Wear Resistance of a Nitrided Microporous Surface Made of Structural Steel Obtained by Electrolytic Plasma Treatment
Source abstract
Abstract
Abstract— The paper considers the results of studies on the wear resistance of machine parts made of structural steels during the formation of micropores in their surface layer by the dealloying method based on electrolytic plasma treatment. The technological conditions for the formation of a microporous surface layer by electrolytic plasma treatment with subsequent modification by ion implantation and ion nitriding are presented. It is shown that the creation of a microporous layer contributes to an increase in the tribotechnical characteristics of surfaces under lubrication conditions. It is shown that the use of the electrolyte-plasma surface treatment method allows high-performance formation of a microporous surface layer that does not require further mechanical processing, and in one technological cycle is able to polish it. It is shown that the use of preliminary preparation of the surface layer for nitriding using high-energy processing methods can significantly increase the wear resistance of the microporous layer. The results of comparative tests of microporous surfaces with various processing options are presented. It is shown that the use of microporous surfaces in conditions of friction with lubrication makes it possible to increase the wear resistance of 40X and 40KHN steels by about 1.5–2 times, and their nitriding provides an increase in wear resistance compared with simple traditional nitriding by about three times, and compared with microporous surfaces without nitriding by more than nine times.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanoporous metals and alloys · Electrodeposition and Electroless Coatings · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Lebedev, D.I., Vinokurov, G.G., and Struchkov, N.F., Open porosity and roughness of the surface of wearproof powder coatings, Izv. Samar. Nauch. Tsentra Ross. Akad. Nauk, 2018, vol. 20, no. 6, pp. 68–72.
2. Shneider, Yu.G. and Guzok, Ya.V., Influence of microrelief of rubbing pairs of hermetic refrigeration compressors on their durability, Khimicheskoe i Nefte-gazovoe Mashinostroenie, 1973, no. 5, pp. 30–32.10.1007/BF01155643 ↗
3. Rozhdestvenskii, Yu.V., Zadorozhnaya, E.A., Khozenyuk, N.A., and Gavrilov, K.V., Dinamika i smazka gidrodinamicheskikh tribosopryazhenii porshnevykh i rotornykh mashin (Dynamics and Lubrication of Hydrodynamic Tribocouplings of Piston and Rotor Machines), Moscow: Nauka, 2018.
4. Bashmur, K.A. and Petrovsky, E., Technological capabilities of cell relief to provide the performance properties of cylindrical surfaces of technological units, Vestnik Belgorodskogo Gosudarstvennogo Tekhnologicheskogo Universiteta im. V.G. Shukhova, 2022, vol. 7, no. 11, pp. 99–107. https://doi.org/10.34031/2071-7318-2022-7-11-99-10710.34031/2071-7318-2022-7-11-99-107 ↗
5. Saakiyan, L.S. and Efremov, A.P., Zashchita neftepromyslovogo oborudovaniya ot korrozii (Corrosion Protection of Oilfield Equipment), Moscow: Nedra, 1982.
6. Cherkez, M.B. and Bogorad, L.Ya., Khromirovanie (Chrome Plating), Leningrad: Mashinostroenie, 1978, 4th ed.
7. Alexeev, N.S., Kaporin, V.A., and Ivanov, S.V., Efficiency of microporous coatings grinding using coolant, Obrabotka Metallov (Tekhnologiya, Oborudovanie, Instrument), 2015, no. 2, pp. 6–16. https://doi.org/10.17212/1994-6309-2015-2-6-1610.17212/1994-6309-2015-2-6-16 ↗
8. Li, R. and Sieradzki, K., Ductile-brittle transition in random porous Au, Phys. Rev. Lett., 1992, vol. 68, no. 8, pp. 1168–1171. https://doi.org/10.1103/physrevlett.68.116810.1103/physrevlett.68.1168 ↗
9. Sun, Yu., Ren, Yi., and Yang, K., New preparation method of micron porous copper through physical vacuum dealloying of Cu–Zn alloys, Mater. Lett., 2016, vol. 165, pp. 1–4. https://doi.org/10.1016/j.matlet.2015.11.10210.1016/j.matlet.2015.11.102 ↗
10. Zhang, Zh., Wang, Ya., Qi, Zh., Zhang, W., Qin, J., and Frenzel, J., Generalized fabrication of nanoporous metals (Au, Pd, Pt, Ag, and Cu) through chemical dealloying, J. Phys. Chem. C, 2009, vol. 113, no. 29, pp. 12 629–12 636. https://doi.org/10.1021/jp811445a10.1021/jp811445a ↗
11. Erlebacher, J., An atomistic description of dealloying: Porosity evolution, the critical potential, and rate-limiting behavior, J. Electrochem. Soc., 2004, no. 151, p. c614. https://doi.org/10.1149/1.178482010.1149/1.1784820 ↗
12. Hryniewicz, T., Rokosz, K., and Rokicki, R., Electrochemical and XPS studies of AISI 316L stainless steel after electropolishing in a magnetic field, Corros. Sci., 2008, vol. 50, no. 9, pp. 2676–2681. https://doi.org/10.1016/j.corsci.2008.06.04810.1016/j.corsci.2008.06.048 ↗
13. Kulikov, I.S., Vashchenko, S.V., and Kamenev, A.Ya., Elektrolitno-plazmennaya obrabotka materialov (Electrolyte-Plasma Processing of Materials), Minsk: Belarusskaya Navuka, 2010.
14. Artsimovich, L.A. and Sagdeev, R.Z., Fizika plazmy dlya fizikov (Plasma Physics for Physicists), Moscow: Atomizdat, 1979.
15. Gall, D., Micromagnetism—Microstructure relations and the hysteresis loop, Handbook of Magnetism and Advanced Magnetic Materials, Gall, D., Ed., New York: Wiley, 2007, vol. 2, pp. 1–36. https://doi.org/10.1002/9780470022184.hmm21410.1002/9780470022184.hmm214 ↗