Generalized Assessment of Wear Resistance of Polymer Materials for Metal-Polymer Plain Bearings
Source abstract
Abstract
Abstract In order to optimally select antifriction polymer materials (PMs) for metal-polymer plain bearings, the method of system triboanalysis is considered, including model tribotesting of PMs and calculation of generalized wear resistance characteristics depending on specific friction forces. The method is used to assess the wear resistance of several existing PMs (polyamide, polytetrafluoroethylene, polyacetal, polyethylene terephthalate, and polyetheretherketone) and composites based on them. Experimental studies are performed using an end-friction tribometer. The obtained wear resistance characteristics are the basic parameters of a well-known mathematical model describing the kinetics of material wear during sliding friction and an analytical method for calculating metal-polymer plain bearings. The research results are presented in the form of diagrams covering a wide range of specific friction forces, which allows for a visual comparison of antifriction PMs by wear resistance. The friction patterns of PMs in a pair with 45 steel are established, the qualitative and quantitative influence of the filler type on the wear resistance of the specified polymer materials is analyzed. In each group of PMs under consideration, a material with maximum wear resistance in comparison with the base (unfilled) polymer is found.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Science and Applications · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. ISO 7148-2: Plain bearings–Testing of the tribological behaviour of bearings materials. Part 2. Testing of polymer-based bearing materials, 2012.
2. Kalacska, G., An engineering approach to dry friction behaviour of numerous engineering plastics with respect to the mechanical properties, Express Polym. Lett., 2013, vol. 7, no. 2, pp. 199–210. https://doi.org/10.3144/expresspolymlett.2013.1810.3144/expresspolymlett.2013.18 ↗
3. Kulkarni, M.V., Elangovan, K., Hemachandra Reddy, K., and Basappa, S.J., Tribological behaviours of AVs and PA6 polymer metal sliding combinations under dry friction, water absorbed and electroplated conditions, J. Eng. Sci. Technol., 2016, no. 11, pp. 68–84.
4. Pogačnik, A., Kupec, A., and Kalin, M., Tribological properties of polyamide (PA6) in self-mated contacts and against steel as a stationary and moving body, Wear, 2017, vols. 378–379, pp. 17–26. https://doi.org/10.1016/j.wear.2017.01.11810.1016/j.wear.2017.01.118 ↗
5. Zsidai, L., De Baets, P., Samyn, P., Kalacska, G., Van Peteghem, A.P., and Van Parys, F., The tribological behaviour of engineering plastics during sliding friction investigated with small-scale specimens, Wear, 2002, vol. 253, nos. 5–6, pp. 673–688. https://doi.org/10.1016/s0043-1648(02)00149-710.1016/s0043-1648(02)00149-7 ↗
6. Seabra, L.C. and Baptista, A.M., Tribological behaviour of food grade polymers against stainless steel in dry sliding and with sugar, Wear, 2002, vol. 253, nos. 3–4, pp. 394–402. https://doi.org/10.1016/s0043-1648(02)00138-210.1016/s0043-1648(02)00138-2 ↗
7. Unal, H., Mimaroglu, A., Kadıoglu, U., and Ekiz, H., Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions, Mater. Des., 2004, vol. 25, no. 3, pp. 239–245. https://doi.org/10.1016/j.matdes.2003.10.00910.1016/j.matdes.2003.10.009 ↗
8. Mens, J.W.M. and de Gee, A.W.J., Friction and wear behaviour of 18 polymers in contact with steel in environments of air and water, Wear, 1991, vol. 149, nos. 1–2, pp. 255–268. https://doi.org/10.1016/0043-1648(91)90378-810.1016/0043-1648(91)90378-8 ↗
9. Siddiqui, M.Sh.N., Pogacnik, A., and Kalin, M., Influence of load, sliding speed and heat-sink volume on the tribological behaviour of polyoxymethylene (POM) sliding against steel, Tribol. Int., 2023, vol. 178, p. 108029. https://doi.org/10.1016/j.triboint.2022.10802910.1016/j.triboint.2022.108029 ↗
10. Pei, X. and Friedrich, K., Sliding wear properties of PEEK, PBI and PPP, Wear, 2012, vols. 274–275, nos. 274–275, pp. 452–455. https://doi.org/10.1016/j.wear.2011.09.00910.1016/j.wear.2011.09.009 ↗
11. Wielieba, W., Bezobsługowe Łożyska Ślizgowe z Polimerów Termoplastycznych, Wrocław: Wyd. Politechniki Wrocławskiej, 2013.
12. Rodriguez, V., Sukumaran, J., Schlarb, A.K., and De Baets, P., Influence of solid lubricants on tribological properties of polyetheretherketone (PEEK), Tribol. Int., 2016, vol. 103, pp. 45–57. https://doi.org/10.1016/j.triboint.2016.06.03710.1016/j.triboint.2016.06.037 ↗
13. Panin, S.V., Anh, N.D., Kornienko, L.A., Alexenko, V.O., Buslovich, D.G., and Shil’ko, S.V., Antifriction and mechanical properties of the thermoplastic matrix of polyetheretherketone-based composites, J. Frict. Wear, 2020, vol. 41, no. 4, pp. 310–317. https://doi.org/10.3103/s106836662004009110.3103/s1068366620040091 ↗
14. Chernets, M.V., Shil’ko, S.V., Pashechko, M.I., and Barshch, M., Wear resistance of glass- and carbon-filled polyamide composites for metal-polymer gears, J. Frict. Wear, 2018, vol. 39, no. 5, pp. 361–364. https://doi.org/10.3103/s106836661805006910.3103/s1068366618050069 ↗
15. Chernets, M., Chernets, J., Kindrachuk, M., and Kornienko, A., Methodology of calculation of metal-polymer sliding bearings for contact strength, durability and wear, Tribology in Industry, 2020, vol. 42, no. 4, pp. 572–581. https://doi.org/10.24874/ti.900.06.20.1010.24874/ti.900.06.20.10 ↗
16. Chernets, M., Shil’ko, S., Kornienko, A., and Pashechko, M., Triboanalysis of antifrictional materials based on polyamides for metal-polymer sliding bearings, J. Frict. Wear, 2023, vol. 44, no. 2, pp. 63–70. https://doi.org/10.3103/s106836662302003410.3103/s1068366623020034 ↗