journal article·2010-12

Tribological behavior of thin electroplated and chemically deposited Ni-P coatings on copper substrates

N. K. Myshkin, A. Ya. Grigoriev, D. M. Gutsev, M. Ignat, E. Chainet, V. Grandvallett, J. Sautel

Journal of Friction and Wear· Volume 31· Issue 6
Publisher page

Abstract

The paper deals with the study of the tribological behavior of thin (1 and 5 μm thick) Ni-P coatings formed on plates made of electrotechnical copper by electroplating and chemical deposition. It has been found that after heat treatment, owing to diffusion processes, the coating components are capable of penetrating into the substrate material—to a depth of 15 μm for electroplated coatings and of 35 μm for chemically deposited coatings)—and influencing the mechanical properties of a specimen such as the hardness and friction coefficient. A correlation between the wear mode of the coating and the method of its deposition has been found. The results show that thin (one μm thick and lesser) Ni-P chemically deposited coatings are promising for being used in friction units of precise mechanical devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Lubricants and Their Additives · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Reidel, W., Electroless Nickel Plating, Redwood Press, 1991.
2. Tseev, N.A., Kozelkin, V.V., and Gurov, A.A., Materials for Dry Friction Units Operating in Vacuum, Moscow: Mashinostroenie, 1991.
3. Zoikis-Karathanasis, A., Pavlatou, E.A., and Spyrellis, N., The effect of heat treatment on structure and hardness of pulse electrodeposited NiP-WC composite coatings, Electrochimica Acta 2008, pp. 2563–2570.10.1016/j.electacta.2008.07.027 ↗
4. Lu, G.X., Li, G.F., and Yu, F.C., The effect of phosphorus content and heat treatment on wear resistance of electroless deposited Ni-P alloys, Wear, 1989, vol. 103, pp. 228–238.
5. Wang, L., Gao, Y., Xu, T., and Xue, Q., Corrosion resistance and lubricated sliding wear behaviour of novel Ni-P graded alloys as an alternative to hard Cr deposits, Applied Surface Science, 2006, vol. 252, pp. 7361–7372.10.1016/j.apsusc.2005.08.040 ↗
6. Staffelini, G., Colombo, D., and Molinary, A., Surface durability of electroless Ni-P composite deposits, Wear, 1999, vol. 236, pp. 179–188.10.1016/S0043-1648(99)00273-2 ↗
7. Ramesh, C.S., Keshavamurthy, R., Channabasappa, B.H., and Pramod, S., Friction and wear behavior of Ni-P coated Si3N4 reinforced Al6061 composites, Tribology International, 2010, vol. 43, no 3, pp. 623–634.10.1016/j.triboint.2009.09.011 ↗
8. Vafaei-Makhsoos, E., Electron diffraction study of newly discovered nickel phosphides in partially crystallized amorphous electrodeposited Ni-P thin films, J. Appl. Phys., 1980, vol. 51, pp. 63–66.10.1063/1.327626 ↗
9. Guo, Z., Keong, K.G., and Sha, W., Crystallisation and phase transformation behaviour of electroless nickel phosphorus platings during continuous heating, Journal of Alloys and Compounds, 2003, nos. 1–2, pp. 112–119.10.1016/S0925-8388(03)00069-0 ↗
10. Vityaz, P.A., Kukareko, V.A., Tsybulskaya, L.S., Bekish, Yu.N., and Gatvskaya, T.V., Structure and tribological properties of Ni-B and Co-B galvanic coatings, Journal of Friction and Wear, vol. 31, pp. 1–12.