Consideration of the multizone hydrodynamic friction, the misalignment of axes, and the contact compliance of a shaft and a bush of sliding bearings
Source abstract
Abstract
The second version of the original Bearing Builder Finite Element Method (BBFEM) software and its application for analyzing the hydrodynamics of cylindrical sliding bearings has been briefly described. The two-dimensional problem of the lubricating fluid flow in a bearing clearance taking into consideration the different types of deviations in the contact surface from a cylindrical shape has been solved by the finite element method. The bearing design that leads to the formation of several hydrodynamic friction zones (fluid wedges) has been considered. The role of the contact compliance of a shaft and a bush and the operation factors that cause the deviation from the initial cylindrical shape of a bearing, including the deformations and the misalignment of the shaft and bush is shown by citing specific examples of antifriction composites of different compositions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Tribology and Lubrication Engineering · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Zernin, M.V., Mishin, A.V., Rybkin, N.N., and Shil’ko, S.V., Hydrodynamic analysis of friction bearings, Part 1: Consideration of noncylindrical working surfaces, J. Frict. Wear, 2014, vol. 35, no. 5, pp. 396–406.10.3103/S106836661405016X ↗
2. Beskletnyi, M.B. and Igumentsev, B.A., Method for calculation of the forced vibrations of a rotor of turbomachines with sliding bearings fixed on damping supports, Energomashinostroenie, 1980, no. 3, pp. 7–9.
3. Kumar, A., Sinhasan, R., and Singh, D.V., Performance characteristics of two-lobe hydrodynamic journal bearings, J. Lubr. Tech., 1980, vol. 102, no. 4, pp. 425–429.10.1115/1.3251576 ↗
4. Voskresenskii, V.A. and D’yakov, V.I., Raschet i proektirovanie opor skol’zheniya (zhidkostnaya smazka) (Calculation and Engineering of the Slip Bearings (Liquid Lubrication)), Moscow: Mashinostroenie, 1980.
5. Kuz’menko, A.G. and Zernin, M.V., Obespechenie iznosostoikosti izdelii. Raschety rabotosposobnosti podshipnikov skol’zheniya (tipa “val-vtulka”) po kriteriyam prochnosti i iznosostoikosti. Raschet kontaktnykh davlenii i napryazhenii pri sukhom i granichnom trenii: Metodologicheskie rekomendatsii MR 215–86M (Ensuring the Wear-Resistance of the Products. Calculations of Operation Efficiency of the Sliding Bearings (“Shaft- Bush” Type) by Durability and Wear-Resistance. Calculation of the Contact Pressure and Stresses at the Dry and Boundary Friction: Methodological Recommendations MR 215–86M), Moscow: Vseross. Nauchno- Issled. Inst. Mashinostr., 1986.
6. McCarthy, D.M.C. and Glavatskih, S.B., Assessment of polymer composites for hydrodynamic journal-bearing applications, Lubr. Sci., 2009, vol. 21, no. 8, pp. 331–41.10.1002/ls.92 ↗
7. Nilsson, D. and Prakash, B., Static/dynamic friction and wear of some selected polymeric materials for conformal tribo-pairs under boundary lubrication conditions, Friction, 2013, vol. 1, no. 3, pp. 232–241.10.1007/s40544-013-0020-4 ↗
8. Shil’ko, S.V., Starzhinsky, V.E., Petrokovets, E.M., and Chernous, D.A., Two-level calculation method for tribojoints made of dispersion-reinforced composites: Part 2, J. Frict. Wear, 2014, vol. 35, no. 1, pp. 40–47.10.3103/S1068366614010085 ↗