journal article·2023-10

Influence of Structure, Roughness, Microhardness, and Friction Coefficient of Zinc Coating on the Tightening Torque of a Threaded Connection

V. V. Efremov, O. S. Bondareva, O. S. Dobychina, C. K. Pilla

Journal of Friction and Wear· Volume 44· Issue 5
Publisher page

Abstract

Abstract— Samples of fasteners were studied: bolts, nuts, and washers with a zinc coating applied in various ways, namely galvanic, thermal diffusion, gas thermal, hot galvanization in molten zinc and in melt galfan (Zn + 5% Al), as well as with zinc lamellar coating. Data on roughness, microhardness, and friction coefficient of zinc coatings were obtained. It has been established that the thermal diffusion coating has the greatest hardness, and the coating obtained by hot-dip galvanizing in molten zinc has the least hardness. Maximum roughness Ra is observed in gas-thermal and thermal-diffusion coatings. The lowest roughness is found in coatings obtained by hot-dip galvanizing and galvanic deposition. The friction coefficients of coatings were studied in finger-disk geometry for all types of coatings. It has been established that zinc-lamella and thermal diffusion coatings have the highest coefficient of friction, and the lowest, gas-thermal coating and those obtained by hot-dip galvanizing. The nominal tightening torques for M3, M10, and M16 bolts are calculated. It has been established that the tightening torque of coatings applied by hot-dip galvanizing in molten zinc and gas-thermal spraying complies with the standards of RD 37.001.131–89. For other coatings, the friction coefficient requires adjustment through the use of lubricants or the application of additional coatings. The results can be used when choosing a zinc coating for fasteners.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Lubrication Engineering · Material Properties and Applications · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Polkin, V.I., Zinc for corrosion protection, Fundamenty, 2021, no. 1, pp. 68–71.
2. Pola, A., Tocci, M., and Goodwin, F.E., Review of microstructures and properties of zinc alloys, Metals, 2020, vol. 10, no. 2, p. 16.10.3390/met10020253 ↗
3. Chung, P.P., Wang, J., and Durandet, Y., Deposition processes and properties of coatings on steel fasteners, Friction, 2019, vol. 7, pp. 389–416.10.1007/s40544-019-0304-4 ↗
4. Croccolo, D., De Agostinis, M., and Fini, S., Tribological properties of bolts depending on different screw coatings and lubrications: An experimental study, Tribol. Int., 2017, vol. 107, pp. 199–205.10.1016/j.triboint.2016.11.028 ↗
5. Elmanov, I.M. and Darovskoi, G.V., Improvement of the accuracy of friction coefficient determination with Amsler-type friction machines, J. Frict. Wear, 2009, vol. 30, no. 4, pp. 297–304.10.3103/S1068366609040126 ↗
6. Nassar, S.A. and Zaki, A.M., Effect of coating thickness on the friction coefficients and torque-tension relationship in threaded fasteners, J. Tribol., 2009, vol. 131, no. 2, pp. 205–216.10.1115/1.3085941 ↗
7. Jiang, K., Liu, Z., Yang, C., Zhang, C., and Tian, Y., Effects of the joint surface considering asperity interaction on the bolted joint performance in the bolt tightening process, Tribol. Int., 2022, vol. 167, pp. 160–168.10.1016/j.triboint.2021.107408 ↗
8. Buloichik, I.A. and Konstantinov, V.M., Influence of sherardizing on working properties of metal parts subjected to prior heat treatment, Lit’ye Metall., 2020, no. 4, pp. 131–138.10.21122/1683-6065-2020-4-131-138 ↗
9. Satyendra, Y., Performance observation of hot dip galvanization for steel sheets, Mater. Today: Proc., 2021, vol. 46, pp. 6700–6703.
10. Swain, R.K., Upadhyay, P., Nag, A., Banerjee, A., Bhagat, A.N., Basu, A., and Mallik, A., Electro-galvanization of zinc and zinc-nickel onto mild steel for improved corrosion resistance, Mater. Today: Proc., 2022, vol. 62, pp. 6257–6264.
11. Arman, S.Y., Ramezanzadeh, B., Farghadani, S., Mehdipour, M., and Rajabi, A., Application of the electrochemical noise to investigate the corrosion resistance of an epoxy zinc-rich coating loaded with lamellar aluminum and micaceous iron oxide particles, Corros. Sci., 2013, vol. 77, pp. 118–127.10.1016/j.corsci.2013.07.034 ↗
12. Xiqiang, Z., Ruijie, L., Guanghua, L., and Wei, P., Zinc coating on steel by atmosphere plasma spray and their anti-corrosion behavior, Mater. Lett., 2022, vol. 314, pp. 3–7.