-10-4-27-42 ↗