Tribological behavior of polytetrafluoroethylene-silica composites
Source abstract
Abstract
The effect of finely dispersed silica on the structure and mechanical and tribological characteristics of polytetrafluoroethylene-silica composites is studied. It is shown that the introduction of a small amount of filler (0.5%) results in qualitative and quantitative changes in the supermolecular structure of the polymer matrix, which entail variations in the friction coefficient and wear rate of the composites. During friction, dispersion of the filler and its accumulation in the composite’s surface occur. Within a narrow range of the filling degree, this causes a considerable rise of the abrasiveness of the composite accompanied with high wear resistance, which may be attributed to an increase in the adhesion of transfer films. The maximal wear resistance of polytetrafluoroethylene-silica composites is found when the filler is present in a small quantity, providing for a combination of high strength characteristics, low friction coefficient, and moderate abrasiveness.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Tanaka, K., Uchiyama, Y., and Toyooka, S., The Mechanism of Wear of Polytetrafluoroethylene, Wear, 1973, vol. 23, no. 1, pp. 153–172.10.1016/0043-1648(73)90081-1 ↗
2. Arkles, B.C., Gerakaris, S., and Goodhue, R., Wear Characteristics of Fluoropolymer Composites, in Advances in Polymer Friction and Wear, Lee, L.-Y., Ed., New York: Plenum, 1974, pp. 663–688.10.1007/978-1-4613-4461-2_18 ↗
3. Evans, D.C. and Lancaster, J.K., Wear of Polymers, in Treatise on Materials Science and Technology, Scott, D., Ed., New York: Academic Press, 1979.
4. Blanchet, T.A. and Kennedy, F.E., Sliding Wear Mechanism of Polytetrafluoroethylene (PTFE) and PTFE Composites, Wear, 1992, vol. 153, no. 1, pp. 229–243.10.1016/0043-1648(92)90271-9 ↗
5. Okhlopkova, A.A., Petrova, P.N., Krasnov, et al., Temperature Dependencies of Tribotechnical Parameters of PTFE-Based Composites and Natural Zeolites, Trenie Iznos, 2003, vol. 24, no. 3, pp. 295–300.
6. Aderikha, V.N. and Shapovalov, V.A., Exploitation Characteristics of Tribotechnical Fluoroplast-Carbon Black Composites, Materialy, Tekhnologii, Instrumenty, 2009, vol. 14, no. 3, pp. 31–41.
7. Okhlopkova, A.A., Vinogradov, A.V., and Pinchuk, L.S., Plastiki, napolnennye ul’tradispersnymi neorganicheskimi soedineniyami, (Plastics Filled by Ultradispersed Inorganic Compounds), Gomel’: IMMS NANB, 1999.
8. Okhlopkova, A.A. and Petrova, P.N., Modification of Politetrafluorethylene by Natural Zeolites, Materialy, Tekhnologii, Instrumenty, 2003, vol. 8, no. 4, pp. 58–63.
9. Moynihan, R.E., The Molecular Structure of Perfluorocarbon Polymers. Infrared Studies on Polytetrafluoroethylene, J. Am. Chem. Soc., 1959, vol. 81, pp. 1045–1050.10.1021/ja01514a009 ↗
10. Pugachev, A.K. and Roslyakov, O.A., Pererabotka ftoroplastov v izdeliya. Tekhnologiya i oborudovanie (Retreatment of Fluoroplasts in Articles. Technology and Equipment), Leningrad: Khimiya, 1987.
11. Ku, D., Structure and Mechanical Properties of Fluoropolymers, in Ftorpolimery (Fluoropolymers), Moscow: Mir, 1975.
12. Uord, I., Mekhanicheskie svoistva tverdykh polimerov (Mechanical Properties of Solid Polymers), Moscow: Khimiya, 1975.
13. Aderikha, V.N., Shapovalov, V.A., and Pleskachevskii, Yu.M., Structure and Wear-Resistance of PTFE-Carbon Black Composites, Trenie Iznos, 2008, vol. 29, no. 2, pp. 160–168.
14. Tanaka, K.. and Kawakami, S., Effect of Various Fillers on the Friction and Wear of Polytetrafluoroethylene-Based Composites, Wear, 1982, vol. 79, no. 2, pp. 221–234.10.1016/0043-1648(82)90170-3 ↗
15. http://www.silikagel.ru/import.htm.
16. Arkies, B., Theberge, J., and Schireson, M., Wear Behavior of Thermoplastic Polymer-Filled PTFE Composites, Lubr. Eng., 1977, vol. 33, no. 1, pp. 33–38.
17. Gendron-Badou, A., Coradin, T., Maquet, et al., Spectroscopic Characterization of Biogenic Silica, J. Non-Cryst. Solids, 2003, vol. 316, pp. 331–337.10.1016/S0022-3093(02)01634-4 ↗
18. Tanaka, K., Friction and Wear of Glass and Carbon Fiber-Filled Thermoplastic Polymers, Transactions of ASME, 1977, pp. 408–414.10.1115/1.3453234 ↗
19. Gardos, M.N., Theory and Practice of Self-Lubricating, Oscillatory Bearings for High-Vacuum Applications. Pt. 1. Selection of the Self-Lubricating Composite Retainer Material, Lubr. Eng., 1981, vol. 37, no. 11, pp. 641–656.
20. Zhang, Z., Breidt, C., Chang, L., et al., Enhancement of the Wear Resistance of Epoxy: Short Carbon Fiber, Graphite, PTFE, and Nano-TiO2, Composites A, 2004, vol. 35, pp. 1385–1392.10.1016/j.compositesa.2004.05.005 ↗
21. Chang, L., Zhang, Z., Zhang, H., and Schlarb, A.K., On the Sliding Wear of Nanoparticle Filled Polyamide 66 Composites, Comp. Sci. Techn., 2006, vol. 66, no. 16, pp. 3188–3198.10.1016/j.compscitech.2005.02.021 ↗
22. Briscoe, B.J., Steward, M.D., and Groszek, A.J., The Effect of Carbon Aspect Ratio on the Friction and Wear of PTFE, Wear, 1977, vol. 42, no. 1, pp. 99–107.10.1016/0043-1648(77)90171-5 ↗
23. Vinogradov, A.V. and Okhlopkova, A.A., Wear Resistance of Disperse-Filled Politetrafluorethylene and Critical Concentrations of Ultradispersed Filler, Trenie Iznos, 1995, vol. 16, no. 5, pp. 931–937.
24. Krasnov, A.P., Aderikha, V.N., Afonicheva, O.V., et al., About Systematization of Nanofillers of Polymer Composites, Trenie Iznos, 2010, vol. 31, no. 1, pp. 93–108.
25. Burris, D.L., Zhao, S., Duncan, R., et al., A Route to Wear Resistant PTFE via Trace Loadings of Functionalized Nanofillers, Wear, 2009, vol. 267, pp. 653–660.10.1016/j.wear.2008.12.116 ↗