Tribological studies for developing friction modifiers in the wheel–rail system
Source abstract
Abstract
In this work, friction modifiers in a wheel–rail system and their operation mechanism are considered. Three stages of a complex tribological study and tribological tests are applied within the development of friction modifiers and estimation of their tribological properties. The first stage (Institute of Element and Organic Compounds, Russian Academy of Sciences) is to elaborate hydroalcoholic soluble compounds and polymeric binders, as well as of methods of applying them to steel surfaces, and to study their tribological characteristics using an I-47 friction machine. The second stage (Institute of Mechanics Problems, Russian Academy of Sciences) is devoted to probing of tribological characteristics and durability of the elaborated composites on a tribometer, which allows to implement a cylinder–plate contact interaction under full slip conditions. The third stage (JSC “Railway Research Institute”) is aimed at studying the tribological parameters of the developed modifier composites at rolling-sliding conditions under real contact pressure of 1200 MPa.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Railway Engineering and Dynamics · Advancements in Materials Engineering · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Bogdanov, V.M. and Zakharov, S.M., Contemporary problems of wheel-rail system, Zheleznye dorogi mira, 2004, no. 1, pp. 38–40.
2. Guidelines to Best Practices for Heavy Haul Railway Operations: Wheel and Rail Interface Issues, Virginia Beach, Virginia: Int. Heavy Haul Assoc., 2001.
3. Luzhnov, Yu.M., Stseplenie koles s rel’sami (priroda i zakonomernosti) (Adhesion of Wheels and Rails (Nature and Regularities), Moscow: Intekst, 2003.
4. Goryacheva, I.G., Torskaya, E.V., Zakharov, S.M., Markov, D.P., Zharov, I.A., Krasnov, A.P., and Yudin, A.S., Assessing operating conditions and required properties of friction modifiers for running surfaces of rail-wheel system, J. Frict. Wear, 2013, vol. 34, pp. 415–420.10.3103/S106836661306007X ↗
5. Eadie, D., Kalousek, J., and Chiddic, K., The role of high positive friction (HPF) modifier in the control of short pitch corrugation and related phenomena, Wear, 2002, vol. 253, pp. 185–192.10.1016/S0043-1648(02)00098-4 ↗
6. Zakharov, S.M. and Markov, D.P., Friction control in “wheel-rail” system, Zheleznodor. Transport, 2013, no. 5, pp. 38–40.
7. Krasnov, A.P., Gribova, I.A., Fedorova, L.F., Afonicheva, O.V., and Mit’, V.A., Polymer antifriction selflubricating wear-resistant materials and coatings, Tyazh. Mashinostr., 2001, no. 4, pp. 31–34.
8. Krasnov, A.P., Naumkin, A.V., Yudin, A.S., Afonicheva, O.V., Goloveshkin, A.S., Lenenko, N.D., Bushmarinov, I.S., Golub’, A.S., Aderikha, V.N., Pesetsky, S.S., and Maslakov, K.I., Effect of particle size and composition of powdered nanocrystalline molybdenum disulfide on its tribological behavior, J. Frict. Wear, 2014, vol. 35, pp. 330–338.10.3103/S1068366614040060 ↗
9. Morozov, A.V., Experimental determination of static and dynamic coefficients of sliding friction of epilamcoated materials, J. Frict. Wear, 2014, vol. 35, pp. 84–88.10.3103/S1068366614020093 ↗
10. Fletcher, D.I. and Lewis, S., Creep curve measurement to support wear and adhesion modeling, using a continuously variable creep twin disc machine, Wear, 2013. vol. 298–299, pp. 57–65.10.1016/j.wear.2012.11.065 ↗