journal article·2025-08

Studies of Innovative Wear-Resistant Coatings for High-Speed Machining

M. Sh. Migranov, M. P. Kozochkin, A. S. Gusev, A. A. Maslov, Yu. O. Pristinskii

Journal of Friction and Wear· Volume 46· Issue 4
Publisher page

Abstract

Abstract This study aims at enhancing the efficiency of high-speed edge cutting of heat-resistant alloys. The enhancement is based on improving the tribotechnical characteristics of wear-resistant coatings by using multicomponent target cathodes made from sintered high-entropy alloys deposited by the magnetron method. Technologies for producing high-entropy target cathodes (with a diameter of 20 and 70 mm) obtained by high-temperature spark plasma sintering with various content of Al, Cr, Hf, Mo, Nb, Ni, Ta, Ti, V, W, and Zr have been developed; control of their parameters, density, grain-size composition, electrical conductivity, hardness, and crack resistance is provided. The morphology of the sintered samples was examined by scanning electron microscopy and non-dispersive analysis. Production equipment for magnetron coating systems in various gas media is manufactured. Tribotechnical tests were carried out using tribometers and during edge cutting of various grades of steels and alloys. The test results were used to determine the most effective compositions of multilayer composite nanostructured high-entropy wear-resistant coatings, in particular, Al20Ti20Zr15V15Cr15Nb15 and Al20Hf10Ni15Ti25W10Zr20, which provide improved cutting performance of EI654 and EI698VD chromium-nickel alloys. Comparative tests of commercially used wear-resistant coatings and coatings made of high-entropy target cathodes: Al20Hf10Ni15Ti25W10Zr20, Al20Ti20Zr15V15Cr15Nb15, Al20Hf15V15Cr15Ti15Ta10W10, Ti15Zr15Cr15Ni10W10V10Nb15Al10, Ti20Hf15Mo15W10V10Nb15Al15, Ti40Zr10Cr10Ni10W10Mo10Nb10, etc., were carried out. Studies in the longitudinal turning of EI-654 and EI‑698VD chromium-nickel alloys confirmed that the efficiency of using high-entropy coatings on a cutting tool increases on average by 20–25%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Surface Treatment and Coatings · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Vereshchaka, A.A., Grigor’ev, S.N., and Tabakov, V.P., Mnogosloinye nanostrukturirovannye iznosostoikie pokrytiya dlya metallorezhushchego instrumenta (Multilayer Nanostructured Wear Resistant Coatings for Metal Cutting Tools), Moscow: Infra-Inzheneriya, 2025.
2. Kumar, J., Linda, A., Sadhasivam, M., Pradeep, K.G., Gurao, N.P., and Biswas, K., The effect of Si addition on the structure and mechanical properties of equiatomic CoCrFeMnNi high entropy alloy by experiment and simulation, Materialia, 2023, vol. 27, p. 101707. https://doi.org/10.1016/j.mtla.2023.10170710.1016/j.mtla.2023.101707 ↗
3. Zhang, Yi., Wang, D., and Wang, Sh., High-entropy alloys for electrocatalysis: Design, characterization, and applications, Small, 2022, vol. 18, no. 7, p. 2104339. https://doi.org/10.1002/smll.20210433910.1002/smll.202104339 ↗
4. Zhou, Yu., Shen, X., Qian, T., Yan, Ch., and Lu, J., A review on the rational design and fabrication of nanosized high-entropy materials, Nano Res., 2023, vol. 16, no. 5, pp. 7874–7905. https://doi.org/10.1007/s12274-023-5419-210.1007/s12274-023-5419-2 ↗
5. Meng, F., Zhang, W., Zhou, Zh., Sheng, R., Chuang, N.P., Wu, Ch., Huang, H., Zhang, Sh., Zhang, H., Zhu, L., Jiang, L., Liaw, P.K., Chen, Sh., and Tong, Ya., Charge transfer effect on local lattice distortion in a HfNbTiZr high entropy alloy, Scr. Mater., 2021, vol. 203, p. 114104. https://doi.org/10.1016/j.scriptamat.2021.11410410.1016/j.scriptamat.2021.114104 ↗
6. Rogachev, A.S., Structure, stability, and properties of high-entropy alloys, Phys. Met. Metallogr., 2020, vol. 121, no. 8, pp. 733–764. https://doi.org/10.1134/s0031918x2008009810.1134/s0031918x20080098 ↗
7. Migranov, M.Sh., Shekhtman, S.R., and Gusev, A.S., Synthesizing low-wear cathodic coatings from multi-component alloys with a high-entropy effect, Proceedings of the 9th International Conference on Industrial Engineering. ICIE 2023, Radionov, A.A. and Gasiyarov, V.R., Eds., Lecture Notes in Mechanical Engineering, Cham: Springer, 2023, pp. 718–728. https://doi.org/10.1007/978-3-031-38126-3_7110.1007/978-3-031-38126-3_71 ↗
8. Grigoriev, S.N., Migranov, M.Sh., Shekhtman, S.R., Sukhova, N.A., and Gusev, A.S., Synthesizing high-entropy cutting tool coatings using the magnetron sputtering method, Proceedings of the 10th International Conference on Industrial Engineering. ICIE 2024, Radionov, A.A. and Gasiyarov, V.R., Eds., Lecture Notes in Mechanical Engineering, Cham: Springer, 2024, pp. 774–782. https://doi.org/10.1007/978-3-031-65870-9_7210.1007/978-3-031-65870-9_72 ↗
9. Grigor’ev, S.N., Migranov, M.Sh., Volosova, M.A., and Gusev, A.S., Sintered powder high-entropy target cathodes for wear-resistant coatings, Izvestiya. Ferrous Metallurgy, 2023, vol. 66, no. 4, pp. 410–414. https://doi.org/10.17073/0368-0797-2023-4-410-41410.17073/0368-0797-2023-4-410-414 ↗
10. Legaev, V.P., Generalov, L.K., and Galkovskii, O.A., An analytical review of existing hypotheses about the physics of friction, Vestnik Moskovskogo Aviatsionnogo Instituta, 2019, vol. 26, no. 1, pp. 174–181.10.34759/vst-2019-4-174-183 ↗
11. Shuster, L.Sh. and Migranov, M.Sh., Adhesive interaction study instrument, RF Patent 34249, 2003.
12. Shuster, L.Sh., Krioni, N.K., Sholom, V.Yu., and Migranov, M.Sh., Pokrytiya i smazka v vysokotemperaturnykh podvizhnykh sopryazheniyakh i metalloobrabotke (Coatings and Lubrication in High Temperature Moving Couplings and Metalworking), Moscow: Mashinostroenie, 2008.
13. An, Z., Mao, Sh., Liu, Yi., Wang, L., Zhou, H., Gan, B., Zhang, Z., and Han, X., A novel HfNbTaTiV high-entropy alloy of superior mechanical properties designed on the principle of maximum lattice distortion, J. Mater. Sci. Technol., 2021, vol. 79, pp. 109–117. https://doi.org/10.1016/j.jmst.2020.10.07310.1016/j.jmst.2020.10.073 ↗
14. Ye, Y.F., Wang, Q., Lu, J., Liu, C.T., and Yang, Y., High-entropy alloy: Challenges and prospects, Mater. Today, 2016, vol. 19, no. 6, pp. 349–362. https://doi.org/10.1016/j.mattod.2015.11.02610.1016/j.mattod.2015.11.026 ↗
15. Yurchenko, N.Yu., Development and research of high-entropy alloys with high specific strength based on Al–Cr–Nb–Ti–V–Zr system, Cand. Sci. (Eng.) Dissertation, Belgorod, 2019.