journal article·2020-01

A Study of the Durability of Hardened Plough Point

V. Jankauskas, E. Katinas, M. Pusvaškis, R. Leišys

Journal of Friction and Wear· Volume 41· Issue 1
Publisher page

Abstract

The wear of plough points of different structures and materials in soils with different moistures, hardnesses, and levels of stoniness was studied. It was found that hardening of the cutting edge (the working face) by hard alloy plates based on tungsten carbide effectively reduces the wear on the length and width of plough points. In addition, the surfacing of the front surface of plough points effectively decreases the wear according to their mass and thickness. However, these hardening methods are only effective on sandy and loamy soils. These methods are not effective on a stony soil. After damage of the surfacing of the hard alloy plates, accelerated wear of plough points according to their mass, length, and width occur and their operation does not meet agrotechnical requirements.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Lubricants and Their Additives · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Holmberg, K. and Erdemir, A., Influence of tribology on global energy consumption, costs and emissions, Friction, 2017, vol. 5, no. 3, pp. 263–284.10.1007/s40544-017-0183-5 ↗
2. Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K., and Erdemir, A., Global energy consumption due to friction and wear in the mining industry, Tribol. Int., 2017, vol. 115, pp. 116–139.10.1016/j.triboint.2017.05.010 ↗
3. Sadeghi, F., Najafi, H., and Abbasi, A., The effect of Ta substitution for Nb on the microstructure and wear resistance of an Fe–Cr–C hardfacing alloy, Surf. Coat. Technol., 2017, vol. 324, pp. 85–91.10.1016/j.surfcoat.2017.05.067 ↗
4. Jankauskas, V., Kreivaitis, R., Milcius, D., and Baltušnikas, A., Analysis of abrasive wear performance of arc welded hard layers, Wear, 2008, vol. 265, pp. 1626–1632.10.1016/j.wear.2008.03.022 ↗
5. Narayanaswamy, B., Hodgson, P., and Beladi, H., Effect of microstructure on abrasive wear behavior, Agric. Eng., 2015, vol. 47, pp. 1–4.
6. Bayhan, Y., Reduction of wear via hardfacing of chisel ploughshare, Tribol. Int., 2006, vol. 39, no. 6, pp. 570–574.10.1016/j.triboint.2005.06.005 ↗
7. Natsis, A., Petropoulos, G., and Pandazaras, C., Influence of local soil conditions on mouldboard ploughshare abrasive wear, Tribol. Int., 2008, vol. 41, no. 3, pp. 151–157.10.1016/j.triboint.2007.06.002 ↗
8. Jankauskas, V., Strengthening machine elements working under abrasive environment by alloying with hard layers and their estimation, Mechanika, 2006, vol. 57, no. 1, pp. 55–60.
9. Jankauskas, V., Katinas, E., Skirkus, R., and Alekneviciene, V., The method of hardening soil rippers by surfacing and technical-economic assessment, J. Frict. Wear, 2014, vol. 35, no. 4, pp. 270–277.10.3103/S106836661404014X ↗
10. Kostencki, P., Stawicki, T., Królicka, A., and Sędłak, P., Wear of cultivator coulters reinforced with cemented-carbide plates and hardfacing, Wear, 2019, vols. 438–439, p. 203 063.10.1016/j.wear.2019.203063 ↗
11. Stawicki, T., Kostencki, P., and Białobrzeska, B., Wear resistance of selected cultivator coulters reinforced with sintered-carbide plates, Arch. Civil Mech. Eng., 2018, vol. 18, pp. 1661–1678.10.1016/j.acme.2018.07.005 ↗
12. Kostencki, P., Stawicki, T., and Białobrzeska, B., Durability and wear geometry of subsoiler shanks provided with sintered carbide plates, Tribol. Int., 2016, vol. 104, pp. 19–35.10.1016/j.triboint.2016.08.020 ↗
13. Katinas, E., Jankauskas, V., Kairys, P., and Leišys, R., Research of strengthened plough point by plasma transferred arc welding, Agric. Eng., 2017, vol. 49, pp. 1–5.