Structure and tribological characteristics of steel under melting by plasma flow and simultaneous Mo and W alloying
Source abstract
Abstract
New findings of studies of the structural, tribological, and physicomechanical characteristics of structural steel 40Kh treated by plasma flow under melting accompanied by either tungsten or molybdenum alloying are presented. Rutherford back-scattering of ions, scanning electron microscopy (with microanalysis), X-ray fluorescent spectral analysis, X-ray phase analysis, wear-resistance tests, measurement of the coefficient of friction, and transmitting electron microscopy with diffraction are the basic research methods. It is found experimentally that a thin layer 5 μm thick saturated with nitrogen and an alloying element (Mo or W) with regularly arranged crystallites arises on the steel 40Kh surface. The crystallites in this layer have a needle- and ribbon-shaped structure. A deeper layer located about 40 μm thick consists of micro- and nanosized grains. Friction and wear studies of the plasma-flow treated (melt) samples show the steel wear resistance to increase 2–2.5 times and the coefficient of friction to decrease from 0.4–0.5 to 0.10–0.15 compared to the untreated samples.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Podgornik, B. and Vizintin, J., Wear Resistance of Pulse Plasma Nitrated AISI 4140 and A355 Steels, Mater. Sci. Eng. A: Struct. Mater., 2001, vol. 315, nos. 1/2, pp. 28–34.10.1016/S0921-5093(01)01202-3 ↗
2. Grimanelis, D. and Eyre, T.S., Wear Characteristics of a Diffusion Bonded Sintered Steel with Short Term Surface Treatments, Wear, 2007, vol. 262, nos. 1–2, pp. 93–103.10.1016/j.wear.2006.04.006 ↗
3. Pantelis, D.I., Bouyiouri, E., Kouloumbi, N., et al., Wear and Corrosion Resistance of Laser Surface Hardened Structural Steel, Surf. Coat. Technol., 2002, vol. 161, nos. 2–3, pp. 125–134.10.1016/S0257-8972(02)00495-4 ↗
4. Manova, D., Mandl, T.S., Neumann, H., and Rauschenbach, B., Wear Behavior of Martensitic Stainless Steel after PIII Surface Treatment, Surf. Coat. Technol., 2005, vol. 200, nos. 1–4, pp. 137–140.10.1016/j.surfcoat.2005.02.085 ↗
5. Bonek, M., Dobrza, L.A., Hajduczek, E., and Klimpel, A., Structure and Properties of Laser Alloyed Surface Layers on the Hot-Work Tool Steel, J. Mater. Proc. Technol., 2006, vol. 175, nos. 1–3, pp. 45–54.10.1016/j.jmatprotec.2005.04.029 ↗
6. Tarasov, S.Yu. and Kolubaev, A.V., Development of Deformation on Different Metastable Levels in Surface Layers upon Friction, Deform. Razrush. Mater., 2008, no. 1, pp. 21–27.
7. Pogrebnyak, A.D., Shpak, A.P., Azarenkov, N.A., and Beresnev, V.M., Structures and Properties of Hard and Superhard Nanocomposite Coatings, Phys.-Usp., 2009, vol. 52, no. 1, pp. 29–54.10.3367/UFNe.0179.200901b.0035 ↗
8. Shorshorov, M.Kh., Ul’tradispersnoe strukturnoe sostoyanie metallicheskikh splavov (Ultradispersed Structure State of Metal Alloys), Moscow: Nauka, 2001.
9. Al’-Tibbi, V.Kh., Kabirov, Yu.V., and Dymochkin, D.D., About Nano-Size Effect at Strengthening of Friction Surfaces by Electroacoustic Sputtering Method, Elektr. Zh. “Issledovano v Rossii”, 2005, pp. 144–156.
10. Lu, K., Nanocrystalline Metals Crystallized from Amorphous Solids: Nanocrystallization, Structure, and Properties, Mater. Sci. Eng., 1996, vol. R16, pp. 161–221.10.1016/0927-796X(95)00187-5 ↗
11. Todaka, Y., Umemoto, M., Li, J., and Tsuchiya, K., Nanocrystallization of Carbon Steels by Shot Peening and Drilling, Rev. Adv. Mater. Sci., 2005, vol. 10, pp. 409–416.
12. Pogrebnjak, A.D.. and Tolopa, A.M., A Review of High-Dose Implantation and Production of Ion Mixed Structures, Nucl. Instrum. Meth., Sect. B, 1990, vol. 50, pp. 25–43.10.1016/0168-583X(90)90598-O ↗
13. Boiko, V.I., Valyaev, A.N., and Pogrebnyak, A.D., Metal Modification by High-Power Pulsed Particle Beams, Phys.-Usp., 1999, vol. 42, no. 11, pp. 1139–1166.10.1070/PU1999v042n11ABEH000471 ↗
14. Pogrebnyak, A.D. and Tyurin, Yu.N., Modification of Material Properties and Coating Deposition Using Plasma Jets, Phys.-Usp., 2005, vol. 48, no. 5, pp. 487–514.10.1070/PU2005v048n05ABEH002055 ↗
15. Tyurin, Yu.N. and Zhadkevich, M.L., Plazmennye uprochnyayushchie tekhnologii (Plasma Strengthening Technologies), Kiev: Naukova Dumka, 2008.
16. Mason, J.H. and Wisko, J.H., Spot and Continuous Welding with Solid State Lasers, Technical Paper SME, MR-74, 955, 1974, pp. 79–83.
17. Borodina, G.G., Kraposhin, V.S., Romanov, Yu.A., et al., Structure of Commercial Iron in the Effective Irradiation Zone of a Continuous CO2 Laser, Met. Sci. Heat Treat., 1983, vol. 25, no. 4, pp. 258–261.10.1007/BF00778318 ↗
18. Moryashchev, S.F., Kislitsyn, A.A., and Kosyrev, F.K., Optimization of Parameters of Steel Annealing Process by Irradiation of CO2 Laser, Fiz. Khim. Obrab. Mater., 1984, no. 1, pp. 23–29.
19. Beresnev, V.M., Pogrebnyak, A.D., Azarenkov, N.A., et al., Nanocrystalline and Nanocomposite Coatings, Structure, Properties, Fiz. Inzh. Poverkhn., 2007, vol. 6, nos. 1–2, pp. 4–27.
20. Pogrebnjak, A.D., Danilionok, M.M., Uglov, V.V., et al., Structure and Properties of Nanocomposite Combined Coatings on the Base of Ti-Cr-N/Ni-Cr-B-Si-Fe, Vacuum, 2009, vol. 83, pp. 235–239.10.1016/j.vacuum.2009.01.071 ↗
21. Beresnev, V.M., Pogrebnyak, A.D., and Malikov, L.V., Structure and Trubological Behavior of Layered TiN-Mo Coatings Obtained from Metallic Plasma Flows, J. Friction Wear, 2008, vol. 29, no. 1, pp. 35–38.10.3103/S1068366608010066 ↗
22. Uglov, V.V., Poluyanova, M.G., Astashynski, V.M., et al., The Influence of the Coating Thickness on the Phase and Element Composition of “Ti Coating/Steel” System Surface Layer Treated by a Compression Plasma Flow, Plasma Proc. Polymers, 2009, vol. 6, pp. 178–182.10.1002/ppap.200930507 ↗
23. Tyurin, Yu.N. and Kolisnichenko, O.V., Plasma-Detonation Technology for Modification of the Surface Layer of Metal, Open Surf. Sci. J., 2009, no. 1, pp. 13–19.10.2174/1876531900901010013 ↗
24. Smithells Metals Reference Book, Gale, W.F. and Totemeier, T.C., Eds., Elsevier, 2004, 8th Ed.; Moscow: Metallurgiya, 1980, 5th Ed.
25. Yakushin, V.L., Kalin, B.A., Polsky, V.I., et al., Investigation of the Structural Phase State of Cladded Steels Treated by Pulsed Plasma Flows, Proc. 8th Int. Conf. on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 2006, pp. 693–696.
26. Uglov, V.V., Cherenda, N.N., and Anischik, V.M., et al. Material Modification by Compression Plasma Flows, Proc. 9th Int. Conf. on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 2008, pp. 153–157.