journal article·2008-01

On the wear resistance of high-speed steels

A. S. Chaus

Journal of Friction and Wear· Volume 29· Issue 1
Publisher page

Abstract

The wear resistance of cast and strained high-speed steels are evaluated and compared, and the regularities of variations in their structure and properties depending on the austenitizing temperature are described. The impact of modification on the wear resistance of tungsten-molybdenum high-speed steels has been studied. Data on the steels with improved wear resistance are reported
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced machining processes and optimization · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Gelin, F.D. and Chaus, A.S., Metallicheskie materialy (Metallic Materials), Minsk: Vysheishaya Shkola, 2007.
2. Badisch, E. and Mitterer, C., Abrasive Wear of High-speed Steels: Influence of Abrasive Particles and Primary Carbides on Wear Resistance, Tribology Int., 2003, vol. 36, no. 10, pp. 765–770.10.1016/S0301-679X(03)00058-6 ↗
3. Pippel, E., Woltersdorf, J., Pockl, G., and Lichtenegger, G., Microstructure and Nanochemistry of Carbide Precipitates in High-speed Steel S 6-5-2-5, Materials Characterization, 1999, vol. 43, no. 1, pp. 41–55.10.1016/S1044-5803(99)00003-0 ↗
4. Chaus, A.S., MeC Carbides in Cast High-speed Steels, Russian Metallurgy, 1999, no. 3, pp. 78–87.
5. Chaus, A.S., Influence of Modification and Alloying on the Wear Resistance of High-speed Steels, J. Friction and Wear, 1999, vol. 20, pp. 325–332.
6. Karagoz, S. and Fischmeister, H.F., Cutting Performance and Microstructure of High-speed Steels: Contributions of Matrix Strengthening and Undissolved Carbides, Metallurgical and Materials Transactions. A. Physical Metallurgy and Materials Science, 1998, vol. 29, no. 1, pp. 205–216.10.1007/s11661-998-0173-3 ↗
7. Zapata, W.C., Da Costa, C.E., and Torralba, J.M., Wear and Thermal Behavior of M2 High-speed Steel Reinforced with NbC, J. of Materials Sci., 1998, vol. 33, no. 12, pp. 3219–3225.10.1023/A:1004324729342 ↗
8. Bergman, F., Hedenqvist, P., and Hogmark, S., The Influence of Primary Carbides and Test Parameters on Abrasive and Erosive Wear of Selected PM High-speed Steels, Tribology Int., 1997, vol. 30, no. 3, pp. 183–191.10.1016/S0301-679X(96)00040-0 ↗
9. Vardavoulias, M., The Role of Hard 2nd Phases in the Mild Oxidation Wear Mechanism of High-Speed Steel-Based Materials, Wear, 1994, vol. 173, nos. 1–2, pp. 105–114.10.1016/0043-1648(94)90262-3 ↗
10. Soderberg, S. and Hogmark, S., Wear Mechanisms and Tool Life of High-Speed Steels Related to Microstructure, Wear, 1986, vol. 110, nos. 3–4, pp. 315–329.10.1016/0043-1648(86)90106-7 ↗
11. Soderberg, S., Bryggman, U., and Canales, A., Influence of Precipitation and Solution Strengthening on Abrasive Wear-Resistance, Wear, 1985, vol. 105, no. 1, pp. 1–17.10.1016/0043-1648(85)90002-X ↗
12. Geller, Yu.A., Instrumental’nye stali (Tool Steels), Moscow: Metallurgia, 1983.
13. Soderberg, S. Wear Mechanisms and Tool Life of High-speed Steels Related to Microstructure, Acta University Uppsala. Diss. Fac. Sci., 1982, vol. 632, pp. 23–33.
14. Kienaga, K. and Nakamura, H., Effect of Carbide Particle Size on Properties of High-speed Steels, Tetsu to Hagane. J. of the Iron and Steel Institute of Japan, 1977, vol. 63, no. 11, pp. 419–432.
15. Hellman, P., Aus Wirkungen eines seigerungslosen Gefuges bei Schnellarbeitsstahlen, Werkstatt und Betrib, 1976, vol. 109, no. 6, pp. 523–528.
16. Leban, K., Die “Super”-Schnellarbeitsstahle, Zeitschrift fur Wirtschaftliche Fertigung, 1975, vol. 70, no. 3, pp. 138–146.
17. Huber, H., Der Einfluß der Austenitisierungs und Abschreckbedingungen auf die Mengen-und Grobenvertelungen der Karbide bei geharteten Werkzeugstahlen, Nordrhein-Westfalen Forschungsberichte, 1974, no. 2397, pp. 1–76.10.1007/978-3-322-88263-9 ↗
18. Arai, T. and Kamacu, N., Dependence between Wear Resistance and Heat Treatment/Structure of High-speed Steels, Tetsu to Hagane. J. of the Iron and Steel Institute of Japan, 1973, vol. 59, no. 6, pp. 738–751.10.2355/tetsutohagane1955.59.6_738 ↗
19. Berry, J. T., Neue Erkenntnisse in der Behandlung von Schnellarbeitstahlen, Techn. Mitt., 1971, vol. 64, nos. 1–2, pp. 37–49.
20. Chaus, A.S., Rudnitskii, F.I., and Murgash, M., Structural Heredity and Features of Destruction of High-speed Steels, Metallovedenie i Termicheskaya Obrabotka Metallov, 1997, no. 2, pp. 9–11.10.1007/BF02467662 ↗
21. Revis, I.A. and Lebedev, T.A., Struktura i svoistva litogo rezhushchego instrumenta (Structure and Properties of Cast Cutting Tool), Leningrad: Mashinostroenie, 1972.
22. Gudremon, E., Spetsial’nye stali (Special Steels), 2 vols., Moscow: Metallurgiy, 1966.
23. Kalashnikov, N.F. and Govorov, A.A., Influence of Primary Cast Structure on the Efficiency of Cast Cutting Tool, Izv. vuzov. Chernaya metallurgia, 1968, no. 12, pp. 120–122.
24. Nekrasov, S.S., Comparative Evaluation of Different Methods for Casting of Cutting Tool, in Litoi i Naplavlennyi Instrument, Moscow, Mashgiz, 1951, pp. 216–225.
25. Penskii, A.P. and Razuvaeva, Z.L., Litoi instrument, ne trebuyushchii termicheskoi obrabotki (Cast Tool Not Demanding Heat Treatment), Moscow-Leningrad: Mashgiz, 1946.
26. Chaus, A.S., Structure and Phase Transformations upon Carburization of High-speed Steel, Defect and Diffusion Forum, 2006, vol. 249, pp. 269–274.10.4028/www.scientific.net/DDF.249.269 ↗
27. Chaus, A.S., Murgash, M., Latyshev, I.V., and Tot, P., Heat Treatment of Cast Carburized High-speed Steel Alloyed with Ti, Nb, and V, Metallovedenie i termicheskaya Obrabotka Metallov, 2001, no. 6, pp. 8–11.10.1023/A:1012317911735 ↗
28. Chaus, A.S. and Latyshev, I.V., Influence of Vanadium, Titanium, and Niobium on Formation of the Structure of Cast W-Mo High-speed Steel, Fizika Metallov i Metallovedenie, 1999, vol. 88, no. 5, pp. 50–57.
29. Chaus, A.S., Structure and Properties of Cast Carburized High-speed Steel, Izv. Vuzov. Chernaya Metallurgia, 1998, no. 11, pp. 40–43.10.1007/BF02466219 ↗
30. Chaus, A.S., Chovanec, J., and Legerská, M., Development of High-speed Steels for Cast Metal-Cutting Tools, Solid State Phenomena, 2006, vol. 113, pp. 559–564.10.4028/www.scientific.net/SSP.113.559 ↗
31. Chaus, A.S. and Murgash, M., Features of Structure and Properties of Complex-Alloyed Cast Steel and High-Chrome Tool Steel, Metally, 2000, no. 5, pp. 67–76.
32. Chaus, A.S., Legerska, M., Rudnitskii, F.I., Konstantyuk, A.N., and Rudnitskii, K.F., The Prospects for Using High-speed Steels to Produce Cast Metal-Cutting Tool. Features of Structure and Properties of Cast Metal-Cutting Tool, Lit’e i Metallurgiy, 2004, no. 2, pp. 90–97.
33. State Standard 192650-73. Rods and Bands Made of High-Speed Steel.
34. Chaus, A.S., Liate rý chlorezné ocele a ich tepelné spracovanie, Proc. of the Int. Conf. “Vakuové tepelné zpracování a tepelné zpracování nástrojů,” Trenčín, 2003, pp. 137–146.
35. Chaus, A.S., Application of Bismuth for Solidification, Structure Refinement and Properties Enhancement in Cast High-speed Steels, ISIJ Int., 2005, vol. 45, no. 5, pp. 1297–1306.10.2355/isijinternational.45.1297 ↗
36. Chaus, A.S., Modification of Cast High-speed Steels with Niobium, Zirconium, and Titanium, Metallovedenie i Termicheskaya Obrabotka Metallov, 2005, no. 2, pp. 16–21.10.1007/s11041-005-0031-5 ↗
37. Chaus, A.S., Usage of P3M-Based Modifiers to Improve the Structure and Properties of Tungsten-Molybdenum High-Speed Steels, Metallovedenie i Termichskaya Obrabotka Metallov, 2004, no. 10, pp. 12–17.
38. Chaus, A.S., Legerska, M., Rudnitskii, F.I., Konstantyuk, A.N., and Rudnitskii, K.F., Perspectives for Using High-speed Steels to Produce Cast Metal-Cutting Tool. Ways for Structure and Properties Improvement, Lit’e i Metallurgia, 2004, no. 2, pp. 98–104.
39. Chaus, A.S., On the Mechanism of the Effect of Boron in Cast Tungsten-Molybdenum High-speed Steels, Fizika Metallov i Metallovedenie, 2001, vol. 91, no. 5, pp. 36–46.
40. Chaus, A.S., Modifying Effect of Bismuth in Cast High-Speed Steels, Vestsi NANB. Ser. Fiz.-tech. nauk, 2000, no. 2, pp. 10–17.
41. Chaus, A.S., On Perspectives of Using Low-Alloyed Tungsten-Free High-speed Steel 11M5Φ in Cast Tool, Metallovedenie i Termicheskaya Obrabotka Metallov, 1998, no. 8, pp. 15–20.10.1007/BF02466219 ↗
42. Chaus, A.S. and Rudnitskii, F.I., Influence of Modification on the Structure and Properties of Tungsten-Molybdenum High-Speed Steels, Metallovedenie i Termicheskaya Obrabotka Metallov, 1989, no. 2, pp. 27–32.10.1007/BF00738146 ↗
43. Chaus, A.S., Levitan, V.B., Budrovskii, V.V., and Sushko, V.V., USSR Inventor’s Certificate 1474179, Byull. Izobret., 1989, no. 15.
44. Chaus, A.S., Features of Tool Wear Made of Cast and Rolled High-Speed Steels in Milling, Trenie i Iznos, 2000, vol. 21, no. 4, pp. 444–500 [J. Friction and Wear (Engl. Transl.), vol. 21, no. 4, pp. 94–99].
45. Chaus, A.S., Features of Tool Wear Made of Cast and Rolled High-speed Steels in Turning, Trenie i iznos, 1999, vol. 20, no. 4, pp. 388–392 [J. Friction and Wear (Engl. Transl.), vol. 20, no. 4, pp. 30–33].
46. Sobolev, V.F., Chaus, A.S., Buchinskii, V.V., and Bundin, V.P., Cast High-Speed Tool, Peredovoi Proizvodstvennyi Opyt, 1983, no. 8, pp. 36–40.
47. Rudnitskii, F.I., Features of Tool Operation Made of Cast High-Speed Steel, Lit’e i Metallurgia, 2006, no. 2, pp. 173–177.
48. Cherkasov, V.E., Yakshin, N.M., and Kavitskii, I.M., Impact-Fatigue Strength of Cast and Strained Steels, Metallovedenie i Termicheskaya Obrabotka Metallov, 1986, no. 4, pp. 10–12.10.1007/BF00707646 ↗