Tribological Properties of a C/C–SiC–Cu Composite Brake Disc
Source abstract
Abstract
A life-size composite brake disc was produced from Si, carbon–carbon composite, copper, and phenol resin. The disc had an outer radius Ø380, inner radius Ø180, and thickness of 36 mm. Chopped carbon fibers were used to reinforce frictional and structural layers. To obtain a preform of each layer, resin and carbon-fibers were mixed and hot-pressed. The preforms were pyrolyzed, and bonded by hot pressing. Finally Si and Cu infiltration in vacuum atmosphere was carried out to obtain a C/C–SiC–Cu x Si y composite brake disc. The density of the disc was 2.17 g/cm3. The bending strength was 61 MPa. The heat transfer coefficients in vertical and horizontal directions were 30.7, and 85.2 W/m-°C at 25°C, respectively. Friction coefficients of the C/C–SiC–Cu x Si y brake disc were more stable than those of C/C–SiC brake discs. X-ray diffraction analysis showed that Cu formed a compound, Cu3Si.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Tribology and Wear Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Goo, B.C., Development and characterization of C/C–SiC brake disc, Mater. Manuf. Process., 2015. doi 10.1080/10426914.2015.1019112
2. Quian, Y., Zhang, W., Ge, M., and Wei, X., Frictional response of a novel C/C–ZrB2–ZrC–SiC composite under simulated braking, J. Adv. Ceram., 2013, vol. 2, no. 2, pp. 157–161.10.1007/s40145-013-0055-z ↗
3. Fan, X., Yin, X., He, S., Zhang, L., and Cheng, L., Friction and wear behaviors of C/C–SiC composites containing Ti3SiC2, Wear, 2012, vols. 274–275, pp. 188–195.10.1016/j.wear.2011.08.029 ↗
4. Moriyama, M., Takao, Y., Wang, W.X., and Matsubara, T., Fatigue characteristics of metal impregnated C/C composites with slots for load transfer, Int. J. Fatigue, 2010, vol. 32, no. 1, pp. 208–217.10.1016/j.ijfatigue.2009.02.011 ↗
5. Moriyama, M., Takao, Y., Wang, W.X., and Matsubara, T., Strength of metal impregnated C/C under tensile cyclic loading, Compos. Sci. Technol., 2006, vol. 66, no. 15, pp. 3070–3082.10.1016/j.compscitech.2005.11.040 ↗
6. Wang, W.X., Takao, Y., and Matsubara, T., Tensile strength and fracture toughness of C/C and metal infiltrated composites Si–C/C and Cu–C/C, Composites, Part A, 2008, vol. 39, pp. 231–242.10.1016/j.compositesa.2007.11.004 ↗
7. Xiao, P., Zhou, W., Li, Z., and Xiong, X., Fabrication and properties of CuxSiy modified C/C–SiC composites, Chin. J. Nonferrous Met., 2010, vol. 20, no. 2, pp. 2344–2350.
8. Yuan, F.W., Wang, C.Y., Li, G.A., Chang, S.H., Chu, L.W., Chen, L.J., and Tuan, H.Y., Solutionphase synthesis of single-crystal Cu3Si nanowire arrays on diverse substrates with dual functions as high-performance field emitters and efficient anti-reflective layers, Nanoscale, 2013, vol. 5, pp. 9875–9881.10.1039/c3nr03045h ↗
9. Iyuke, S.E., and Simate, G.S., Synthesis of carbon nanomaterials in a swirled floating catalytic chemical vapor deposition reactor for continuous and large-scale production, 2015, http://www.intechopen.com.
10. Desplanques, Y., Roussette, O., Degallix, G., Copin, R., Berthier, Y., Analysis of tribological behaviour of pad–disc contact in railway braking: Part 1. Laboratory test development, compromises between actual and simulated tribological triplets, Wear, 2007, vol. 262, pp. 582–591.10.1016/j.wear.2006.07.004 ↗