Investigation of the Influence of Complex Fillers on the Properties and Structure of Polytetrafluoroethylene
Source abstract
Abstract
In this paper, the results of stress-strain behavior and tribological characteristics of polymer composites based on PTFE with complex fillers are presented. It is shown that the introduction of complex fillers significantly increases the wear resistance of polymer composites while maintaining stress-strain performance at a level of an unfilled polymer and a composite with only one filler. Structural studies were carried out for friction surfaces of polymeric composites by SEM and IR spectroscopy. Presented are the results of tribotechnical tests after preliminary wear-in of polymer composites. It is shown that secondary structures on friction surfaces of polymer composites are formed during wear-in, which leads to an increase in the wear resistance of materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Material Properties and Applications · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Okhlopkova, A.A., Physicochemical principles of the creation of tribotechnical materials based on polytetrafluoroethylene and ultradisperse ceramics, Doctoral (Eng.) Dissertation, Gomel, 2000.
2. Friedrich, K., Lu, Z., and Hager, A.M., Recent advances in polymer composites' tribology, Wear, 1995, vol. 190, no. 2, pp. 139–144.10.1016/0043-1648(96)80012-3 ↗
3. Avdeichik, S.V., et al., Mashinostroitel’nye ftorkompozity: struktura, tekhnologiya, primenenie. Monografiya (Machine Fluorocomposites: Structure, Technology, and Use. Monograph), Struk, V.A., Ed., Grodno: Grodnensk. Gos. Univ., 2012.
4. Goldade, V.A., et al., Structural Inhibited Plastics, in Plastics for Corrosion Inhibition, Berlin: Springer-Verlag, 2005, pp. 255–336.10.1007/b138595 ↗
5. Shelestova, V.A., et al., Change in the surface properties of carbon fibers as a result of plasmochemical modification, Mech. Compos. Mater., 2003, vol. 39, no. 5, pp. 467–472.10.1023/B:MOCM.0000003297.64907.14 ↗
6. Ohlopkova, A.A., Struchkova, T.S., Vasilev, A.P., and Alexeev, A.G., Studying the properties and structure of polytetrafluoroethylene filled with Belum modified carbon fibers, J. Frict. Wear, 2016, vol. 37, no. 6, pp. 529–534.10.3103/S1068366616060118 ↗
7. Ignat’eva, L.N. and Buznik, V.M., IR-spectroscopic examination of polytetrafluoroethylene and its modified forms, Russ. J. Gen. Chem., 2009, vol. 79, no. 3, pp. 677–685.10.1134/S1070363209030499 ↗
8. Sleptsova, S.A. and Kirillina, Yu.V., Development of polymer-silicate nanocomposites, Vestn. Sev.-Vost. Fed. Univ. im. M.K. Ammosova, 2013, vol. 10, no. 2, pp. 18–25.
9. Ye, J., Burris, D.L., and Xie, T., A review of transfer films and their role in ultra-low-wear sliding of polymers, Lubricants, 2016, vol. 4, no. 1, p. 4.10.3390/lubricants4010004 ↗
10. Harris, K.L., et al., PTFE tribology and the role of mechanochemistry in the development of protective surface films, Macromolecules, 2015, vol. 48, no. 11, pp. 3739–3745.10.1021/acs.macromol.5b00452 ↗