Calculating the Friction Force at Rest in Joints of Similar Hardness Assembled with Tightness
Source abstract
Abstract
The dependencies for determining the axial frictional force at rest in cylindrical joints assembled with a thermal tightness at different hardness ratios of the materials of the parts were investigated in this work. It is shown that the values of the friction coefficient may significantly differ depending on phenomena occurring in the contact of the microroughness of the mating rough surfaces of the parts. The obtained dependence for the determination of the friction force was experimentally proved. The application of the developed method for determining the friction force at rest allows reliable values of the bearing strength of the pressure joint to be obtained and reveals the unused reserves of the bearing strength. The developed method may be used in the design of pressure joints.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Adhesion, Friction, and Surface Interactions · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Izmailov, V.V., Novoselova, M.V., and Chaplygin, S.A., On the experimental techniques for assessing the specific friction force and its parameters, J. Frict. Wear, 2017, vol. 38, no. 5, pp. 369–376.10.3103/S106836661705004X ↗
2. Donskov, A.S., Mathematical modeling of individual asperity sliding on the elastic-plastic half space, J. Frict. Wear, 2016, vol. 37, no. 3, pp. 191–197.10.3103/S1068366616030053 ↗
3. Izmailov, V.V. and Novoselova, M.V., Contact interaction at a microscale level under static friction conditions, J. Frict. Wear, 2015, vol. 36, no. 6, pp. 487–495.10.3103/S1068366615060069 ↗
4. Matlin, M.M., Kazankina, E.N., and Kazankin, V.A., Calculation of actual area in the contact of a single microasperity modeled by a cone with a smooth surface of the part, J. Frict. Wear, 2011, vol. 32, no. 2, pp. 140–144.10.3103/S1068366611020073 ↗
5. Drozd, M.S., Matlin, M.M., and Sidyakin, Yu.I., Inzhenernye raschety uprugoplasticheskoi kontaktnoi deformatsii (Engineering calculations of elastic-plastic contact deformation), Moscow: Mashinostroenie, 1986.
6. Matlin, M.M., Kazankina, E.N., and Kazankin, V.A., Contact rigidity of parts with similar hardness, Russ. Eng. Res., 2016, vol. 36, no. 4, pp. 273–276.10.3103/S1068798X16040110 ↗
7. GOST (State Standard) 18 835-73: Metals. Method for Determination of Plastic Hardness, Moscow: Izd. Standartov, 1973.
8. Goryacheva, I.G. and Dobychin, M.N., Some results concerning the development of the molecular-mechanical theory of friction, J. Frict. Wear, 2008, vol. 29, no. 4, pp. 243–250.10.3103/S1068366608040016 ↗
9. Demkin, N.B. and Ryzhov, E.V., Kachestvo poverkhnosti i kontakt detalei mashin (Quality of Surface and Contact of Machine Details), Moscow: Mashinostroenie, 1981.
10. Birger, I.A., Shorr, B.F., and Iosilevich, G.B., Raschet na prochnost’ detalei mahsin: Spravochnik (Calculation for the Strength of Machine Parts: Handbook), Moscow: Mashinostroenie, 1993.