Tribological properties of the AZ91D magnesium alloy hardened with silicon carbide and by severe plastic deformation
Source abstract
Abstract
Results of investigation of the tribological contact characteristics of R18 tool steel in interface with AZ91D magnesium alloy hardened with SiC disperse powder filler and by severe plastic deformation (SPD)—specifically, equal-channel angular pressing (ECAP)—are presented. It is established that introduction of the SiC powder filler into the magnesium alloy increases the friction coefficient and reduces the wear rate. The size and volume of the powder filler particles, the normal load, and the relative sliding velocity influence these tribological characteristics. SPD of the original material leads to reduction of the molecular component of the friction coefficient.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Harrington, W.C., Metal Matrix Composites Applications, Mech. Prop. Met. Comp., Ed. Ochiai, S., New York: Marcel-Dekker, 1994, pp. 759–773.
2. Kaczmar, J.W., Pietrzak, K., and Wlosinski, W., The Production and Application of Metal Matrix Composite Materials, J. Mater. Proces. Technol., 2000, vol. 106, pp. 58–67.10.1016/S0924-0136(00)00639-7 ↗
3. Yeong, W.M., Influence of Types of Reinforcements on Properties of Magnesium Alloy, Eng. Thesis, National University of Singapore, 2000.
4. Reddy, S.U., Srikanth, N., Gupta, M., and Sinha, S.K., Enhancing the Properties of Magnesium Using Sic Particulates in Sub-Micron Length Scale, Adv. Eng. Mater., 2004, Vol. 6, no. 12, pp. 957–964.10.1002/adem.200400105 ↗
5. Saravanan, R.A. and Surappa, M.K., Fabrication and Characterization of Pure Magnesium K30 vol. % SiC Particle Composite, Mater. Sci. Eng., 2000, vol. 276, pp. 108–116.10.1016/S0921-5093(99)00498-0 ↗
6. Galdin, N.M., Chernega, D.F., and Ivanchuk, D.F., Tsvetnoe lit’ye. Spravochnik (Nonferrous Castings, Ref. Manual), Moscow: Mashinostroenie, 1989.
7. Reshetov, D.N., Mashinostroenie. Detali mashin. Trenie, iznos, smazka. T. IV-1 (Machine Building Friction, Wear, Lubrication. vol. IV-1), Moscow: Mashinostroenie, 1995.
8. Valiev, R.Z. and Aleksandrov, I.V., Obyemnye nanostrukturnye metallicheskie materially: poluchenie, struktura i svoiistva (Volume Nanostructural Metallic Materials: Production, Structure and Properties), Moscow, IKTs Akademkniga, 2007.
9. Valiev, R.Z., Estrin, Y., Horita, Z., et al., Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation, J. Metals, 2006, vol. 58, no. 4, pp. 33–39.
10. Huang, S.-J. and Liu, H.-W., Viscoelastic Analysis for Adhesive Layer of Composite Sandwich Plates, The Chinese J. Mech., 2003, vol. 19, no. 2, pp. 57–68.
11. Sinha, S.K., Reddy, S.U., and Gupta, M., Scratch Hardness and Mechanical Property Correlation for Mg/SiC and Mg/SiC/Ti Metal-Matrix Composites, Trib. Int., 2006, vol. 39, pp. 184–189.10.1016/j.triboint.2005.04.017 ↗
12. Valiev R.Z., Development of Nanostructural metals and Alloys with Unique Properties using Intensive Polymer Deformation, Ross. nanotekhnol., 2006, vol. 1, nos 1–2, pp. 208–216.
13. Raab, G., The Problem of Industrial Production of Superfine Granular Materials, Fiz. Tekhn. Vys. Davl., 2004, vol. 15, no. 1, pp. 72–80.
14. Shuster, L.Sh., Adgezionnoe vzaimodeiistvie tverdykh metallicheskikh tel (Adhesive Interactions between Solid Metallic Bodies), Ufa: Gilem, 1999.
15. Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Principles of Friction and Wear Calculations), Moscow: Mashinostroenie, 1997.
16. Semenov, V.I., Shuster, L.Sh., Chertovskikh, S.V., and Raab, G.I., Influence of the Complex Parameter of the Friction Contact and the Material Structure on the Strength of Adhesive Bonds, Tren. Iznos, 2005, vol. 26, no. 1, pp. 74–79.